openwrt/target/linux/ramips
Tee Hao Wei 97df795b78 ramips: add support for Linksys EA8100 v1
Specifications:
- SoC: MT7621AT
- RAM: 256MB
- Flash: 128MB NAND
- Ethernet: 5 Gigabit ports
- WiFi: 2.4G/5G MT7615N
- USB: 1 USB 3.0, 1 USB 2.0

This device is very similar to the EA7300 v1/v2 and EA7500 v2.

Installation:

Upload the generated factory image through the factory web interface.

(following part taken from EA7300 v2 commit message:)

This might fail due to the A/B nature of this device. When flashing, OEM
firmware writes over the non-booted partition. If booted from 'A',
flashing over 'B' won't work. To get around this, you should flash the
OEM image over itself. This will then boot the router from 'B' and
allow you to flash OpenWRT without problems.

Reverting to factory firmware:

Hard-reset the router three times to force it to boot from 'B.' This is
where the stock firmware resides. To remove any traces of OpenWRT from
your router simply flash the OEM image at this point.

With thanks to Leon Poon (@LeonPoon) for the initial bringup.

Signed-off-by: Tee Hao Wei <angelsl@in04.sg>
[add missing entry in 10_fix_wifi_mac]
Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
(cherry picked from commit b232680f84)
2021-06-10 17:09:35 +02:00
..
base-files/etc ramips: remove model name from LED labels 2020-10-02 14:51:57 +02:00
dts ramips: add support for Linksys EA8100 v1 2021-06-10 17:09:35 +02:00
files/drivers ramips: mt7530 swconfig: fix race condition in register access 2021-04-18 12:05:04 +02:00
image ramips: add support for Linksys EA8100 v1 2021-06-10 17:09:35 +02:00
mt76x8 ramips: add support for ELECOM WRC-1167FS 2021-02-11 16:37:53 +01:00
mt7620 ramips: fix mac addresses of Youku YK1 2021-05-14 23:32:22 +02:00
mt7621 ramips: add support for Linksys EA8100 v1 2021-06-10 17:09:35 +02:00
patches-5.4 kernel: bump 5.4 to 5.4.124 2021-06-06 17:54:51 +02:00
rt288x ramips: remove set_wifi_led function in 01_leds 2020-10-02 14:51:57 +02:00
rt305x ramips: add support for ZTE MF283+ 2021-06-02 21:29:16 +02:00
rt3883 ramips: remove generic profiles 2021-01-27 21:31:20 +01:00
Makefile target: use SPDX license identifiers on Makefiles 2021-02-10 15:47:18 +01:00
modules.mk ramips: rename mtk-hsdma to hsdma-mt7621 2021-03-15 10:32:53 -10:00