openwrt/target/linux/generic/pending-5.15/920-mangle_bootargs.patch
Petr Štetiar ca5c695a45 kernel: bump 5.15 to 5.15.62
Deleted following upstreamed patches:

 bcm27xx: 950-0006-drm-vc4-hdmi-Fix-HPD-GPIO-detection.patch
 bcm27xx: 950-0420-drm-vc4-Adopt-the-dma-configuration-from-the-HVS-or-.patch
 bcm27xx: 950-0425-drm-vc4-A-present-but-empty-dmas-disables-audio.patch
 bcm27xx: 950-0432-vc4-drm-Avoid-full-hdmi-audio-fifo-writes.patch
 bcm27xx: 950-0433-vc4-drm-vc4_plane-Remove-subpixel-positioning-check.patch
 bcm27xx: 950-0435-drm-vc4-Correct-pixel-order-for-DSI0.patch
 bcm27xx: 950-0436-drm-vc4-Register-dsi0-as-the-correct-vc4-encoder-typ.patch
 bcm27xx: 950-0437-drm-vc4-Fix-dsi0-interrupt-support.patch
 bcm27xx: 950-0438-drm-vc4-Add-correct-stop-condition-to-vc4_dsi_encode.patch
 bcm27xx: 950-0443-drm-vc4-Fix-timings-for-interlaced-modes.patch
 bcm27xx: 950-0445-drm-vc4-Fix-margin-calculations-for-the-right-bottom.patch
 bcm27xx: 950-0475-drm-vc4-Reset-HDMI-MISC_CONTROL-register.patch
 bcm27xx: 950-0476-drm-vc4-Release-workaround-buffer-and-DMA-in-error-p.patch
 bcm27xx: 950-0477-drm-vc4-Correct-DSI-divider-calculations.patch
 bcm27xx: 950-0664-drm-vc4-dsi-Correct-max-divider-to-255-not-7.patch

 bcm53xx: 072-next-ARM_dts_BCM53015-add-mr26.patch

 mediatek: 920-linux-next-dts-mt7622-bpi-r64-fix-wps-button.patch

Manually rebased following patches:

 bcm27xx: 950-0004-drm-vc4-hdmi-Remove-the-DDC-probing-for-status-detec.patch
 bcm27xx: 950-0700-net-phy-lan87xx-Decrease-phy-polling-rate.patch
 bcm27xx: 950-0711-drm-vc4-Rename-bridge-to-out_bridge.patch
 bcm27xx: 950-0713-drm-vc4-Remove-splitting-the-bridge-chain-from-the-d.patch
 bcm27xx: 950-0715-drm-vc4-Convert-vc4_dsi-to-using-a-bridge-instead-of.patch
 bcm27xx: 950-0787-vc4-drm-vc4_plane-Keep-fractional-source-coords-insi.patch
 bcm27xx: 950-0914-mmc-block-Don-t-do-single-sector-reads-during-recove.patch

Runtime tested on turris-omnia and glinet-b1300.

Tested-by: John Audia <therealgraysky@proton.me> [bcm2711/RPi4B, mt7622/RT3200]
Signed-off-by: Petr Štetiar <ynezz@true.cz>
2022-08-23 10:37:04 +02:00

72 lines
1.9 KiB
Diff

From: Imre Kaloz <kaloz@openwrt.org>
Subject: init: add CONFIG_MANGLE_BOOTARGS and disable it by default
Enabling this option renames the bootloader supplied root=
and rootfstype= variables, which might have to be know but
would break the automatisms OpenWrt uses.
Signed-off-by: Imre Kaloz <kaloz@openwrt.org>
---
init/Kconfig | 9 +++++++++
init/main.c | 24 ++++++++++++++++++++++++
2 files changed, 33 insertions(+)
--- a/init/Kconfig
+++ b/init/Kconfig
@@ -1810,6 +1810,15 @@ config EMBEDDED
an embedded system so certain expert options are available
for configuration.
+config MANGLE_BOOTARGS
+ bool "Rename offending bootargs"
+ depends on EXPERT
+ help
+ Sometimes the bootloader passed bogus root= and rootfstype=
+ parameters to the kernel, and while you want to ignore them,
+ you need to know the values f.e. to support dual firmware
+ layouts on the flash.
+
config HAVE_PERF_EVENTS
bool
help
--- a/init/main.c
+++ b/init/main.c
@@ -616,6 +616,29 @@ static inline void setup_nr_cpu_ids(void
static inline void smp_prepare_cpus(unsigned int maxcpus) { }
#endif
+#ifdef CONFIG_MANGLE_BOOTARGS
+static void __init mangle_bootargs(char *command_line)
+{
+ char *rootdev;
+ char *rootfs;
+
+ rootdev = strstr(command_line, "root=/dev/mtdblock");
+
+ if (rootdev)
+ strncpy(rootdev, "mangled_rootblock=", 18);
+
+ rootfs = strstr(command_line, "rootfstype");
+
+ if (rootfs)
+ strncpy(rootfs, "mangled_fs", 10);
+
+}
+#else
+static void __init mangle_bootargs(char *command_line)
+{
+}
+#endif
+
/*
* We need to store the untouched command line for future reference.
* We also need to store the touched command line since the parameter
@@ -956,6 +979,7 @@ asmlinkage __visible void __init __no_sa
pr_notice("%s", linux_banner);
early_security_init();
setup_arch(&command_line);
+ mangle_bootargs(command_line);
setup_boot_config();
setup_command_line(command_line);
setup_nr_cpu_ids();