mirror of
https://github.com/openwrt/openwrt.git
synced 2024-12-28 17:48:58 +00:00
f5919b65d4
Patch generation process: - rebase rpi/rpi-4.14.y on v4.14.89 from linux-stable - git format-patch v4.14.89 Patches skipped during rebase: - lan78xx: Read MAC address from DT if present - lan78xx: Enable LEDs and auto-negotiation - Revert "softirq: Let ksoftirqd do its job" - sc16is7xx: Fix for multi-channel stall - lan78xx: Ignore DT MAC address if already valid - lan78xx: Simple patch to prevent some crashes - tcp_write_queue_purge clears all the SKBs in the write queue - Revert "lan78xx: Simple patch to prevent some crashes" - lan78xx: Connect phy early - Arm: mm: ftrace: Only set text back to ro after kernel has been marked ro - Revert "Revert "softirq: Let ksoftirqd do its job"" - ASoC: cs4265: SOC_SINGLE register value error fix - Revert "ASoC: cs4265: SOC_SINGLE register value error fix" - Revert "net: pskb_trim_rcsum() and CHECKSUM_COMPLETE are friends" - Revert "Revert "net: pskb_trim_rcsum() and CHECKSUM_COMPLETE are friends"" Patches dropped after rebase: - net: Add non-mainline source for rtl8192cu wlan - net: Fix rtl8192cu build errors on other platforms - brcm: adds support for BCM43341 wifi - brcmfmac: Mute expected startup 'errors' - ARM64: Fix build break for RTL8187/RTL8192CU wifi - ARM64: Enable RTL8187/RTL8192CU wifi in build config - This is the driver for Sony CXD2880 DVB-T2/T tuner + demodulator - brcmfmac: add CLM download support - brcmfmac: request_firmware_direct is quieter - Sets the BCDC priority to constant 0 - brcmfmac: Disable ARP offloading when promiscuous - brcmfmac: Avoid possible out-of-bounds read - brcmfmac: Delete redundant length check - net: rtl8192cu: Normalize indentation - net: rtl8192cu: Fix implicit fallthrough warnings - Revert "Sets the BCDC priority to constant 0" - media: cxd2880: Bump to match 4.18.y version - media: cxd2880-spi: Bump to match 4.18.y version - Revert "mm: alloc_contig: re-allow CMA to compact FS pages" - Revert "Revert "mm: alloc_contig: re-allow CMA to compact FS pages"" - cxd2880: CXD2880_SPI_DRV should select DVB_CXD2880 with MEDIA_SUBDRV_AUTOSELECT - 950-0421-HID-hid-bigbenff-driver-for-BigBen-Interactive-PS3OF.patch - 950-0453-Add-hid-bigbenff-to-list-of-have_special_driver-for-.patch Make I2C built-in instead of modular as in upstream defconfig; also the easiest way to get MFD_ARIZONA enabled, which is required by kmod-sound-soc-rpi-cirrus. Add missing compatible strings from 4.9/960-add-rasbperrypi-compatible.patch, using upstream names for compute modules. Add extra patch to enable the LEDs on lan78xx. Compile-tested: bcm2708, bcm2709, bcm2710 (with CONFIG_ALL_KMODS=y) Runtime-tested: bcm2708, bcm2710 Signed-off-by: Stijn Tintel <stijn@linux-ipv6.be>
135 lines
4.1 KiB
Diff
135 lines
4.1 KiB
Diff
From c325695bc45f687cb2b206d02c8d8e7f3c1ad0a1 Mon Sep 17 00:00:00 2001
|
|
From: Dave Stevenson <dave.stevenson@raspberrypi.org>
|
|
Date: Thu, 23 Aug 2018 10:42:41 +0100
|
|
Subject: [PATCH 409/454] dtoverlays: Add support for ADV7280-M, ADV7281-M and
|
|
ADV7281-MA chips.
|
|
|
|
The driver that supports the ADV7282-M also supports the ADV7280-M,
|
|
ADV7281-M, and ADV7281-MA.
|
|
The 7280-M exposes 8 analogue inputs. The 7281-M doesn't have the
|
|
I2P deinterlacing block. The 7281-MA has 8 inputs but no I2P.
|
|
Otherwise they are the same as ADV7282-M.
|
|
|
|
Adds a new overlay "adv728x" that includes the existing adv7282
|
|
overlay but adds several parameters to modify the behaviour.
|
|
|
|
Adds a new addr parameter to allow the I2C address to be changed.
|
|
(the chip has an address select pin to change between 0x20 and 0x21).
