ExternalVendorCode/openwrt
1
0
Fork 0
mirror of https://github.com/openwrt/openwrt.git synced 2024-12-22 15:02:32 +00:00
Code Issues Actions 2 Packages Projects Releases Wiki Activity
94b4da9b4a
openwrt/include/image-commands.mk
Sungbo Eo 37753f34ac ramips: add support for ipTIME AX2004M 
ipTIME AX2004M is an 802.11ax (Wi-Fi 6) router, based on MediaTek
MT7621A.

Specifications:
* SoC: MT7621A
* RAM: 256 MiB
* Flash: NAND 128 MiB
* Wi-Fi:
  * MT7915D: 2.4/5 GHz (DBDC)
* Ethernet: 5x 1GbE
  * Switch: SoC built-in
* USB: 1x 3.0
* UART: J4 (115200 baud)
  * Pinout: [3V3] (TXD) (RXD) (GND)

MAC addresses:

| interface |    MAC address    |     source     | comment
|-----------|-------------------|----------------|---------
|       LAN | 58:xx:xx:00:xx:9B |                | [1]
|       WAN | 58:xx:xx:00:xx:99 |                |
|   WLAN 2G | 58:xx:xx:00:xx:98 | factory 0x4    |
|   WLAN 5G | 5A:xx:xx:40:xx:98 |                |
|           | 58:xx:xx:00:xx:98 | config ethaddr |

[1] Used in this patch as WLAN 5G MAC address with the local bit set

Load addresses:
* stock
  * 0x80010000: FIT image
  * 0x81001000: kernel image -> entry
* OpenWrt
  * 0x80010000: FIT image
  * 0x82000000: uncompressed kernel+relocate image
  * 0x80001000: relocated kernel image -> entry

Notes:
* This device has a dual-boot partition scheme, but this firmware works
  only on boot partition 1. The stock web interface will flash only on the
  inactive boot partition, but the recovery web page will always flash on
  boot partition 1.

Installation via recovery mode:
1.  Press reset button, power up the device, wait >10s for CPU LED
    to stop blinking.
2.  Upload recovery image through the recovery web page at 192.168.0.1.

Revert to stock firmware:
1.  Install stock image via recovery mode.

Signed-off-by: Sungbo Eo <mans0n@gorani.run>
2022-02-11 22:30:04 +09:00

564 lines
16 KiB
Makefile
Raw Blame History

# Build commands that can be called from Device/* templates
IMAGE_KERNEL = $(word 1,$^)
IMAGE_ROOTFS = $(word 2,$^)
define ModelNameLimit16
$(shell expr substr "$(word 2, $(subst _, ,$(1)))" 1 16)
endef
define rootfs_align
$(patsubst %-256k,0x40000,$(patsubst %-128k,0x20000,$(patsubst %-64k,0x10000,$(patsubst squashfs%,0x4,$(patsubst root.%,%,$(1))))))
endef
define Build/append-dtb
cat $(KDIR)/image-$(firstword $(DEVICE_DTS)).dtb >> $@
endef
define Build/append-dtb-elf
$(TARGET_CROSS)objcopy \
--set-section-flags=.appended_dtb=alloc,contents \
--update-section \
.appended_dtb=$(KDIR)/image-$(firstword $(DEVICE_DTS)).dtb $@
endef
define Build/append-kernel
dd if=$(IMAGE_KERNEL) >> $@
endef
define Build/package-kernel-ubifs
mkdir $@.kernelubifs
cp $@ $@.kernelubifs/kernel
$(STAGING_DIR_HOST)/bin/mkfs.ubifs \
$(KERNEL_UBIFS_OPTS) \
-r $@.kernelubifs $@
rm -r $@.kernelubifs
endef
define Build/append-image
dd if=$(BIN_DIR)/$(DEVICE_IMG_PREFIX)-$(1) >> $@
endef
ifdef IB
define Build/append-image-stage
dd if=$(STAGING_DIR_IMAGE)/$(BOARD)$(if $(SUBTARGET),-$(SUBTARGET))-$(DEVICE_NAME)-$(1) >> $@
endef
else
define Build/append-image-stage
dd if=$(BIN_DIR)/$(DEVICE_IMG_PREFIX)-$(1) of=$(STAGING_DIR_IMAGE)/$(BOARD)$(if $(SUBTARGET),-$(SUBTARGET))-$(DEVICE_NAME)-$(1)
dd if=$(BIN_DIR)/$(DEVICE_IMG_PREFIX)-$(1) >> $@
endef
endif
compat_version=$(if $(DEVICE_COMPAT_VERSION),$(DEVICE_COMPAT_VERSION),1.0)
json_quote=$(subst ','\'',$(subst ",\",$(1)))
#")')
legacy_supported_message=$(SUPPORTED_DEVICES) - Image version mismatch: image $(compat_version), \
device 1.0. Please wipe config during upgrade (force required) or reinstall. \
$(if $(DEVICE_COMPAT_MESSAGE),Reason: $(DEVICE_COMPAT_MESSAGE),Please check documentation ...)
