openwrt/target/linux/bcm27xx/patches-5.4/950-0405-dwc_otg-constrain-endpoint-max-packet-and-transfer-s.patch
Álvaro Fernández Rojas a1383655cf bcm27xx: add linux 5.4 support
Tested on bcm2710 (Raspberry Pi 3B).

Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
2020-02-29 12:50:51 +01:00

44 lines
1.7 KiB
Diff

From b7944a79716c115d881898e6a95705b262e7c1c9 Mon Sep 17 00:00:00 2001
From: Jonathan Bell <jonathan@raspberrypi.org>
Date: Tue, 7 Jan 2020 10:08:19 +0000
Subject: [PATCH] dwc_otg: constrain endpoint max packet and transfer
size on split IN
The hcd would unconditionally set the transfer length to the endpoint
packet size for non-isoc IN transfers. If the remaining buffer length
was less than the length of returned data, random memory would get
scribbled over, with bad effects if it crossed a page boundary.
Force a babble error if this happens by limiting the max transfer size
to the available buffer space. DMA will stop writing to memory on a
babble condition.
The hardware expects xfersize to be an integer multiple of maxpacket
size, so override hcchar.b.mps as well.
Signed-off-by: Jonathan Bell <jonathan@raspberrypi.org>
---
drivers/usb/host/dwc_otg/dwc_otg_hcd.c | 4 ++--
1 file changed, 2 insertions(+), 2 deletions(-)
--- a/drivers/usb/host/dwc_otg/dwc_otg_hcd.c
+++ b/drivers/usb/host/dwc_otg/dwc_otg_hcd.c
@@ -1813,7 +1813,7 @@ int fiq_fsm_queue_split_transaction(dwc_
st->nr_errors = 0;
st->hcchar_copy.d32 = 0;
- st->hcchar_copy.b.mps = hc->max_packet;
+ st->hcchar_copy.b.mps = min_t(uint32_t, hc->xfer_len, hc->max_packet);
st->hcchar_copy.b.epdir = hc->ep_is_in;
st->hcchar_copy.b.devaddr = hc->dev_addr;
st->hcchar_copy.b.epnum = hc->ep_num;
@@ -1858,7 +1858,7 @@ int fiq_fsm_queue_split_transaction(dwc_
st->hctsiz_copy.b.pid = hc->data_pid_start;
if (hc->ep_is_in || (hc->xfer_len > hc->max_packet)) {
- hc->xfer_len = hc->max_packet;
+ hc->xfer_len = min_t(uint32_t, hc->xfer_len, hc->max_packet);
} else if (!hc->ep_is_in && (hc->xfer_len > 188)) {
hc->xfer_len = 188;
}