|
|
|
|
Signed-off-by: Dave Stevenson <dave.stevenson@raspberrypi.org>
|
|
---
|
|
arch/arm/boot/dts/overlays/Makefile | 1 +
|
|
arch/arm/boot/dts/overlays/README | 13 +++++++
|
|
.../boot/dts/overlays/adv7282m-overlay.dts | 9 ++---
|
|
.../boot/dts/overlays/adv728x-m-overlay.dts | 36 +++++++++++++++++++
|
|
4 files changed, 55 insertions(+), 4 deletions(-)
|
|
create mode 100644 arch/arm/boot/dts/overlays/adv728x-m-overlay.dts
|
|
|
|
--- a/arch/arm/boot/dts/overlays/Makefile
|
|
+++ b/arch/arm/boot/dts/overlays/Makefile
|
|
@@ -7,6 +7,7 @@ dtbo-$(CONFIG_ARCH_BCM2835) += \
|
|
ads1115.dtbo \
|
|
ads7846.dtbo \
|
|
adv7282m.dtbo \
|
|
+ adv728x-m.dtbo \
|
|
akkordion-iqdacplus.dtbo \
|
|
allo-boss-dac-pcm512x-audio.dtbo \
|
|
allo-digione.dtbo \
|
|
--- a/arch/arm/boot/dts/overlays/README
|
|
+++ b/arch/arm/boot/dts/overlays/README
|
|
@@ -274,6 +274,19 @@ Info: Analog Devices ADV7282M analogue
|
|
Load: dtoverlay=adv7282m,<param>=<val>
|
|
Params: i2c_pins_28_29 Use pins 28&29 for the I2C instead of 44&45.
|
|
This is required for Pi B+, 2, 0, and 0W.
|
|
+ addr Overrides the I2C address (default 0x21)
|
|
+
|
|
+
|
|
+Name: adv728x-m
|
|
+Info: Analog Devices ADV728[0|1|2]-M analogue video to CSI2 bridges.
|
|
+ This is a wrapper for adv7282m, and defaults to ADV7282M.
|
|
+Load: dtoverlay=adv728x-m,<param>=<val>
|
|
+Params: i2c_pins_28_29 Use pins 28&29 for the I2C instead of 44&45.
|
|
+ This is required for Pi B+, 2, 0, and 0W.
|
|
+ addr Overrides the I2C address (default 0x21)
|
|
+ adv7280m Select ADV7280-M.
|
|
+ adv7281m Select ADV7281-M.
|
|
+ adv7281ma Select ADV7281-MA.
|
|
|
|
|
|
Name: akkordion-iqdacplus
|
|
--- a/arch/arm/boot/dts/overlays/adv7282m-overlay.dts
|
|
+++ b/arch/arm/boot/dts/overlays/adv7282m-overlay.dts
|
|
@@ -12,13 +12,13 @@
|
|
#size-cells = <0>;
|
|
status = "okay";
|
|
|
|
- adv7282: adv7282@21 {
|
|
+ adv728x: adv728x@21 {
|
|
compatible = "adi,adv7282-m";
|
|
reg = <0x21>;
|
|
status = "okay";
|
|
clock-frequency = <24000000>;
|
|
port {
|
|
- adv7282_0: endpoint {
|
|
+ adv728x_0: endpoint {
|
|
remote-endpoint = <&csi1_ep>;
|
|
clock-lanes = <0>;
|
|
data-lanes = <1>;
|
|
@@ -42,7 +42,7 @@
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
csi1_ep: endpoint {
|
|
- remote-endpoint = <&adv7282_0>;
|
|
+ remote-endpoint = <&adv728x_0>;
|
|
};
|
|
};
|
|
};
|
|
@@ -70,6 +70,7 @@
|
|
};
|
|
|
|
__overrides__ {
|
|
- i2c_pins_28_29 = <0>,"+2-3";
|
|
+ i2c_pins_28_29 = <0>,"+2-3";
|
|
+ addr = <&adv728x>,"reg:0";
|
|
};
|
|
};
|
|
--- /dev/null
|
|
+++ b/arch/arm/boot/dts/overlays/adv728x-m-overlay.dts
|
|
@@ -0,0 +1,36 @@
|
|
+// Definitions for Analog Devices ADV728[0|1|2]-M video to CSI2 bridges on VC
|
|
+// I2C bus
|
|
+
|
|
+#include "adv7282m-overlay.dts"
|
|
+
|
|
+/{
|
|
+ compatible = "brcm,bcm2708";
|
|
+
|
|
+ // Fragment numbers deliberately high to avoid conflicts with the
|
|
+ // included adv7282m overlay file.
|
|
+
|
|
+ fragment@101 {
|
|
+ target = <&adv728x>;
|
|
+ __dormant__ {
|
|
+ compatible = "adi,adv7280-m";
|
|
+ };
|
|
+ };
|
|
+ fragment@102 {
|
|
+ target = <&adv728x>;
|
|
+ __dormant__ {
|
|
+ compatible = "adi,adv7281-m";
|
|
+ };
|
|
+ };
|
|
+ fragment@103 {
|
|
+ target = <&adv728x>;
|
|
+ __dormant__ {
|
|
+ compatible = "adi,adv7281-ma";
|
|
+ };
|
|
+ };
|
|
+
|
|
+ __overrides__ {
|
|
+ adv7280m = <0>, "+101";
|
|
+ adv7281m = <0>, "+102";
|
|
+ adv7281ma = <0>, "+103";
|
|
+ };
|
|
+};
|