mirror of
https://github.com/openwrt/openwrt.git
synced 2024-12-25 00:11:13 +00:00
ee6ba216d8
Fix FDB learning bugs when VLAN filtering is enabled. Signed-off-by: DENG Qingfang <dqfext@gmail.com> Tested-by: Arınç ÜNAL <arinc.unal@arinc9.com> Tested-by: Stijn Tintel <stijn@linux-ipv6.be>
263 lines
9.2 KiB
Diff
263 lines
9.2 KiB
Diff
From e3a402764c5753698e7a9e45d4d21f093faa7852 Mon Sep 17 00:00:00 2001
|
|
From: DENG Qingfang <dqfext@gmail.com>
|
|
Date: Wed, 4 Aug 2021 00:04:02 +0800
|
|
Subject: [PATCH] net: dsa: mt7530: use independent VLAN learning on
|
|
VLAN-unaware bridges
|
|
|
|
Consider the following bridge configuration, where bond0 is not
|
|
offloaded:
|
|
|
|
+-- br0 --+
|
|
/ / | \
|
|
/ / | \
|
|
/ | | bond0
|
|
/ | | / \
|
|
swp0 swp1 swp2 swp3 swp4
|
|
. . .
|
|
. . .
|
|
A B C
|
|
|
|
Ideally, when the switch receives a packet from swp3 or swp4, it should
|
|
forward the packet to the CPU, according to the port matrix and unknown
|
|
unicast flood settings.
|
|
|
|
But packet loss will happen if the destination address is at one of the
|
|
offloaded ports (swp0~2). For example, when client C sends a packet to
|
|
A, the FDB lookup will indicate that it should be forwarded to swp0, but
|
|
the port matrix of swp3 and swp4 is configured to only allow the CPU to
|
|
be its destination, so it is dropped.
|
|
|
|
However, this issue does not happen if the bridge is VLAN-aware. That is
|
|
because VLAN-aware bridges use independent VLAN learning, i.e. use VID
|
|
for FDB lookup, on offloaded ports. As swp3 and swp4 are not offloaded,
|
|
shared VLAN learning with default filter ID of 0 is used instead. So the
|
|
lookup for A with filter ID 0 never hits and the packet can be forwarded
|
|
to the CPU.
|
|
|
|
In the current code, only two combinations were used to toggle user
|
|
ports' VLAN awareness: one is PCR.PORT_VLAN set to port matrix mode with
|
|
PVC.VLAN_ATTR set to transparent port, the other is PCR.PORT_VLAN set to
|
|
security mode with PVC.VLAN_ATTR set to user port.
|
|
|
|
It turns out that only PVC.VLAN_ATTR contributes to VLAN awareness, and
|
|
port matrix mode just skips the VLAN table lookup. The reference manual
|
|
is somehow misleading when describing PORT_VLAN modes. It states that
|
|
PORT_MEM (VLAN port member) is used for destination if the VLAN table
|
|
lookup hits, but actually **PORT_MEM & PORT_MATRIX** (bitwise AND of
|
|
VLAN port member and port matrix) is used instead, which means we can
|
|
have two or more separate VLAN-aware bridges with the same PVID and
|
|
traffic won't leak between them.
|
|
|
|
Therefore, to solve this, enable independent VLAN learning with PVID 0
|
|
on VLAN-unaware bridges, by setting their PCR.PORT_VLAN to fallback
|
|
mode, while leaving standalone ports in port matrix mode. The CPU port
|
|
is always set to fallback mode to serve those bridges.
|
|
|
|
During testing, it is found that FDB lookup with filter ID of 0 will
|
|
also hit entries with VID 0 even with independent VLAN learning. To
|
|
avoid that, install all VLANs with filter ID of 1.
|
|
|
|
Signed-off-by: DENG Qingfang <dqfext@gmail.com>
|
|
Reviewed-by: Vladimir Oltean <olteanv@gmail.com>
|
|
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
---
|
|
drivers/net/dsa/mt7530.c | 72 +++++++++++++++++++++++++++++-----------
|
|
drivers/net/dsa/mt7530.h | 9 ++++-
|
|
2 files changed, 60 insertions(+), 21 deletions(-)
|
|
|
|
--- a/drivers/net/dsa/mt7530.c
|
|
+++ b/drivers/net/dsa/mt7530.c
|
|
@@ -1011,6 +1011,10 @@ mt753x_cpu_port_enable(struct dsa_switch
|
|
mt7530_write(priv, MT7530_PCR_P(port),
|
|
PCR_MATRIX(dsa_user_ports(priv->ds)));
|
|
|
|
+ /* Set to fallback mode for independent VLAN learning */
|
|
+ mt7530_rmw(priv, MT7530_PCR_P(port), PCR_PORT_VLAN_MASK,
|
|
+ MT7530_PORT_FALLBACK_MODE);
|
|
+
|
|
return 0;
|
|
}
|
|
|
|
@@ -1165,6 +1169,10 @@ mt7530_port_bridge_join(struct dsa_switc
|
|
|
|
mt7530_clear(priv, MT7530_PSC_P(port), SA_DIS);
|
|
|
|
+ /* Set to fallback mode for independent VLAN learning */
|
|
+ mt7530_rmw(priv, MT7530_PCR_P(port), PCR_PORT_VLAN_MASK,
|
|
+ MT7530_PORT_FALLBACK_MODE);
|
|
+
|
|
mutex_unlock(&priv->reg_mutex);
|
|
|
|
return 0;
|
|
@@ -1177,16 +1185,21 @@ mt7530_port_set_vlan_unaware(struct dsa_
|
|
bool all_user_ports_removed = true;
|
|
int i;
|
|
|
|
- /* When a port is removed from the bridge, the port would be set up
|
|
- * back to the default as is at initial boot which is a VLAN-unaware
|
|
- * port.
