mirror of
https://github.com/openwrt/openwrt.git
synced 2024-12-20 06:08:08 +00:00
2e715fb4fc
Add support for BCM2712 (Raspberry Pi 5).
3bb5880ab3
Patches were generated from the diff between linux kernel branch linux-6.1.y
and rpi-6.1.y from raspberry pi kernel source:
- git format-patch linux-6.1.y...rpi-6.1.y
Build system: x86_64
Build-tested: bcm2708, bcm2709, bcm2710, bcm2711
Run-tested: bcm2710/RPi3B, bcm2711/RPi4B
Signed-off-by: Marty Jones <mj8263788@gmail.com>
[Remove applied and reverted patches, squash patches and config commits]
Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
42 lines
1.5 KiB
Diff
42 lines
1.5 KiB
Diff
From 686fe776309fba5cad642c40177d39bf1fb320b2 Mon Sep 17 00:00:00 2001
|
|
From: Phil Elwell <phil@raspberrypi.com>
|
|
Date: Tue, 7 Nov 2023 14:49:47 +0000
|
|
Subject: [PATCH] spi: dw-dma: Get the last DMA scoop out of the FIFO
|
|
|
|
With a DMA FIFO threshold greater than 1 (encoded as 0), it is possible
|
|
for data in the FIFO to be inaccessible, causing the transfer to fail
|
|
after a timeout. If the transfer includes a transmission, reduce the
|
|
RX threshold when the TX completes, otherwise use 1 for the whole
|
|
transfer (inefficient, but not catastrophic at SPI data rates).
|
|
|
|
See: https://github.com/raspberrypi/linux/issues/5696
|
|
|
|
Signed-off-by: Phil Elwell <phil@raspberrypi.com>
|
|
---
|
|
drivers/spi/spi-dw-dma.c | 6 +++++-
|
|
1 file changed, 5 insertions(+), 1 deletion(-)
|
|
|
|
--- a/drivers/spi/spi-dw-dma.c
|
|
+++ b/drivers/spi/spi-dw-dma.c
|
|
@@ -275,8 +275,10 @@ static void dw_spi_dma_tx_done(void *arg
|
|
struct dw_spi *dws = arg;
|
|
|
|
clear_bit(DW_SPI_TX_BUSY, &dws->dma_chan_busy);
|
|
- if (test_bit(DW_SPI_RX_BUSY, &dws->dma_chan_busy))
|
|
+ if (test_bit(DW_SPI_RX_BUSY, &dws->dma_chan_busy)) {
|
|
+ dw_writel(dws, DW_SPI_DMARDLR, 0);
|
|
return;
|
|
+ }
|
|
|
|
complete(&dws->dma_completion);
|
|
}
|
|
@@ -602,6 +604,8 @@ static int dw_spi_dma_transfer(struct dw
|
|
|
|
nents = max(xfer->tx_sg.nents, xfer->rx_sg.nents);
|
|
|
|
+ dw_writel(dws, DW_SPI_DMARDLR, xfer->tx_buf ? (dws->rxburst - 1) : 0);
|
|
+
|
|
/*
|
|
* Execute normal DMA-based transfer (which submits the Rx and Tx SG
|
|
* lists directly to the DMA engine at once) if either full hardware
|