ExternalVendorCode/openwrt
1
0
Fork 0
mirror of https://github.com/openwrt/openwrt.git synced 2024-12-28 09:39:00 +00:00
Code Issues Actions 10 Packages Projects Releases Wiki Activity
99b00edf35
openwrt/package/kernel/mac80211/patches/subsys/010-sync-nl80211_h.patch
Felix Fietkau 05a8bf04ec mac80211: sync nl80211.h with upstream and backport a WPA3 related commit 
Fixes compatibility issues with the latest hostapd update

Signed-off-by: Felix Fietkau <nbd@nbd.name>
(cherry-picked from commit 91abeebd3b)
2021-06-17 12:44:57 +02:00

298 lines
12 KiB
Diff
Raw Blame History

--- a/include/uapi/linux/nl80211.h
+++ b/include/uapi/linux/nl80211.h
@@ -655,6 +655,9 @@
* When a security association was established on an 802.1X network using
* fast transition, this event should be followed by an
* %NL80211_CMD_PORT_AUTHORIZED event.
+ * Following a %NL80211_CMD_ROAM event userspace can issue
+ * %NL80211_CMD_GET_SCAN in order to obtain the scan information for the
+ * new BSS the card/driver roamed to.
* @NL80211_CMD_DISCONNECT: drop a given connection; also used to notify
* userspace that a connection was dropped by the AP or due to other
* reasons, for this the %NL80211_ATTR_DISCONNECTED_BY_AP and
@@ -757,7 +760,8 @@
* of any other interfaces, and other interfaces will again take
* precedence when they are used.
*
- * @NL80211_CMD_SET_WDS_PEER: Set the MAC address of the peer on a WDS interface.
+ * @NL80211_CMD_SET_WDS_PEER: Set the MAC address of the peer on a WDS interface
+ * (no longer supported).
*
* @NL80211_CMD_SET_MULTICAST_TO_UNICAST: Configure if this AP should perform
* multicast to unicast conversion. When enabled, all multicast packets
@@ -1177,6 +1181,10 @@
* includes the contents of the frame. %NL80211_ATTR_ACK flag is included
* if the recipient acknowledged the frame.
*
+ * @NL80211_CMD_SET_SAR_SPECS: SAR power limitation configuration is
+ * passed using %NL80211_ATTR_SAR_SPEC. %NL80211_ATTR_WIPHY is used to
+ * specify the wiphy index to be applied to.
+ *
* @NL80211_CMD_MAX: highest used command number
* @__NL80211_CMD_AFTER_LAST: internal use
*/
@@ -1407,6 +1415,8 @@ enum nl80211_commands {
NL80211_CMD_CONTROL_PORT_FRAME_TX_STATUS,
+ NL80211_CMD_SET_SAR_SPECS,
+
/* add new commands above here */
/* used to define NL80211_CMD_MAX below */
@@ -1750,8 +1760,9 @@ enum nl80211_commands {
* specify just a single bitrate, which is to be used for the beacon.
* The driver must also specify support for this with the extended
* features NL80211_EXT_FEATURE_BEACON_RATE_LEGACY,
- * NL80211_EXT_FEATURE_BEACON_RATE_HT and
- * NL80211_EXT_FEATURE_BEACON_RATE_VHT.
+ * NL80211_EXT_FEATURE_BEACON_RATE_HT,
+ * NL80211_EXT_FEATURE_BEACON_RATE_VHT and
+ * NL80211_EXT_FEATURE_BEACON_RATE_HE.
*
* @NL80211_ATTR_FRAME_MATCH: A binary attribute which typically must contain
* at least one byte, currently used with @NL80211_CMD_REGISTER_FRAME.
@@ -1955,8 +1966,15 @@ enum nl80211_commands {
* @NL80211_ATTR_PROBE_RESP: Probe Response template data. Contains the entire
* probe-response frame. The DA field in the 802.11 header is zero-ed out,
* to be filled by the FW.
- * @NL80211_ATTR_DISABLE_HT: Force HT capable interfaces to disable
- * this feature. Currently, only supported in mac80211 drivers.
+ * @NL80211_ATTR_DISABLE_HT: Force HT capable interfaces to disable
+ * this feature during association. This is a flag attribute.
+ * Currently only supported in mac80211 drivers.