metadata_devices=$(if $(1),$(subst "$(space)","$(comma)",$(strip $(foreach v,$(1),"$(call json_quote,$(v))"))))
metadata_json = \
'{ $(if $(IMAGE_METADATA),$(IMAGE_METADATA)$(comma)) \
"metadata_version": "1.1", \
"compat_version": "$(call json_quote,$(compat_version))", \
$(if $(DEVICE_COMPAT_MESSAGE),"compat_message": "$(call json_quote,$(DEVICE_COMPAT_MESSAGE))"$(comma)) \
$(if $(filter-out 1.0,$(compat_version)),"new_supported_devices": \
[$(call metadata_devices,$(SUPPORTED_DEVICES))]$(comma) \
"supported_devices": ["$(call json_quote,$(legacy_supported_message))"]$(comma)) \
$(if $(filter 1.0,$(compat_version)),"supported_devices":[$(call metadata_devices,$(SUPPORTED_DEVICES))]$(comma)) \
"version": { \
"dist": "$(call json_quote,$(VERSION_DIST))", \
"version": "$(call json_quote,$(VERSION_NUMBER))", \
"revision": "$(call json_quote,$(REVISION))", \
"target": "$(call json_quote,$(TARGETID))", \
"board": "$(call json_quote,$(if $(BOARD_NAME),$(BOARD_NAME),$(DEVICE_NAME)))" \
} \
}'
define Build/append-metadata
$(if $(SUPPORTED_DEVICES),-echo $(call metadata_json) | fwtool -I - $@)
[ ! -s "$(BUILD_KEY)" -o ! -s "$(BUILD_KEY).ucert" -o ! -s "$@" ] || { \
cp "$(BUILD_KEY).ucert" "$@.ucert" ;\
usign -S -m "$@" -s "$(BUILD_KEY)" -x "$@.sig" ;\
ucert -A -c "$@.ucert" -x "$@.sig" ;\
fwtool -S "$@.ucert" "$@" ;\
}
endef
define Build/append-rootfs
dd if=$(IMAGE_ROOTFS) >> $@
endef
define Build/append-squashfs-fakeroot-be
rm -rf $@.fakefs $@.fakesquashfs
mkdir $@.fakefs
$(STAGING_DIR_HOST)/bin/mksquashfs-lzma \
$@.fakefs $@.fakesquashfs \
-noappend -root-owned -be -nopad -b 65536 \
$(if $(SOURCE_DATE_EPOCH),-fixed-time $(SOURCE_DATE_EPOCH))
cat $@.fakesquashfs >> $@
endef
define Build/append-string
echo -n $(1) >> $@
endef
define Build/append-ubi
sh $(TOPDIR)/scripts/ubinize-image.sh \
$(if $(UBOOTENV_IN_UBI),--uboot-env) \
$(if $(KERNEL_IN_UBI),--kernel $(IMAGE_KERNEL)) \
$(foreach part,$(UBINIZE_PARTS),--part $(part)) \
--rootfs $(IMAGE_ROOTFS) \
$@.tmp \
-p $(BLOCKSIZE:%k=%KiB) -m $(PAGESIZE) \
$(if $(SUBPAGESIZE),-s $(SUBPAGESIZE)) \
$(if $(VID_HDR_OFFSET),-O $(VID_HDR_OFFSET)) \
$(UBINIZE_OPTS)
cat $@.tmp >> $@
rm $@.tmp
endef
define Build/ubinize-kernel
cp $@ $@.tmp
sh $(TOPDIR)/scripts/ubinize-image.sh \
--kernel $@.tmp \
$@ \
-p $(BLOCKSIZE:%k=%KiB) -m $(PAGESIZE) \
$(if $(SUBPAGESIZE),-s $(SUBPAGESIZE)) \
