openwrt/target/linux/ramips
Sungbo Eo 2678ba9093 ramips: add support for ipTIME A604M
ipTIME A604M is a 2.4/5GHz band AC1200 router, based on MediaTek
MT7628AN.

Specifications:
- SoC: MT7628AN
- RAM: DDR2 64MB
- Flash: SPI NOR 8MB
- WiFi:
  - 2.4GHz: SoC internal
  - 5GHz: MT7612EN
- Ethernet: 5x 10/100Mbps
  - Switch: SoC internal
- UART:
  - J1: 3.3V, TX, RX, GND (3.3V is the square pad) / 57600 8N1

Installation via web interface:
1.  Flash **initramfs** image through the stock web interface.
2.  Boot into OpenWrt and perform sysupgrade with sysupgrade image.

Revert to stock firmware:
1.  Perform sysupgrade with stock image.

Signed-off-by: Sungbo Eo <mans0n@gorani.run>
2019-08-17 23:52:34 +08:00
..
base-files ramips: add support for ipTIME A604M 2019-08-17 23:52:34 +08:00
dts ramips: add support for ipTIME A604M 2019-08-17 23:52:34 +08:00
files-4.14/drivers ramips: mtk-mmc: mt76x8: check ESD_MODE before applying AGPIO_CFG 2019-07-16 09:50:16 +08:00
image ramips: add support for ipTIME A604M 2019-08-17 23:52:34 +08:00
mt76x8 ramips: add support for ipTIME A604M 2019-08-17 23:52:34 +08:00
mt7620 ramips: use upstream RAW_APPENDED_DTB instead of our OWRTDTB 2019-07-08 22:00:24 +02:00
mt7621 Revert faulty tree push 2019-08-12 12:27:06 +02:00
patches-4.14 ramips: mt7621: add support for memory detection 2019-07-11 22:11:21 +08:00
rt288x ramips: disable CONFIG_MTD_SPLIT_FIRMWARE 2019-01-26 21:46:33 +01:00
rt305x ramips: use upstream RAW_APPENDED_DTB instead of our OWRTDTB 2019-07-08 22:00:24 +02:00
rt3883 ramips: use upstream RAW_APPENDED_DTB instead of our OWRTDTB 2019-07-08 22:00:24 +02:00
Makefile ramips: switch to linux 4.14 2018-04-06 18:07:43 +02:00
modules.mk kernel: Fix kmod-regmap split 2019-01-27 11:07:14 +01:00