mirror of
https://github.com/openwrt/openwrt.git
synced 2024-12-20 06:08:08 +00:00
793f8ab62c
Add kernel patches for version 6.1. Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
105 lines
3.6 KiB
Diff
105 lines
3.6 KiB
Diff
From 3bd2ed90a679b87d4dc3fe0a70a83c323df915de Mon Sep 17 00:00:00 2001
|
|
From: Dom Cobley <popcornmix@gmail.com>
|
|
Date: Wed, 11 Jan 2023 17:30:58 +0000
|
|
Subject: [PATCH] vc4/hdmi: Always enable GCP with AVMUTE cleared
|
|
|
|
See: https://forum.libreelec.tv/thread/24780-le-10-0-1-rpi4-no-picture-after-update-from-le-10-0-0
|
|
|
|
Issue is some displays go blank at the point of firmware to kms handover.
|
|
Plugging/unplugging hdmi cable, power cycling display, or switching standby off/on
|
|
typically resolve this case.
|
|
|
|
Finally managed to find a display that suffers from this, and track down the issue.
|
|
|
|
The firmware uses AVMUTE in normal operation. It will set AVMUTE before disabling hdmi
|
|
clocks and phy. It will clear AVMUTE after clocks and phy are set up for a new hdmi mode.
|
|
|
|
But with the hdmi handover from firmware to kms, AVMUTE will be set by firmware.
|
|
|
|
kms driver typically has no GCP packet (except for deep colour modes).
|
|
The spec isn't clear on whether to consider the AVMUTE as continuing indefinitely
|
|
in the absense of a GCP packet, or to consider that state to have ended.
|
|
|
|
Most displays behave as we want, but there are a number (from mutiple manufacturers)
|
|
which need to see AVMUTE cleared before displaying a picture.
|
|
|
|
Lets just always enable GCP packet with AVMUTE cleared. That resolves the issue on
|
|
problematic displays.
|
|
|
|
From HDMI 1.4 spec:
|
|
A CD field of zero (Color Depth not indicated) shall be used whenever the Sink does
|
|
not indicate support for Deep Color. This value may also be used in Deep Color mode
|
|
to transmit a GCP indicating only non-Deep Color information (e.g. AVMUTE).
|
|
|
|
So use CD=0 where we were previously not enabling a GCP.
|
|
|
|
Signed-off-by: Dom Cobley <popcornmix@gmail.com>
|
|
---
|
|
drivers/gpu/drm/vc4/vc4_hdmi.c | 18 +++++++++---------
|
|
1 file changed, 9 insertions(+), 9 deletions(-)
|
|
|
|
--- a/drivers/gpu/drm/vc4/vc4_hdmi.c
|
|
+++ b/drivers/gpu/drm/vc4/vc4_hdmi.c
|
|
@@ -107,6 +107,10 @@
|
|
#define VC5_HDMI_GCP_WORD_1_GCP_SUBPACKET_BYTE_1_SHIFT 8
|
|
#define VC5_HDMI_GCP_WORD_1_GCP_SUBPACKET_BYTE_1_MASK VC4_MASK(15, 8)
|
|
|
|
+#define VC5_HDMI_GCP_WORD_1_GCP_SUBPACKET_BYTE_0_MASK VC4_MASK(7, 0)
|
|
+#define VC5_HDMI_GCP_WORD_1_GCP_SUBPACKET_BYTE_0_SET_AVMUTE BIT(0)
|
|
+#define VC5_HDMI_GCP_WORD_1_GCP_SUBPACKET_BYTE_0_CLEAR_AVMUTE BIT(4)
|
|
+
|
|
# define VC4_HD_M_SW_RST BIT(2)
|
|
# define VC4_HD_M_ENABLE BIT(0)
|
|
|
|
@@ -1559,7 +1563,6 @@ static void vc5_hdmi_set_timings(struct
|
|
VC4_HDMI_VERTB_VBP));
|
|
unsigned long flags;
|
|
unsigned char gcp;
|
|
- bool gcp_en;
|
|
u32 reg;
|
|
int idx;
|
|
|
|
@@ -1594,16 +1597,13 @@ static void vc5_hdmi_set_timings(struct
|
|
switch (vc4_state->output_bpc) {
|
|
case 12:
|
|
gcp = 6;
|
|
- gcp_en = true;
|
|
break;
|
|
case 10:
|
|
gcp = 5;
|
|
- gcp_en = true;
|
|
break;
|
|
case 8:
|
|
default:
|
|
- gcp = 4;
|
|
- gcp_en = false;
|
|
+ gcp = 0;
|
|
break;
|
|
}
|
|
|
|
@@ -1612,8 +1612,7 @@ static void vc5_hdmi_set_timings(struct
|
|
* doesn't signal in GCP.
|
|
*/
|
|
if (vc4_state->output_format == VC4_HDMI_OUTPUT_YUV422) {
|
|
- gcp = 4;
|
|
- gcp_en = false;
|
|
+ gcp = 0;
|
|
}
|
|
|
|
reg = HDMI_READ(HDMI_DEEP_COLOR_CONFIG_1);
|
|
@@ -1626,11 +1625,12 @@ static void vc5_hdmi_set_timings(struct
|
|
reg = HDMI_READ(HDMI_GCP_WORD_1);
|
|
reg &= ~VC5_HDMI_GCP_WORD_1_GCP_SUBPACKET_BYTE_1_MASK;
|
|
reg |= VC4_SET_FIELD(gcp, VC5_HDMI_GCP_WORD_1_GCP_SUBPACKET_BYTE_1);
|
|
+ reg &= ~VC5_HDMI_GCP_WORD_1_GCP_SUBPACKET_BYTE_0_MASK;
|
|
+ reg |= VC5_HDMI_GCP_WORD_1_GCP_SUBPACKET_BYTE_0_CLEAR_AVMUTE;
|
|
HDMI_WRITE(HDMI_GCP_WORD_1, reg);
|
|
|
|
reg = HDMI_READ(HDMI_GCP_CONFIG);
|
|
- reg &= ~VC5_HDMI_GCP_CONFIG_GCP_ENABLE;
|
|
- reg |= gcp_en ? VC5_HDMI_GCP_CONFIG_GCP_ENABLE : 0;
|
|
+ reg |= VC5_HDMI_GCP_CONFIG_GCP_ENABLE;
|
|
HDMI_WRITE(HDMI_GCP_CONFIG, reg);
|
|
|
|
reg = HDMI_READ(HDMI_MISC_CONTROL);
|