$(if $(VID_HDR_OFFSET),-O $(VID_HDR_OFFSET)) \
$(UBINIZE_OPTS)
rm $@.tmp
endef
define Build/append-uboot
dd if=$(UBOOT_PATH) >> $@
endef
# append a fake/empty uImage header, to fool bootloaders rootfs integrity check
# for example
define Build/append-uImage-fakehdr
$(eval type=$(word 1,$(1)))
$(eval magic=$(word 2,$(1)))
touch $@.fakehdr
$(STAGING_DIR_HOST)/bin/mkimage \
-A $(LINUX_KARCH) -O linux -T $(type) -C none \
-n '$(VERSION_DIST) fake $(type)' \
$(if $(magic),-M $(magic)) \
-d $@.fakehdr \
-s \
$@.fakehdr
cat $@.fakehdr >> $@
endef
define Build/buffalo-dhp-image
$(STAGING_DIR_HOST)/bin/mkdhpimg $@ $@.new
mv $@.new $@
endef
define Build/buffalo-enc
$(eval product=$(word 1,$(1)))
$(eval version=$(word 2,$(1)))
$(eval args=$(wordlist 3,$(words $(1)),$(1)))
$(STAGING_DIR_HOST)/bin/buffalo-enc \
-p $(product) -v $(version) $(args) \
-i $@ -o $@.new
mv $@.new $@
endef
define Build/buffalo-enc-tag
$(call Build/buffalo-enc,'' '' -S 152 $(1))
endef
define Build/buffalo-tag-dhp
$(eval product=$(word 1,$(1)))
$(eval region=$(word 2,$(1)))
$(eval language=$(word 3,$(1)))
$(STAGING_DIR_HOST)/bin/buffalo-tag \
-d 0x01000000 -w 1 \
-a $(BUFFALO_TAG_PLATFORM) \
-v $(BUFFALO_TAG_VERSION) -m $(BUFFALO_TAG_MINOR) \
-b $(product) -p $(product) \
-r $(region) -r $(region) -l $(language) \
-I $@ -o $@.new
mv $@.new $@
endef
define Build/check-size
@imagesize="$$(stat -c%s $@)"; \
limitsize="$$(($(subst k,* 1024,$(subst m, * 1024k,$(if $(1),$(1),$(IMAGE_SIZE))))))"; \
[ $$limitsize -ge $$imagesize ] || { \
echo "WARNING: Image file $@ is too big: $$imagesize > $$limitsize" >&2; \
rm -f $@; \
}
endef
define Build/copy-file
cat "$(1)" > "$@"
endef
define Build/elecom-product-header
$(eval product=$(word 1,$(1)))
$(eval fw=$(if $(word 2,$(1)),$(word 2,$(1)),$@))
( \
echo -n -e "ELECOM\x00\x00$(product)" | dd bs=40 count=1 conv=sync; \
echo -n "0.00" | dd bs=16 count=1 conv=sync; \
dd if=$(fw); \
) > $(fw).new
mv $(fw).new $(fw)
endef
define Build/elecom-wrc-gs-factory
$(eval product=$(word 1,$(1)))
$(eval version=$(word 2,$(1)))
$(eval hash_opt=$(word 3,$(1)))
$(MKHASH) md5 $(hash_opt) $@ >> $@
( \
echo -n "ELECOM $(product) v$(version)" | \
dd bs=32 count=1 conv=sync; \
dd if=$@; \
) > $@.new
mv $@.new $@
endef
define Build/elx-header
$(eval hw_id=$(word 1,$(1)))
$(eval xor_pattern=$(word 2,$(1)))
