openwrt/target/linux/ar71xx/files/arch/mips/ath79/mach-lan-turtle.c
Sebastian Kinne 950b278c81 ar71xx: add support for AR9331 based Hak5 devices
This adds support for AR9331 based Hak5 penetration testing tools:

- WiFi Pineapple NANO
- LAN Turtle
- Packet Squirrel

WiFi Pineapple NANO specifications:

- SoC: Atheros AR9331 (400 MHz)
- RAM: 64 MB (DDR2)
- FLASH: 16 MB
- WiFi: 1T1R AR9331 (built-in), 1T1R AR9271 (built-in via USB bus)
- Ethernet: 1x FE over USB (ASIX AX88772A)
- Ports: 2x RP-SMA for antennas, 1x USB 2.0 (host), 1x micro SD
- Power: USB 5 V, 1.5 A
- Other: status LED, reset button

LAN Turtle specifications:

- SoC: Atheros AR9331 (400 MHz)
- RAM: 64 MB (DDR2)
- FLASH: 16 MB
- WiFi: none
- Ethernet: 1x FE (AR9331), 1x FE over USB (Realtek RTL8152B)
- Ports: 1x RJ45, version dependent: micro SD or 3G SIM slot
- Power: USB 5 V, 0.5 A
- Other: status LED, reset button (inside, on PCB)

Packet Squirrel specifications:

- SoC: Atheros AR9331 (400 MHz)
- RAM: 64 MB (DDR2)
- FLASH: 16 MB
- WiFi: none
- Ethernet: 2x FE (AR9331)
- Ports: 2x RJ45, 1x USB 2.0
- Power: USB 5 V, 0.12 A
- Other: status LED, reset button, 4-way switch

Flash instructions for all 3 devices:

Original firmware is based on OpenWrt.
Use sysupgrade via SSH to flash.

Signed-off-by: Sebastian Kinne <contact@sebkinne.com>
[squashed commits, combined and reworked mach files, aligned board
naming with general convention, fixed minor issues, tested on real
hardware, reworded commit subject and description]
Signed-off-by: Piotr Dymacz <pepe2k@gmail.com>
2018-02-22 18:53:22 +01:00

