mirror of
https://github.com/openwrt/openwrt.git
synced 2024-12-28 17:48:58 +00:00
f5919b65d4
Patch generation process: - rebase rpi/rpi-4.14.y on v4.14.89 from linux-stable - git format-patch v4.14.89 Patches skipped during rebase: - lan78xx: Read MAC address from DT if present - lan78xx: Enable LEDs and auto-negotiation - Revert "softirq: Let ksoftirqd do its job" - sc16is7xx: Fix for multi-channel stall - lan78xx: Ignore DT MAC address if already valid - lan78xx: Simple patch to prevent some crashes - tcp_write_queue_purge clears all the SKBs in the write queue - Revert "lan78xx: Simple patch to prevent some crashes" - lan78xx: Connect phy early - Arm: mm: ftrace: Only set text back to ro after kernel has been marked ro - Revert "Revert "softirq: Let ksoftirqd do its job"" - ASoC: cs4265: SOC_SINGLE register value error fix - Revert "ASoC: cs4265: SOC_SINGLE register value error fix" - Revert "net: pskb_trim_rcsum() and CHECKSUM_COMPLETE are friends" - Revert "Revert "net: pskb_trim_rcsum() and CHECKSUM_COMPLETE are friends"" Patches dropped after rebase: - net: Add non-mainline source for rtl8192cu wlan - net: Fix rtl8192cu build errors on other platforms - brcm: adds support for BCM43341 wifi - brcmfmac: Mute expected startup 'errors' - ARM64: Fix build break for RTL8187/RTL8192CU wifi - ARM64: Enable RTL8187/RTL8192CU wifi in build config - This is the driver for Sony CXD2880 DVB-T2/T tuner + demodulator - brcmfmac: add CLM download support - brcmfmac: request_firmware_direct is quieter - Sets the BCDC priority to constant 0 - brcmfmac: Disable ARP offloading when promiscuous - brcmfmac: Avoid possible out-of-bounds read - brcmfmac: Delete redundant length check - net: rtl8192cu: Normalize indentation - net: rtl8192cu: Fix implicit fallthrough warnings - Revert "Sets the BCDC priority to constant 0" - media: cxd2880: Bump to match 4.18.y version - media: cxd2880-spi: Bump to match 4.18.y version - Revert "mm: alloc_contig: re-allow CMA to compact FS pages" - Revert "Revert "mm: alloc_contig: re-allow CMA to compact FS pages"" - cxd2880: CXD2880_SPI_DRV should select DVB_CXD2880 with MEDIA_SUBDRV_AUTOSELECT - 950-0421-HID-hid-bigbenff-driver-for-BigBen-Interactive-PS3OF.patch - 950-0453-Add-hid-bigbenff-to-list-of-have_special_driver-for-.patch Make I2C built-in instead of modular as in upstream defconfig; also the easiest way to get MFD_ARIZONA enabled, which is required by kmod-sound-soc-rpi-cirrus. Add missing compatible strings from 4.9/960-add-rasbperrypi-compatible.patch, using upstream names for compute modules. Add extra patch to enable the LEDs on lan78xx. Compile-tested: bcm2708, bcm2709, bcm2710 (with CONFIG_ALL_KMODS=y) Runtime-tested: bcm2708, bcm2710 Signed-off-by: Stijn Tintel <stijn@linux-ipv6.be>
43 lines
1.6 KiB
Diff
43 lines
1.6 KiB
Diff
From 68ad84eea4f5a100756faf1c393b16fbd1468b55 Mon Sep 17 00:00:00 2001
|
|
From: Aaron Shaw <shawaj@gmail.com>
|
|
Date: Thu, 28 Dec 2017 17:31:52 +0000
|
|
Subject: [PATCH 144/454] add backlight control to rpi-display overlay
|
|
|
|
---
|
|
arch/arm/boot/dts/overlays/README | 1 +
|
|
arch/arm/boot/dts/overlays/rpi-display-overlay.dts | 14 ++++++++------
|
|
2 files changed, 9 insertions(+), 6 deletions(-)
|
|
|
|
--- a/arch/arm/boot/dts/overlays/README
|
|
+++ b/arch/arm/boot/dts/overlays/README
|
|
@@ -1329,6 +1329,7 @@ Params: speed Display
|
|
debug Debug output level {0-7}
|
|
xohms Touchpanel sensitivity (X-plate resistance)
|
|
swapxy Swap x and y axis
|
|
+ backlight Change backlight GPIO pin {e.g. 12, 18}
|
|
|
|
|
|
Name: rpi-ft5406
|
|
--- a/arch/arm/boot/dts/overlays/rpi-display-overlay.dts
|
|
+++ b/arch/arm/boot/dts/overlays/rpi-display-overlay.dts
|
|
@@ -79,11 +79,13 @@
|
|
};
|
|
};
|
|
__overrides__ {
|
|
- speed = <&rpidisplay>,"spi-max-frequency:0";
|
|
- rotate = <&rpidisplay>,"rotate:0";
|
|
- fps = <&rpidisplay>,"fps:0";
|
|
- debug = <&rpidisplay>,"debug:0";
|
|
- xohms = <&rpidisplay_ts>,"ti,x-plate-ohms;0";
|
|
- swapxy = <&rpidisplay_ts>,"ti,swap-xy?";
|
|
+ speed = <&rpidisplay>,"spi-max-frequency:0";
|
|
+ rotate = <&rpidisplay>,"rotate:0";
|
|
+ fps = <&rpidisplay>,"fps:0";
|
|
+ debug = <&rpidisplay>,"debug:0";
|
|
+ xohms = <&rpidisplay_ts>,"ti,x-plate-ohms;0";
|
|
+ swapxy = <&rpidisplay_ts>,"ti,swap-xy?";
|
|
+ backlight = <&rpidisplay>,"led-gpios:4",
|
|
+ <&rpi_display_pins>,"brcm,pins:0";
|
|
};
|
|
};
|