( \
echo -ne "\x00\x00\x00\x00\x00\x00\x00\x03" | \
dd bs=42 count=1 conv=sync; \
hw_id="$(hw_id)"; \
echo -ne "\x$${hw_id:0:2}\x$${hw_id:2:2}\x$${hw_id:4:2}\x$${hw_id:6:2}" | \
dd bs=20 count=1 conv=sync; \
echo -ne "$$(printf '%08x' $$(stat -c%s $@) | fold -s2 | xargs -I {} echo \\x{} | tr -d '\n')" | \
dd bs=8 count=1 conv=sync; \
echo -ne "$$($(MKHASH) md5 $@ | fold -s2 | xargs -I {} echo \\x{} | tr -d '\n')" | \
dd bs=58 count=1 conv=sync; \
) > $(KDIR)/tmp/$(DEVICE_NAME).header
$(call Build/xor-image,-p $(xor_pattern) -x)
cat $(KDIR)/tmp/$(DEVICE_NAME).header $@ > $@.new
mv $@.new $@
rm -rf $(KDIR)/tmp/$(DEVICE_NAME).header
endef
define Build/eva-image
$(STAGING_DIR_HOST)/bin/lzma2eva $(KERNEL_LOADADDR) $(KERNEL_LOADADDR) $@ $@.new
mv $@.new $@
endef
define Build/initrd_compression
$(if $(CONFIG_TARGET_INITRAMFS_COMPRESSION_BZIP2),.bzip2) \
$(if $(CONFIG_TARGET_INITRAMFS_COMPRESSION_GZIP),.gzip) \
$(if $(CONFIG_TARGET_INITRAMFS_COMPRESSION_LZMA),.lzma) \
$(if $(CONFIG_TARGET_INITRAMFS_COMPRESSION_XZ),.xz) \
$(if $(CONFIG_TARGET_INITRAMFS_COMPRESSION_ZSTD),.zstd)
endef
define Build/fit
$(TOPDIR)/scripts/mkits.sh \
-D $(DEVICE_NAME) -o $@.its -k $@ \
-C $(word 1,$(1)) $(if $(word 2,$(1)),\
$(if $(DEVICE_DTS_OVERLAY),-d $(KERNEL_BUILD_DIR)/image-$$(basename $(word 2,$(1))),\
-d $(word 2,$(1)))) \
$(if $(findstring with-rootfs,$(word 3,$(1))),-r $(IMAGE_ROOTFS)) \
$(if $(findstring with-initrd,$(word 3,$(1))), \
$(if $(CONFIG_TARGET_ROOTFS_INITRAMFS_SEPARATE), \
-i $(KERNEL_BUILD_DIR)/initrd.cpio$(strip $(call Build/initrd_compression)))) \
-a $(KERNEL_LOADADDR) -e $(if $(KERNEL_ENTRY),$(KERNEL_ENTRY),$(KERNEL_LOADADDR)) \
$(if $(DEVICE_FDT_NUM),-n $(DEVICE_FDT_NUM)) \
$(if $(DEVICE_DTS_DELIMITER),-l $(DEVICE_DTS_DELIMITER)) \
$(if $(DEVICE_DTS_OVERLAY),$(foreach dtso,$(DEVICE_DTS_OVERLAY), -O $(dtso):$(KERNEL_BUILD_DIR)/image-$(dtso).dtb)) \
-c $(if $(DEVICE_DTS_CONFIG),$(DEVICE_DTS_CONFIG),"config-1") \
-A $(LINUX_KARCH) -v $(LINUX_VERSION)
PATH=$(LINUX_DIR)/scripts/dtc:$(PATH) mkimage $(if $(findstring external,$(word 3,$(1))),\
-E -B 0x1000 $(if $(findstring static,$(word 3,$(1))),-p 0x1000)) -f $@.its $@.new
@mv $@.new $@
endef
define Build/gzip
gzip -f -9n -c $@ $(1) > $@.new
@mv $@.new $@
endef
define Build/install-dtb
$(call locked, \
$(foreach dts,$(DEVICE_DTS), \
$(CP) \