+ * @NL80211_ATTR_DISABLE_VHT: Force VHT capable interfaces to disable
+ * this feature during association. This is a flag attribute.
+ * Currently only supported in mac80211 drivers.
+ * @NL80211_ATTR_DISABLE_HE: Force HE capable interfaces to disable
+ * this feature during association. This is a flag attribute.
+ * Currently only supported in mac80211 drivers.
* @NL80211_ATTR_HT_CAPABILITY_MASK: Specify which bits of the
* ATTR_HT_CAPABILITY to which attention should be paid.
* Currently, only mac80211 NICs support this feature.
@@ -2077,7 +2095,8 @@ enum nl80211_commands {
* until the channel switch event.
* @NL80211_ATTR_CH_SWITCH_BLOCK_TX: flag attribute specifying that transmission
* must be blocked on the current channel (before the channel switch
- * operation).
+ * operation). Also included in the channel switch started event if quiet
+ * was requested by the AP.
* @NL80211_ATTR_CSA_IES: Nested set of attributes containing the IE information
* for the time while performing a channel switch.
* @NL80211_ATTR_CNTDWN_OFFS_BEACON: An array of offsets (u16) to the channel
@@ -2527,6 +2546,20 @@ enum nl80211_commands {
* override mask. Used with NL80211_ATTR_S1G_CAPABILITY in
* NL80211_CMD_ASSOCIATE or NL80211_CMD_CONNECT.
*
+ * @NL80211_ATTR_SAE_PWE: Indicates the mechanism(s) allowed for SAE PWE
+ * derivation in WPA3-Personal networks which are using SAE authentication.
+ * This is a u8 attribute that encapsulates one of the values from
+ * &enum nl80211_sae_pwe_mechanism.
+ *
+ * @NL80211_ATTR_SAR_SPEC: SAR power limitation specification when
+ * used with %NL80211_CMD_SET_SAR_SPECS. The message contains fields
+ * of %nl80211_sar_attrs which specifies the sar type and related
+ * sar specs. Sar specs contains array of %nl80211_sar_specs_attrs.
+ *
+ * @NL80211_ATTR_RECONNECT_REQUESTED: flag attribute, used with deauth and
+ * disassoc events to indicate that an immediate reconnect to the AP
+ * is desired.
+ *
* @NUM_NL80211_ATTR: total number of nl80211_attrs available
* @NL80211_ATTR_MAX: highest attribute number currently defined
* @__NL80211_ATTR_AFTER_LAST: internal use
@@ -3016,6 +3049,14 @@ enum nl80211_attrs {
NL80211_ATTR_S1G_CAPABILITY,
NL80211_ATTR_S1G_CAPABILITY_MASK,
+ NL80211_ATTR_SAE_PWE,
+
+ NL80211_ATTR_RECONNECT_REQUESTED,
+
+ NL80211_ATTR_SAR_SPEC,
+
+ NL80211_ATTR_DISABLE_HE,
+
/* add attributes here, update the policy in nl80211.c */
__NL80211_ATTR_AFTER_LAST,
@@ -5896,6 +5937,19 @@ enum nl80211_feature_flags {
* @NL80211_EXT_FEATURE_UNSOL_BCAST_PROBE_RESP: Driver/device supports
* unsolicited broadcast probe response transmission
*
+ * @NL80211_EXT_FEATURE_BEACON_RATE_HE: Driver supports beacon rate
+ * configuration (AP/mesh) with HE rates.
+ *
+ * @NL80211_EXT_FEATURE_SECURE_LTF: Device supports secure LTF measurement
+ * exchange protocol.
+ *
+ * @NL80211_EXT_FEATURE_SECURE_RTT: Device supports secure RTT measurement
+ * exchange protocol.
+ *
+ * @NL80211_EXT_FEATURE_PROT_RANGE_NEGO_AND_MEASURE: Device supports management
+ * frame protection for all management frames exchanged during the
+ * negotiation and range measurement procedure.
+ *
* @NUM_NL80211_EXT_FEATURES: number of extended features.
* @MAX_NL80211_EXT_FEATURES: highest extended feature index.
