openwrt/target/linux/ramips/dts/mt7621_buffalo_wsr-1166dhp.dts
Sungbo Eo 1eceab3fc0 ramips: dts: use generic node name for flash
In DTS Checklist[1] we're now demanding proper generic node names, as
the name of a node should reflect the function of the device and use
generic name for that[2]. Everybody seems to be copy&pasting from DTS
files available in the repository today, so let's unify that naming
there as well and provide proper examples.

While at it, remove unused m25p80 label.

Tested on rt5350 (for spi-nor) and rt3662 (for cfi-flash).

1. https://openwrt.org/submitting-patches#dts_checklist
2. https://github.com/devicetree-org/devicetree-specification/blob/master/source/devicetree-basics.rst#generic-names-recommendation

Signed-off-by: Sungbo Eo <mans0n@gorani.run>
2020-05-09 14:48:50 +02:00

219 lines
3.4 KiB
Plaintext

/dts-v1/;
#include "mt7621.dtsi"
#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/input/input.h>
/ {
compatible = "buffalo,wsr-1166dhp", "mediatek,mt7621-soc";
model = "Buffalo WSR-1166DHP";
aliases {
led-boot = &led_power;
led-failsafe = &led_power;
led-running = &led_power;
led-upgrade = &led_power;
};
chosen {
bootargs = "console=ttyS0,57600";
};
leds {
compatible = "gpio-leds";
internet_g {
label = "wsr-1166:green:internet";
gpios = <&gpio 41 GPIO_ACTIVE_LOW>;
};
router_g {
label = "wsr-1166:green:router";
gpios = <&gpio 42 GPIO_ACTIVE_LOW>;
};
router_o {
label = "wsr-1166:orange:router";
gpios = <&gpio 43 GPIO_ACTIVE_LOW>;
};
internet_o {
label = "wsr-1166:orange:internet";
gpios = <&gpio 44 GPIO_ACTIVE_LOW>;
};
wifi_o {
label = "wsr-1166:orange:wifi";
gpios = <&gpio 45 GPIO_ACTIVE_LOW>;
};
led_power: power {
label = "wsr-1166:green:power";
gpios = <&gpio 46 GPIO_ACTIVE_LOW>;
};
diag {
label = "wsr-1166:orange:diag";
gpios = <&gpio 47 GPIO_ACTIVE_LOW>;
};
wifi_g {
label = "wsr-1166:green:wifi";
gpios = <&gpio 48 GPIO_ACTIVE_LOW>;
};
};
keys {
compatible = "gpio-keys";
power {
label = "power";
gpios = <&gpio 18 GPIO_ACTIVE_LOW>;
linux,code = <KEY_POWER>;
};
reset {
label = "reset";
gpios = <&gpio 3 GPIO_ACTIVE_LOW>;
linux,code = <KEY_RESTART>;
};
aoss {
label = "aoss";
gpios = <&gpio 6 GPIO_ACTIVE_LOW>;
linux,code = <KEY_WPS_BUTTON>;
};
auto {
label = "mode";
gpios = <&gpio 7 GPIO_ACTIVE_HIGH>;
linux,code = <BTN_0>;
linux,input-type = <EV_SW>;
};
ap {
label = "ap";
gpios = <&gpio 10 GPIO_ACTIVE_HIGH>;
linux,code = <BTN_0>;
linux,input-type = <EV_SW>;
};
router {
label = "router";
gpios = <&gpio 12 GPIO_ACTIVE_HIGH>;
linux,code = <BTN_0>;
linux,input-type = <EV_SW>;
};
};
gpio_poweroff {
compatible = "gpio-poweroff";
gpios = <&gpio 0 GPIO_ACTIVE_LOW>;
};
};
&spi0 {
status = "okay";
flash@0 {
compatible = "jedec,spi-nor";
reg = <0>;
spi-max-frequency = <10000000>;
partitions {
compatible = "fixed-partitions";
#address-cells = <1>;
#size-cells = <1>;
partition@0 {
label = "u-boot";
reg = <0x0 0x30000>;
read-only;
};
partition@30000 {
label = "u-boot-env";
reg = <0x30000 0x10000>;
read-only;
};
factory: partition@40000 {
label = "factory";
reg = <0x40000 0x10000>;
read-only;
};
partition@50000 {
compatible = "openwrt,trx";
label = "firmware";
reg = <0x50000 0xf90000>;
};
partition@fe0000 {
label = "board_data";
reg = <0xfe0000 0x20000>;
};
};
};
};
&switch0 {
ports {
port@0 {
status = "okay";
label = "lan1";
};
port@1 {
status = "okay";
label = "lan2";
};
port@2 {
status = "okay";
label = "lan3";
};
port@3 {
status = "okay";
label = "lan4";
};
port@4 {
status = "okay";
label = "wan";
};
};
};
&state_default {
gpio {
groups = "i2c", "uart2", "uart3", "rgmii2", "sdhci";
function = "gpio";
};
};
&pcie {
status = "okay";
};
&pcie0 {
mt76@0,0 {
reg = <0x0000 0 0 0 0>;
mediatek,mtd-eeprom = <&factory 0x8000>;
ieee80211-freq-limit = <5000000 6000000>;
};
};
&pcie1 {
mt76@0,0 {
reg = <0x0000 0 0 0 0>;
mediatek,mtd-eeprom = <&factory 0x0000>;
};
};
&xhci {
status = "disabled";
};