$(DTS_DIR)/$(dts).dtb \
$(BIN_DIR)/$(IMG_PREFIX)-$(dts).dtb; \
), \
install-dtb-$(IMG_PREFIX) \
)
endef
define Build/iptime-crc32
$(STAGING_DIR_HOST)/bin/iptime-crc32 $(1) $@ $@.new
mv $@.new $@
endef
define Build/iptime-naspkg
$(STAGING_DIR_HOST)/bin/iptime-naspkg $(1) $@ $@.new
mv $@.new $@
endef
define Build/jffs2
rm -rf $(KDIR_TMP)/$(DEVICE_NAME)/jffs2 && \
mkdir -p $(KDIR_TMP)/$(DEVICE_NAME)/jffs2/$$(dirname $(1)) && \
cp $@ $(KDIR_TMP)/$(DEVICE_NAME)/jffs2/$(1) && \
$(STAGING_DIR_HOST)/bin/mkfs.jffs2 --pad \
$(if $(CONFIG_BIG_ENDIAN),--big-endian,--little-endian) \
--squash-uids -v -e $(patsubst %k,%KiB,$(BLOCKSIZE)) \
-o $@.new \
-d $(KDIR_TMP)/$(DEVICE_NAME)/jffs2 \
2>&1 1>/dev/null | awk '/^.+$$$$/' && \
$(STAGING_DIR_HOST)/bin/padjffs2 $@.new -J $(patsubst %k,,$(BLOCKSIZE))
-rm -rf $(KDIR_TMP)/$(DEVICE_NAME)/jffs2/
@mv $@.new $@
endef
define Build/kernel2minor
$(eval temp_file := $(shell mktemp))
cp $@ $(temp_file)
kernel2minor -k $(temp_file) -r $(temp_file).new $(1)
mv $(temp_file).new $@
rm -f $(temp_file)
endef
define Build/kernel-bin
rm -f $@
cp $< $@
endef
define Build/linksys-image
$(TOPDIR)/scripts/linksys-image.sh \
"$(call param_get_default,type,$(1),$(DEVICE_NAME))" \
$@ $@.new
mv $@.new $@
endef
define Build/lzma
$(call Build/lzma-no-dict,-lc1 -lp2 -pb2 $(1))
endef
define Build/lzma-no-dict
$(STAGING_DIR_HOST)/bin/lzma e $@ $(1) $@.new
@mv $@.new $@
endef
define Build/netgear-chk
$(STAGING_DIR_HOST)/bin/mkchkimg \
-o $@.new \
-k $@ \
-b $(NETGEAR_BOARD_ID) \
$(if $(NETGEAR_REGION),-r $(NETGEAR_REGION),)
mv $@.new $@
endef
define Build/netgear-dni
$(STAGING_DIR_HOST)/bin/mkdniimg \
-B $(NETGEAR_BOARD_ID) -v $(VERSION_DIST).$(firstword $(subst -, ,$(REVISION))) \
$(if $(NETGEAR_HW_ID),-H $(NETGEAR_HW_ID)) \
-r "$(1)" \
-i $@ -o $@.new
mv $@.new $@
endef
define Build/openmesh-image
$(TOPDIR)/scripts/om-fwupgradecfg-gen.sh \
"$(call param_get_default,ce_type,$(1),$(DEVICE_NAME))" \
"$@-fwupgrade.cfg" \
"$(call param_get_default,kernel,$(1),$(IMAGE_KERNEL))" \
"$(call param_get_default,rootfs,$(1),$@)"
$(TOPDIR)/scripts/combined-ext-image.sh \
"$(call param_get_default,ce_type,$(1),$(DEVICE_NAME))" "$@" \
"$@-fwupgrade.cfg" "fwupgrade.cfg" \
"$(call param_get_default,kernel,$(1),$(IMAGE_KERNEL))" "kernel" \
"$(call param_get_default,rootfs,$(1),$@)" "rootfs"
endef
define Build/pad-extra
