openwrt/target/linux/ramips/dts/mt7621_telco-electronics_x1.dts
Ansuel Smith 06bb4a5018 ramips: convert mtd-mac-address to nvmem implementation
Define nvmem-cells and convert mtd-mac-address to nvmem implementation.
The conversion is done with an automated script.

Signed-off-by: Ansuel Smith <ansuelsmth@gmail.com>
2021-07-19 14:51:22 +02:00

201 lines
3.2 KiB
Plaintext

// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
#include "mt7621.dtsi"
#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/input/input.h>
/ {
compatible = "telco-electronics,x1", "mediatek,mt7621-soc";
model = "Telco Electronics X1";
aliases {
led-boot = &system_led;
led-failsafe = &system_led;
led-running = &system_led;
led-upgrade = &system_led;
};
chosen {
bootargs = "console=ttyS0,115200";
};
keys {
compatible = "gpio-keys";
reset {
label = "reset";
gpios = <&gpio 18 GPIO_ACTIVE_LOW>;
linux,code = <KEY_RESTART>;
};
};
leds {
compatible = "gpio-leds";
system_led: system {
label = "green:system";
gpios = <&gpio 26 GPIO_ACTIVE_LOW>;
};
modem_offline {
label = "red:modem-offline";
gpios = <&gpio 23 GPIO_ACTIVE_HIGH>;
};
modem_4g {
label = "blue:modem-4g";
gpios = <&gpio 24 GPIO_ACTIVE_LOW>;
};
modem_3g {
label = "green:modem-3g";
gpios = <&gpio 25 GPIO_ACTIVE_LOW>;
};
modem_rssi_lowest {
label = "green:modem-rssi-lowest";
gpios = <&gpio 27 GPIO_ACTIVE_LOW>;
};
modem_rssi_low {
label = "green:modem-rssi-low";
gpios = <&gpio 28 GPIO_ACTIVE_LOW>;
};
modem_rssi_medium {
label = "green:modem-rssi-medium";
gpios = <&gpio 29 GPIO_ACTIVE_LOW>;
};
modem_rssi_high {
label = "green:modem-rssi-high";
gpios = <&gpio 30 GPIO_ACTIVE_LOW>;
};
modem_rssi_highest {
label = "green:modem-rssi-highest";
gpios = <&gpio 31 GPIO_ACTIVE_LOW>;
};
};
};
&spi0 {
status = "okay";
flash@0 {
compatible = "jedec,spi-nor";
reg = <0>;
spi-max-frequency = <14000000>;
partitions {
compatible = "fixed-partitions";
#address-cells = <1>;
#size-cells = <1>;
partition@0 {
label = "bootloader";
reg = <0x0 0x30000>;
read-only;
};
partition@30000 {
label = "config";
reg = <0x30000 0x10000>;
read-only;
};
factory: partition@40000 {
label = "factory";
reg = <0x40000 0x10000>;
read-only;
};
firmware: partition@50000 {
compatible = "denx,uimage";
label = "firmware";
reg = <0x50000 0xfb0000>;
};
};
};
};
&gmac0 {
nvmem-cells = <&macaddr_factory_e006>;
nvmem-cell-names = "mac-address";
};
&switch0 {
ports {
port@0 {
status = "okay";
label = "lan1";
};
port@1 {
status = "okay";
label = "lan2";
};
port@2 {
status = "okay";
label = "lan3";
};
port@3 {
status = "okay";
label = "lan4";
};
port@4 {
status = "okay";
label = "wan";
nvmem-cells = <&macaddr_factory_e006>;
nvmem-cell-names = "mac-address";
mac-address-increment = <1>;
};
};
};
&state_default {
gpio {
groups = "wdt", "rgmii2";
function = "gpio";
};
};
&pcie {
status = "okay";
pcie0 {
wifi@0,0 {
compatible = "pci14c3,7603";
reg = <0x0000 0 0 0 0>;
mediatek,mtd-eeprom = <&factory 0x0000>;
ieee80211-freq-limit = <2400000 2500000>;
};
};
pcie1 {
wifi@0,0 {
compatible = "pci14c3,7662";
reg = <0x0000 0 0 0 0>;
mediatek,mtd-eeprom = <&factory 0x8000>;
ieee80211-freq-limit = <5000000 6000000>;
led {
led-sources = <2>;
};
};
};
};
&factory {
compatible = "nvmem-cells";
#address-cells = <1>;
#size-cells = <1>;
macaddr_factory_e006: macaddr@e006 {
reg = <0xe006 0x6>;
};
};