|
|
+ /* This is called after .port_bridge_leave when leaving a VLAN-aware
|
|
+ * bridge. Don't set standalone ports to fallback mode.
|
|
*/
|
|
- mt7530_rmw(priv, MT7530_PCR_P(port), PCR_PORT_VLAN_MASK,
|
|
- MT7530_PORT_MATRIX_MODE);
|
|
+ if (dsa_to_port(ds, port)->bridge_dev)
|
|
+ mt7530_rmw(priv, MT7530_PCR_P(port), PCR_PORT_VLAN_MASK,
|
|
+ MT7530_PORT_FALLBACK_MODE);
|
|
+
|
|
mt7530_rmw(priv, MT7530_PVC_P(port), VLAN_ATTR_MASK | PVC_EG_TAG_MASK,
|
|
VLAN_ATTR(MT7530_VLAN_TRANSPARENT) |
|
|
PVC_EG_TAG(MT7530_VLAN_EG_CONSISTENT));
|
|
|
|
+ /* Set PVID to 0 */
|
|
+ mt7530_rmw(priv, MT7530_PPBV1_P(port), G0_PORT_VID_MASK,
|
|
+ G0_PORT_VID_DEF);
|
|
+
|
|
for (i = 0; i < MT7530_NUM_PORTS; i++) {
|
|
if (dsa_is_user_port(ds, i) &&
|
|
dsa_port_is_vlan_filtering(dsa_to_port(ds, i))) {
|
|
@@ -1212,15 +1225,14 @@ mt7530_port_set_vlan_aware(struct dsa_sw
|
|
struct mt7530_priv *priv = ds->priv;
|
|
|
|
/* Trapped into security mode allows packet forwarding through VLAN
|
|
- * table lookup. CPU port is set to fallback mode to let untagged
|
|
- * frames pass through.
|
|
+ * table lookup.
|
|
*/
|
|
- if (dsa_is_cpu_port(ds, port))
|
|
- mt7530_rmw(priv, MT7530_PCR_P(port), PCR_PORT_VLAN_MASK,
|
|
- MT7530_PORT_FALLBACK_MODE);
|
|
- else
|
|
+ if (dsa_is_user_port(ds, port)) {
|
|
mt7530_rmw(priv, MT7530_PCR_P(port), PCR_PORT_VLAN_MASK,
|
|
MT7530_PORT_SECURITY_MODE);
|
|
+ mt7530_rmw(priv, MT7530_PPBV1_P(port), G0_PORT_VID_MASK,
|
|
+ G0_PORT_VID(priv->ports[port].pvid));
|
|
+ }
|
|
|
|
/* Set the port as a user port which is to be able to recognize VID
|
|
* from incoming packets before fetching entry within the VLAN table.
|
|
@@ -1264,6 +1276,13 @@ mt7530_port_bridge_leave(struct dsa_swit
|
|
|
|
mt7530_set(priv, MT7530_PSC_P(port), SA_DIS);
|
|
|
|
+ /* When a port is removed from the bridge, the port would be set up
|
|
+ * back to the default as is at initial boot which is a VLAN-unaware
|
|
+ * port.
|
|
+ */
|
|
+ mt7530_rmw(priv, MT7530_PCR_P(port), PCR_PORT_VLAN_MASK,
|
|
+ MT7530_PORT_MATRIX_MODE);
|
|
+
|
|
mutex_unlock(&priv->reg_mutex);
|
|
}
|
|
|
|
@@ -1406,7 +1425,8 @@ mt7530_hw_vlan_add(struct mt7530_priv *p
|
|
/* Validate the entry with independent learning, create egress tag per
|
|
* VLAN and joining the port as one of the port members.