dd if=/dev/zero bs=$(1) count=1 >> $@
endef
define Build/pad-offset
let \
size="$$(stat -c%s $@)" \
pad="$(subst k,* 1024,$(word 1, $(1)))" \
offset="$(subst k,* 1024,$(word 2, $(1)))" \
pad="(pad - ((size + offset) % pad)) % pad" \
newsize='size + pad'; \
dd if=$@ of=$@.new bs=$$newsize count=1 conv=sync
mv $@.new $@
endef
define Build/pad-rootfs
$(STAGING_DIR_HOST)/bin/padjffs2 $@ $(1) \
$(if $(BLOCKSIZE),$(BLOCKSIZE:%k=%),4 8 16 64 128 256)
endef
define Build/pad-to
$(call Image/pad-to,$@,$(1))
endef
define Build/patch-cmdline
$(STAGING_DIR_HOST)/bin/patch-cmdline $@ '$(CMDLINE)'
endef
# Convert a raw image into a $1 type image.
# E.g. | qemu-image vdi <optional extra arguments to qemu-img binary>
define Build/qemu-image
if command -v qemu-img; then \
qemu-img convert -f raw -O $1 $@ $@.new; \
mv $@.new $@; \
else \
echo "WARNING: Install qemu-img to create VDI/VMDK images" >&2; exit 1; \
fi
endef
define Build/qsdk-ipq-factory-nand
$(TOPDIR)/scripts/mkits-qsdk-ipq-image.sh \
$@.its ubi $@
PATH=$(LINUX_DIR)/scripts/dtc:$(PATH) mkimage -f $@.its $@.new
@mv $@.new $@
endef
define Build/qsdk-ipq-factory-nor
$(TOPDIR)/scripts/mkits-qsdk-ipq-image.sh \
$@.its hlos $(IMAGE_KERNEL) rootfs $(IMAGE_ROOTFS)
PATH=$(LINUX_DIR)/scripts/dtc:$(PATH) mkimage -f $@.its $@.new
@mv $@.new $@
endef
define Build/seama
$(STAGING_DIR_HOST)/bin/seama -i $@ \
-m "dev=/dev/mtdblock/$(SEAMA_MTDBLOCK)" -m "type=firmware"
mv $@.seama $@
endef
define Build/seama-seal
$(STAGING_DIR_HOST)/bin/seama -i $@ -s $@.seama \
-m "signature=$(SEAMA_SIGNATURE)"
mv $@.seama $@
endef
define Build/senao-header
$(STAGING_DIR_HOST)/bin/mksenaofw $(1) -e $@ -o $@.new
mv $@.new $@
endef
define Build/sysupgrade-tar
sh $(TOPDIR)/scripts/sysupgrade-tar.sh \
--board $(if $(BOARD_NAME),$(BOARD_NAME),$(DEVICE_NAME)) \
--kernel $(call param_get_default,kernel,$(1),$(IMAGE_KERNEL)) \
--rootfs $(call param_get_default,rootfs,$(1),$(IMAGE_ROOTFS)) \
$@
endef
define Build/tplink-safeloader
-$(STAGING_DIR_HOST)/bin/tplink-safeloader \
-B $(TPLINK_BOARD_ID) \
-V $(REVISION) \
-k $(IMAGE_KERNEL) \
-r $@ \
-o $@.new \
-j \
$(wordlist 2,$(words $(1)),$(1)) \
$(if $(findstring sysupgrade,$(word 1,$(1))),-S) && mv $@.new $@ || rm -f $@
endef
define Build/tplink-v1-header
$(STAGING_DIR_HOST)/bin/mktplinkfw \
-c -H $(TPLINK_HWID) -W $(TPLINK_HWREV) -L $(KERNEL_LOADADDR) \
