openwrt/package/base-files/files/bin/config_generate
Felix Fietkau 956794c2e9 base-files: change type of adsl and vdsl to dsl only
Instead of having two different types adsl and vdsl just create one dsl
type. This way we can use the same luci code for adsl and vdsl and the
config parameters are not so different.

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>

SVN-Revision: 48944
2016-03-07 11:03:29 +00:00

361 lines
7.4 KiB
Bash
Executable File

#!/bin/sh
CFG=/etc/board.json
. /usr/share/libubox/jshn.sh
[ -f $CFG ] || exit 1
generate_static_network() {
uci -q batch <<-EOF
delete network.loopback
set network.loopback='interface'
set network.loopback.ifname='lo'
set network.loopback.proto='static'
set network.loopback.ipaddr='127.0.0.1'
set network.loopback.netmask='255.0.0.0'
delete network.globals
set network.globals='globals'
set network.globals.ula_prefix='auto'
EOF
if json_is_a dsl object; then
json_select dsl
if json_is_a atmbridge object; then
json_select atmbridge
local vpi vci encaps payload
json_get_vars vpi vci encaps payload
uci -q batch <<-EOF
delete network.atm
set network.atm='atm-bridge'
set network.atm.vpi='$vpi'
set network.atm.vci='$vci'
set network.atm.encaps='$encaps'
set network.atm.payload='$payload'
EOF
json_select ..
fi
if json_is_a modem object; then
json_select modem
local type annex firmware tone xfer_mode
json_get_vars type annex firmware tone xfer_mode
uci -q batch <<-EOF
delete network.dsl
set network.dsl='dsl'
set network.dsl.annex='$annex'
set network.dsl.firmware='$firmware'
set network.dsl.tone='$tone'
set network.dsl.xfer_mode='$xfer_mode'
EOF
json_select ..
fi
json_select ..
fi
}
addr_offset=2
generate_network() {
local ifname macaddr protocol type
json_select network
json_select "$1"
json_get_vars ifname macaddr protocol
json_select ..
json_select ..
[ -n "$ifname" ] || return
# force bridge for multi-interface devices (and lan)
case "$1:$ifname" in
*\ * | lan:*) type="bridge" ;;
esac
uci -q batch <<-EOF
delete network.$1
set network.$1='interface'
set network.$1.type='$type'
set network.$1.ifname='$ifname'
set network.$1.proto='none'
EOF
[ -n "$macaddr" ] && uci -q batch <<-EOF
delete network.$1_dev
set network.$1_dev='device'
set network.$1_dev.name='$ifname'
set network.$1_dev.macaddr='$macaddr'
EOF
case "$protocol" in
static)
local ipaddr
case "$1" in
lan) ipaddr="192.168.1.1" ;;
*) ipaddr="192.168.$((addr_offset++)).1" ;;
esac
uci -q batch <<-EOF
set network.$1.proto='static'
set network.$1.ipaddr='$ipaddr'
set network.$1.netmask='255.255.255.0'
set network.$1.ip6assign='60'
EOF
;;
dhcp)
# fixup IPv6 slave interface if parent is a bridge
[ "$type" = "bridge" ] && ifname="br-$1"
uci -q batch <<-EOF
set network.$1.proto='dhcp'
delete network.${1}6
set network.${1}6='interface'
set network.${1}6.ifname='$ifname'
set network.${1}6.proto='dhcpv6'
EOF
;;
pppoe)
# fixup IPv6 slave interface
ifname="pppoe-$1"
uci -q batch <<-EOF
set network.$1.proto='pppoe'
set network.$1.username='username'
set network.$1.password='password'
set network.$1.ipv6='auto'
delete network.${1}6
set network.${1}6='interface'
set network.${1}6.ifname='$ifname'
set network.${1}6.proto='dhcpv6'
EOF
;;
esac
}
generate_switch_vlans_ports() {
local switch="$1"
local port ports role roles num attr val
#
# autogenerate vlans
#
json_get_keys roles roles
json_select roles
for role in $roles; do
json_select "$role"
json_get_vars ports
json_select ..
uci -q batch <<-EOF
add network switch_vlan
set network.@switch_vlan[-1].device='$switch'
set network.@switch_vlan[-1].vlan='$role'
set network.@switch_vlan[-1].ports='$ports'
EOF
done
json_select ..
