openwrt/target/linux/ath79
John Marrett 252466a0ce ath79: add support for GL.iNet GL-X300B
The GL-X300B is a industrial 4G LTE router based on the Qualcomm
QCA9531 SoC.

Specifications:
 - Qualcomm QCA9531 @ 650 MHz
 - 128 MB of RAM
 - 16 MB of SPI NOR FLASH
 - 2x 10/100 Mbps Ethernet
 - 2.4GHz 802.11b/g/n
 - 1x USB 2.0 (vbus driven by GPIO)
 - 4x LED, driven by GPIO
 - 1x button (reset)
 - 1x mini pci-e slot (vcc driven by GPIO)
 - RS-485 Serial Port (untested)

Flash instructions:

This firmware can be flashed using either sysupgrade from the GL.iNet
firmware or the recovery console as follows:

 - Press and hold the reset button
 - Connect power to the router, wait five seconds
 - Manually configure 192.168.1.2/24 on your computer, connect to
   192.168.1.1
 - Upload the firmware image using the web interface

RS-485 serial port is untested and may depend on the following commit in
the GL.iNet repo:

202e83a32a

MAC addresses as verified by OEM firmware:

vendor   OpenWrt   address
WAN      eth0      label
LAN      eth1      label + 1
2g       phy0      label + 2

The label MAC address was found in the art partition at 0x0

Based on vendor commit:

16c5708b20

Signed-off-by: John Marrett <johnf@zioncluster.ca>
2021-08-05 01:48:17 +02:00
..
base-files/etc/hotplug.d/ieee80211 ath79: add WiFi migration for AR913x 2020-09-28 16:23:03 +02:00
dts ath79: add support for GL.iNet GL-X300B 2021-08-05 01:48:17 +02:00
files treewide: backport support for nvmem on non platform devices 2021-08-05 01:46:26 +02:00
generic ath79: add support for GL.iNet GL-X300B 2021-08-05 01:48:17 +02:00
image ath79: add support for GL.iNet GL-X300B 2021-08-05 01:48:17 +02:00
mikrotik ath79: add support for MikroTik RouterBOARD 912UAG-2HPnD 2021-06-21 10:48:27 +02:00
nand treewide: remove "+" sign for increment with macaddr_add 2021-06-05 23:54:37 +02:00
patches-5.4 kernel: bump 5.4 to 5.4.135 2021-07-31 19:13:00 +02:00
patches-5.10 kernel: bump 5.10 to 5.10.53 2021-07-29 19:50:15 +01:00
tiny ath79: consolidate testing kernel 2021-04-10 19:28:04 +02:00
config-5.4 ath79: add missing MTD_NAND_RB91X symbol 2021-07-09 17:11:12 +02:00
config-5.10 ath79: add missing GPIO_LATCH symbol 2021-06-22 00:39:48 +02:00
Makefile ath79: consolidate testing kernel 2021-04-10 19:28:04 +02:00
modules.mk