*/
@@ -5956,6 +6010,10 @@ enum nl80211_ext_feature_index {
NL80211_EXT_FEATURE_SAE_OFFLOAD_AP,
NL80211_EXT_FEATURE_FILS_DISCOVERY,
NL80211_EXT_FEATURE_UNSOL_BCAST_PROBE_RESP,
+ NL80211_EXT_FEATURE_BEACON_RATE_HE,
+ NL80211_EXT_FEATURE_SECURE_LTF,
+ NL80211_EXT_FEATURE_SECURE_RTT,
+ NL80211_EXT_FEATURE_PROT_RANGE_NEGO_AND_MEASURE,
/* add new features before the definition below */
NUM_NL80211_EXT_FEATURES,
@@ -6253,11 +6311,13 @@ struct nl80211_vendor_cmd_info {
* @NL80211_TDLS_PEER_HT: TDLS peer is HT capable.
* @NL80211_TDLS_PEER_VHT: TDLS peer is VHT capable.
* @NL80211_TDLS_PEER_WMM: TDLS peer is WMM capable.
+ * @NL80211_TDLS_PEER_HE: TDLS peer is HE capable.
*/
enum nl80211_tdls_peer_capability {
NL80211_TDLS_PEER_HT = 1<<0,
NL80211_TDLS_PEER_VHT = 1<<1,
NL80211_TDLS_PEER_WMM = 1<<2,
+ NL80211_TDLS_PEER_HE = 1<<3,
};
/**
@@ -6849,6 +6909,9 @@ enum nl80211_peer_measurement_ftm_capa {
* if neither %NL80211_PMSR_FTM_REQ_ATTR_TRIGGER_BASED nor
* %NL80211_PMSR_FTM_REQ_ATTR_NON_TRIGGER_BASED is set, EDCA based
* ranging will be used.
+ * @NL80211_PMSR_FTM_REQ_ATTR_LMR_FEEDBACK: negotiate for LMR feedback. Only
+ * valid if either %NL80211_PMSR_FTM_REQ_ATTR_TRIGGER_BASED or
+ * %NL80211_PMSR_FTM_REQ_ATTR_NON_TRIGGER_BASED is set.
*
* @NUM_NL80211_PMSR_FTM_REQ_ATTR: internal
* @NL80211_PMSR_FTM_REQ_ATTR_MAX: highest attribute number
@@ -6867,6 +6930,7 @@ enum nl80211_peer_measurement_ftm_req {
NL80211_PMSR_FTM_REQ_ATTR_REQUEST_CIVICLOC,
NL80211_PMSR_FTM_REQ_ATTR_TRIGGER_BASED,
NL80211_PMSR_FTM_REQ_ATTR_NON_TRIGGER_BASED,
+ NL80211_PMSR_FTM_REQ_ATTR_LMR_FEEDBACK,
/* keep last */
NUM_NL80211_PMSR_FTM_REQ_ATTR,
@@ -7124,4 +7188,115 @@ enum nl80211_unsol_bcast_probe_resp_attr
NL80211_UNSOL_BCAST_PROBE_RESP_ATTR_MAX =
__NL80211_UNSOL_BCAST_PROBE_RESP_ATTR_LAST - 1
};
+
+/**
+ * enum nl80211_sae_pwe_mechanism - The mechanism(s) allowed for SAE PWE
+ * derivation. Applicable only when WPA3-Personal SAE authentication is
+ * used.
+ *
+ * @NL80211_SAE_PWE_UNSPECIFIED: not specified, used internally to indicate that
+ * attribute is not present from userspace.
+ * @NL80211_SAE_PWE_HUNT_AND_PECK: hunting-and-pecking loop only
+ * @NL80211_SAE_PWE_HASH_TO_ELEMENT: hash-to-element only
+ * @NL80211_SAE_PWE_BOTH: both hunting-and-pecking loop and hash-to-element
+ * can be used.
+ */
+enum nl80211_sae_pwe_mechanism {
+ NL80211_SAE_PWE_UNSPECIFIED,
+ NL80211_SAE_PWE_HUNT_AND_PECK,
+ NL80211_SAE_PWE_HASH_TO_ELEMENT,
+ NL80211_SAE_PWE_BOTH,
+};
+
+/**
+ * enum nl80211_sar_type - type of SAR specs
+ *
+ * @NL80211_SAR_TYPE_POWER: power limitation specified in 0.25dBm unit
+ *
+ */
+enum nl80211_sar_type {
+ NL80211_SAR_TYPE_POWER,
+
+ /* add new type here */
+
+ /* Keep last */
+ NUM_NL80211_SAR_TYPE,
+};
+
+/**
+ * enum nl80211_sar_attrs - Attributes for SAR spec
+ *
+ * @NL80211_SAR_ATTR_TYPE: the SAR type as defined in &enum nl80211_sar_type.