|
|
*/
|
|
- val = IVL_MAC | VTAG_EN | PORT_MEM(new_members) | VLAN_VALID;
|
|
+ val = IVL_MAC | VTAG_EN | PORT_MEM(new_members) | FID(FID_BRIDGED) |
|
|
+ VLAN_VALID;
|
|
mt7530_write(priv, MT7530_VAWD1, val);
|
|
|
|
/* Decide whether adding tag or not for those outgoing packets from the
|
|
@@ -1499,9 +1519,13 @@ mt7530_port_vlan_add(struct dsa_switch *
|
|
}
|
|
|
|
if (pvid) {
|
|
- mt7530_rmw(priv, MT7530_PPBV1_P(port), G0_PORT_VID_MASK,
|
|
- G0_PORT_VID(vlan->vid_end));
|
|
priv->ports[port].pvid = vlan->vid_end;
|
|
+
|
|
+ /* Only configure PVID if VLAN filtering is enabled */
|
|
+ if (dsa_port_is_vlan_filtering(dsa_to_port(ds, port)))
|
|
+ mt7530_rmw(priv, MT7530_PPBV1_P(port),
|
|
+ G0_PORT_VID_MASK,
|
|
+ G0_PORT_VID(vlan->vid_end));
|
|
}
|
|
|
|
mutex_unlock(&priv->reg_mutex);
|
|
@@ -1513,11 +1537,10 @@ mt7530_port_vlan_del(struct dsa_switch *
|
|
{
|
|
struct mt7530_hw_vlan_entry target_entry;
|
|
struct mt7530_priv *priv = ds->priv;
|
|
- u16 vid, pvid;
|
|
+ u16 vid;
|
|
|
|
mutex_lock(&priv->reg_mutex);
|
|
|
|
- pvid = priv->ports[port].pvid;
|
|
for (vid = vlan->vid_begin; vid <= vlan->vid_end; ++vid) {
|
|
mt7530_hw_vlan_entry_init(&target_entry, port, 0);
|
|
mt7530_hw_vlan_update(priv, vid, &target_entry,
|
|
@@ -1526,12 +1549,13 @@ mt7530_port_vlan_del(struct dsa_switch *
|
|
/* PVID is being restored to the default whenever the PVID port
|
|
* is being removed from the VLAN.
|
|
*/
|
|
- if (pvid == vid)
|
|
- pvid = G0_PORT_VID_DEF;
|
|
+ if (priv->ports[port].pvid == vid) {
|
|
+ priv->ports[port].pvid = G0_PORT_VID_DEF;
|
|
+ mt7530_rmw(priv, MT7530_PPBV1_P(port), G0_PORT_VID_MASK,
|
|
+ G0_PORT_VID_DEF);
|
|
+ }
|
|
}
|
|
|
|
- mt7530_rmw(priv, MT7530_PPBV1_P(port), G0_PORT_VID_MASK, pvid);
|
|
- priv->ports[port].pvid = pvid;
|
|
|
|
mutex_unlock(&priv->reg_mutex);
|
|
|
|
@@ -1827,6 +1851,10 @@ mt7530_setup(struct dsa_switch *ds)
|
|
return ret;
|
|
} else {
|
|
mt7530_port_disable(ds, i);
|
|
+
|
|
+ /* Set default PVID to 0 on all user ports */
|
|
+ mt7530_rmw(priv, MT7530_PPBV1_P(i), G0_PORT_VID_MASK,
|
|
+ G0_PORT_VID_DEF);
|
|
}
|
|
|
|
/* Enable consistent egress tag */
|
|
@@ -1993,6 +2021,10 @@ mt7531_setup(struct dsa_switch *ds)
|
|
return ret;
|
|
} else {
|
|
mt7530_port_disable(ds, i);
|
|
+
|
|
+ /* Set default PVID to 0 on all user ports */
|
|
+ mt7530_rmw(priv, MT7530_PPBV1_P(i), G0_PORT_VID_MASK,
|
|
+ G0_PORT_VID_DEF);
|
|
}
|
|
|
|
/* Enable consistent egress tag */
|
|
--- a/drivers/net/dsa/mt7530.h
|
|
+++ b/drivers/net/dsa/mt7530.h
|
|
@@ -145,11 +145,18 @@ enum mt7530_vlan_cmd {
|
|
#define VTAG_EN BIT(28)
|
|
/* VLAN Member Control */
|
|
#define PORT_MEM(x) (((x) & 0xff) << 16)
|
|
+/* Filter ID */
|
|
+#define FID(x) (((x) & 0x7) << 1)
|
|
/* VLAN Entry Valid */
|
|
#define VLAN_VALID BIT(0)
|
|
#define PORT_MEM_SHFT 16
|
|
#define PORT_MEM_MASK 0xff
|
|
|
|
+enum mt7530_fid {
|
|
+ FID_STANDALONE = 0,
|
|
+ FID_BRIDGED = 1,
|
|
+};
|
|
+
|
|
#define MT7530_VAWD2 0x98
|
|
/* Egress Tag Control */
|
|
#define ETAG_CTRL_P(p, x) (((x) & 0x3) << ((p) << 1))
|
|
@@ -244,7 +251,7 @@ enum mt7530_vlan_port_attr {
|
|
#define MT7530_PPBV1_P(x) (0x2014 + ((x) * 0x100))
|
|
#define G0_PORT_VID(x) (((x) & 0xfff) << 0)
|
|
#define G0_PORT_VID_MASK G0_PORT_VID(0xfff)
|
|
-#define G0_PORT_VID_DEF G0_PORT_VID(1)
|
|
+#define G0_PORT_VID_DEF G0_PORT_VID(0)
|
|
|
|
/* Register for port MAC control register */
|
|
#define MT7530_PMCR_P(x) (0x3000 + ((x) * 0x100))
|