179 lines
4.4 KiB
C

/*
* Hak5 LAN Turtle and Packet Squirrel boards support
*
* Copyright (C) 2018 Sebastian Kinne <seb@hak5.org>
* Copyright (C) 2018 Piotr Dymacz <pepe2k@gmail.com>
*
* This program is free software; you can redistribute it and/or modify it
* under the terms of the GNU General Public License version 2 as published
* by the Free Software Foundation.
*/
#include <linux/gpio.h>
#include <asm/mach-ath79/ath79.h>
#include <asm/mach-ath79/ar71xx_regs.h>
#include "common.h"
#include "dev-eth.h"
#include "dev-gpio-buttons.h"
#include "dev-leds-gpio.h"
#include "dev-m25p80.h"
#include "dev-usb.h"
#include "machtypes.h"
#define LAN_TURTLE_GPIO_BTN_RESET 11
#define LAN_TURTLE_GPIO_LED_SYS 13
#define PACKET_SQUIRREL_GPIO_BTN_SW1 18
#define PACKET_SQUIRREL_GPIO_BTN_SW2 20
#define PACKET_SQUIRREL_GPIO_BTN_SW3 21
#define PACKET_SQUIRREL_GPIO_BTN_SW4 24
#define PACKET_SQUIRREL_GPIO_BTN_RESET 11
#define PACKET_SQUIRREL_GPIO_LED_B 23
#define PACKET_SQUIRREL_GPIO_LED_G 22
#define PACKET_SQUIRREL_GPIO_LED_R 19
#define HAK5_KEYS_POLL_INTERVAL 20 /* msecs */
#define HAK5_KEYS_DEBOUNCE_INTERVAL (3 * HAK5_KEYS_POLL_INTERVAL)
static const char *hak5_part_probes[] = {
"tp-link",
NULL,
};
static struct flash_platform_data hak5_flash_data = {
.part_probes = hak5_part_probes,
};
/* LAN Turtle */
static struct gpio_led lan_turtle_leds_gpio[] __initdata = {
{
.name = "lan-turtle:orange:system",
.gpio = LAN_TURTLE_GPIO_LED_SYS,
.active_low = 1,
},
};
static struct gpio_keys_button lan_turtle_gpio_keys[] __initdata = {
{
.desc = "reset",
.type = EV_KEY,
.code = KEY_RESTART,
.debounce_interval = HAK5_KEYS_DEBOUNCE_INTERVAL,
.gpio = LAN_TURTLE_GPIO_BTN_RESET,
.active_low = 1,
},
};
/* Packet Squirrel */
static struct gpio_led packet_squirrel_leds_gpio[] __initdata = {
{
.name = "packet-squirrel:blue:system",
.gpio = PACKET_SQUIRREL_GPIO_LED_B,
.active_low = 1,
}, {
.name = "packet-squirrel:green:system",
.gpio = PACKET_SQUIRREL_GPIO_LED_G,
.active_low = 1,
}, {
.name = "packet-squirrel:red:system",
.gpio = PACKET_SQUIRREL_GPIO_LED_R,
.active_low = 1,
},
};
static struct gpio_keys_button packet_squirrel_gpio_keys[] __initdata = {
{
.desc = "reset",
.type = EV_KEY,
.code = KEY_RESTART,
.debounce_interval = HAK5_KEYS_DEBOUNCE_INTERVAL,
.gpio = PACKET_SQUIRREL_GPIO_BTN_RESET,
.active_low = 1,
}, {
.desc = "sw1",
.type = EV_KEY,
.code = BTN_0,
.debounce_interval = HAK5_KEYS_DEBOUNCE_INTERVAL,
.gpio = PACKET_SQUIRREL_GPIO_BTN_SW1,
.active_low = 1,
}, {
.desc = "sw2",
.type = EV_KEY,
.code = BTN_1,
.debounce_interval = HAK5_KEYS_DEBOUNCE_INTERVAL,
.gpio = PACKET_SQUIRREL_GPIO_BTN_SW2,
.active_low = 1,
}, {
.desc = "sw3",
.type = EV_KEY,
.code = BTN_2,
.debounce_interval = HAK5_KEYS_DEBOUNCE_INTERVAL,
.gpio = PACKET_SQUIRREL_GPIO_BTN_SW3,
.active_low = 1,
}, {
.desc = "sw4",
.type = EV_KEY,
.code = BTN_3,
.debounce_interval = HAK5_KEYS_DEBOUNCE_INTERVAL,
.gpio = PACKET_SQUIRREL_GPIO_BTN_SW4,
.active_low = 1,
},
};
static void __init hak5_common_setup(void)
{
u8 *mac = (u8 *) KSEG1ADDR(0x1f01fc00);
ath79_register_m25p80(&hak5_flash_data);
ath79_register_mdio(0, 0x0);
ath79_switch_data.phy_poll_mask = 0xfe;
ath79_init_mac(ath79_eth0_data.mac_addr, mac, 1);
ath79_register_eth(0);
ath79_init_mac(ath79_eth1_data.mac_addr, mac, -1);
ath79_register_eth(1);
ath79_register_usb();
/* GPIO11/12 */
ath79_gpio_function_disable(AR933X_GPIO_FUNC_UART_RTS_CTS_EN);
}
static void __init lan_turtle_setup(void)
{
hak5_common_setup();
/* GPIO13 */
ath79_gpio_function_disable(AR933X_GPIO_FUNC_ETH_SWITCH_LED0_EN);
ath79_register_leds_gpio(-1, ARRAY_SIZE(lan_turtle_leds_gpio),
lan_turtle_leds_gpio);
ath79_register_gpio_keys_polled(-1, HAK5_KEYS_POLL_INTERVAL,
ARRAY_SIZE(lan_turtle_gpio_keys),
lan_turtle_gpio_keys);
}
static void __init packet_squirrel_setup(void)
{
hak5_common_setup();
ath79_register_leds_gpio(-1, ARRAY_SIZE(packet_squirrel_leds_gpio),
packet_squirrel_leds_gpio);
ath79_register_gpio_keys_polled(-1, HAK5_KEYS_POLL_INTERVAL,
ARRAY_SIZE(packet_squirrel_gpio_keys),
packet_squirrel_gpio_keys);
}
MIPS_MACHINE(ATH79_MACH_LAN_TURTLE, "LAN-TURTLE",
"Hak5 LAN Turtle", lan_turtle_setup);
MIPS_MACHINE(ATH79_MACH_PACKET_SQUIRREL, "PACKET-SQUIRREL",
"Hak5 Packet Squirrel", packet_squirrel_setup);