+ *
+ * @NL80211_SAR_ATTR_SPECS: Nested array of SAR power
+ * limit specifications. Each specification contains a set
+ * of %nl80211_sar_specs_attrs.
+ *
+ * For SET operation, it contains array of %NL80211_SAR_ATTR_SPECS_POWER
+ * and %NL80211_SAR_ATTR_SPECS_RANGE_INDEX.
+ *
+ * For sar_capa dump, it contains array of
+ * %NL80211_SAR_ATTR_SPECS_START_FREQ
+ * and %NL80211_SAR_ATTR_SPECS_END_FREQ.
+ *
+ * @__NL80211_SAR_ATTR_LAST: Internal
+ * @NL80211_SAR_ATTR_MAX: highest sar attribute
+ *
+ * These attributes are used with %NL80211_CMD_SET_SAR_SPEC
+ */
+enum nl80211_sar_attrs {
+ __NL80211_SAR_ATTR_INVALID,
+
+ NL80211_SAR_ATTR_TYPE,
+ NL80211_SAR_ATTR_SPECS,
+
+ __NL80211_SAR_ATTR_LAST,
+ NL80211_SAR_ATTR_MAX = __NL80211_SAR_ATTR_LAST - 1,
+};
+
+/**
+ * enum nl80211_sar_specs_attrs - Attributes for SAR power limit specs
+ *
+ * @NL80211_SAR_ATTR_SPECS_POWER: Required (s32)value to specify the actual
+ * power limit value in units of 0.25 dBm if type is
+ * NL80211_SAR_TYPE_POWER. (i.e., a value of 44 represents 11 dBm).
+ * 0 means userspace doesn't have SAR limitation on this associated range.
+ *
+ * @NL80211_SAR_ATTR_SPECS_RANGE_INDEX: Required (u32) value to specify the
+ * index of exported freq range table and the associated power limitation
+ * is applied to this range.
+ *
+ * Userspace isn't required to set all the ranges advertised by WLAN driver,
+ * and userspace can skip some certain ranges. These skipped ranges don't
+ * have SAR limitations, and they are same as setting the
+ * %NL80211_SAR_ATTR_SPECS_POWER to any unreasonable high value because any
+ * value higher than regulatory allowed value just means SAR power
+ * limitation is removed, but it's required to set at least one range.
+ * It's not allowed to set duplicated range in one SET operation.
+ *
+ * Every SET operation overwrites previous SET operation.
+ *
+ * @NL80211_SAR_ATTR_SPECS_START_FREQ: Required (u32) value to specify the start
+ * frequency of this range edge when registering SAR capability to wiphy.
+ * It's not a channel center frequency. The unit is kHz.
+ *
+ * @NL80211_SAR_ATTR_SPECS_END_FREQ: Required (u32) value to specify the end
+ * frequency of this range edge when registering SAR capability to wiphy.
+ * It's not a channel center frequency. The unit is kHz.
+ *
+ * @__NL80211_SAR_ATTR_SPECS_LAST: Internal
+ * @NL80211_SAR_ATTR_SPECS_MAX: highest sar specs attribute
+ */
+enum nl80211_sar_specs_attrs {
+ __NL80211_SAR_ATTR_SPECS_INVALID,
+
+ NL80211_SAR_ATTR_SPECS_POWER,
+ NL80211_SAR_ATTR_SPECS_RANGE_INDEX,
+ NL80211_SAR_ATTR_SPECS_START_FREQ,
+ NL80211_SAR_ATTR_SPECS_END_FREQ,
+
+ __NL80211_SAR_ATTR_SPECS_LAST,
+ NL80211_SAR_ATTR_SPECS_MAX = __NL80211_SAR_ATTR_SPECS_LAST - 1,
+};
+
#endif /* __LINUX_NL80211_H */
Reference in New Issue View Git Blame Copy Permalink