#
# write port specific settings
#
json_get_keys ports ports
json_select ports
for port in $ports; do
json_select "$port"
json_get_vars num
if json_is_a attr object; then
json_get_keys attr attr
json_select attr
uci -q batch <<-EOF
add network switch_port
set network.@switch_port[-1].device='$switch'
set network.@switch_port[-1].port=$num
EOF
for attr in $attr; do
json_get_var val "$attr"
uci -q set network.@switch_port[-1].$attr="$val"
done
json_select ..
fi
json_select ..
done
json_select ..
}
generate_switch() {
local key="$1"
local vlans
json_select switch
json_select "$key"
json_get_vars enable reset blinkrate cpu_port
uci -q batch <<-EOF
add network switch
set network.@switch[-1].name='$key'
set network.@switch[-1].reset='$reset'
set network.@switch[-1].enable_vlan='$enable'
set network.@switch[-1].blinkrate='$blinkrate'
EOF
generate_switch_vlans_ports "$1"
json_select ..
json_select ..
}
generate_rssimon() {
local key="$1"
local cfg="rssid_$key"
local refresh threshold
json_select rssimon
json_select "$key"
json_get_vars refresh threshold
json_select ..
json_select ..
uci -q batch <<-EOF
delete system.$cfg
set system.$cfg='rssid'
set system.$cfg.dev='$key'
set system.$cfg.refresh='$refresh'
set system.$cfg.threshold='$threshold'
EOF
}
generate_led() {
local key="$1"
local cfg="led_$key"
json_select led
json_select "$key"
json_get_vars name sysfs type trigger default
uci -q batch <<-EOF
delete system.$cfg
set system.$cfg='led'
set system.$cfg.name='$name'
set system.$cfg.sysfs='$sysfs'
set system.$cfg.trigger='$trigger'
set system.$cfg.default='$default'
EOF
case "$type" in
gpio)
local gpio inverted
json_get_vars gpio inverted
uci -q batch <<-EOF
set system.$cfg.trigger='gpio'
set system.$cfg.gpio='$gpio'
set system.$cfg.inverted='$inverted'
EOF
;;
netdev)
local device mode
json_get_vars device mode
uci -q batch <<-EOF
set system.$cfg.trigger='netdev'
set system.$cfg.mode='$mode'
set system.$cfg.dev='$device'
EOF
;;
usb)
local device
json_get_vars device
uci -q batch <<-EOF
set system.$cfg.trigger='usbdev'
set system.$cfg.interval='50'
set system.$cfg.dev='$device'
EOF
;;
rssi)
local iface minq maxq offset factor
json_get_vars iface minq maxq offset factor
uci -q batch <<-EOF
set system.$cfg.trigger='rssi'
set system.$cfg.iface='rssid_$iface'
set system.$cfg.minq='$minq'
set system.$cfg.maxq='$maxq'
set system.$cfg.offset='$offset'
set system.$cfg.factor='$factor'
EOF
;;
switch)
local port_mask speed_mask
json_get_vars port_mask speed_mask
uci -q batch <<-EOF
set system.$cfg.port_mask='$port_mask'
set system.$cfg.speed_mask='$speed_mask'
EOF
;;
timer|oneshot)
local delayon delayoff
json_get_vars delayon delayoff
uci -q batch <<-EOF
set system.$cfg.trigger='$type'
set system.$cfg.delayon='$delayon'
set system.$cfg.delayoff='$delayoff'
EOF
;;
esac
json_select ..
json_select ..
}
generate_gpioswitch() {
local cfg="$1"
json_select gpioswitch
json_select "$cfg"
local name pin default
json_get_vars name pin default
uci -q batch <<-EOF
delete system.$cfg
set system.$cfg='gpio_switch'
set system.$cfg.name='$name'
set system.$cfg.gpio_pin='$pin'
set system.$cfg.default='$default'
EOF
json_select ..
json_select ..
}
json_init
json_load "$(cat ${CFG})"
generate_static_network
json_get_keys keys network
for key in $keys; do generate_network $key; done
json_get_keys keys switch
for key in $keys; do generate_switch $key; done
json_get_keys keys rssimon
for key in $keys; do generate_rssimon $key; done
json_get_keys keys gpioswitch
for key in $keys; do generate_gpioswitch $key; done
json_get_keys keys led
for key in $keys; do generate_led $key; done
uci commit