-E $(if $(KERNEL_ENTRY),$(KERNEL_ENTRY),$(KERNEL_LOADADDR)) \
-m $(TPLINK_HEADER_VERSION) -N "$(VERSION_DIST)" -V $(REVISION) \
-k $@ -o $@.new $(1)
@mv $@.new $@
endef
# combine kernel and rootfs into one image
# mktplinkfw <type> <optional extra arguments to mktplinkfw binary>
# <type> is "sysupgrade" or "factory"
#
# -a align the rootfs start on an <align> bytes boundary
# -j add jffs2 end-of-filesystem markers
# -s strip padding from end of the image
# -X reserve <size> bytes in the firmware image (hexval prefixed with 0x)
define Build/tplink-v1-image
-$(STAGING_DIR_HOST)/bin/mktplinkfw \
-H $(TPLINK_HWID) -W $(TPLINK_HWREV) -F $(TPLINK_FLASHLAYOUT) \
-N "$(VERSION_DIST)" -V $(REVISION) -m $(TPLINK_HEADER_VERSION) \
-k $(IMAGE_KERNEL) -r $(IMAGE_ROOTFS) -o $@.new -j -X 0x40000 \
-a $(call rootfs_align,$(FILESYSTEM)) \
$(wordlist 2,$(words $(1)),$(1)) \
$(if $(findstring sysupgrade,$(word 1,$(1))),-s) && mv $@.new $@ || rm -f $@
endef
define Build/tplink-v2-header
$(STAGING_DIR_HOST)/bin/mktplinkfw2 \
-c -H $(TPLINK_HWID) -W $(TPLINK_HWREV) -L $(KERNEL_LOADADDR) \
-E $(if $(KERNEL_ENTRY),$(KERNEL_ENTRY),$(KERNEL_LOADADDR)) \
-w $(TPLINK_HWREVADD) -F "$(TPLINK_FLASHLAYOUT)" \
-T $(TPLINK_HVERSION) -V "ver. 2.0" \
-k $@ -o $@.new $(1)
@mv $@.new $@
endef
define Build/tplink-v2-image
$(STAGING_DIR_HOST)/bin/mktplinkfw2 \
-H $(TPLINK_HWID) -W $(TPLINK_HWREV) \
-w $(TPLINK_HWREVADD) -F "$(TPLINK_FLASHLAYOUT)" \
-T $(TPLINK_HVERSION) -V "ver. 2.0" -a 0x4 -j \
-k $(IMAGE_KERNEL) -r $(IMAGE_ROOTFS) -o $@.new $(1)
cat $@.new >> $@
rm -rf $@.new
endef
define Build/uImage
mkimage \
-A $(LINUX_KARCH) \
-O linux \
-T kernel \
-C $(word 1,$(1)) \
-a $(KERNEL_LOADADDR) \
-e $(if $(KERNEL_ENTRY),$(KERNEL_ENTRY),$(KERNEL_LOADADDR)) \
-n '$(if $(UIMAGE_NAME),$(UIMAGE_NAME),$(call toupper,$(LINUX_KARCH)) $(VERSION_DIST) Linux-$(LINUX_VERSION))' \
$(if $(UIMAGE_MAGIC),-M $(UIMAGE_MAGIC)) \
$(wordlist 2,$(words $(1)),$(1)) \
-d $@ $@.new
mv $@.new $@
endef
define Build/xor-image
$(STAGING_DIR_HOST)/bin/xorimage -i $@ -o $@.xor $(1)
mv $@.xor $@
endef
define Build/zip
rm -rf $@.tmp
mkdir $@.tmp
mv $@ $@.tmp/$(word 1,$(1))
$(STAGING_DIR_HOST)/bin/zip -j -X \
$(if $(SOURCE_DATE_EPOCH),--mtime="$(SOURCE_DATE_EPOCH)") \
$(wordlist 2,$(words $(1)),$(1)) \
$@ $@.tmp/$(if $(word 1,$(1)),$(word 1,$(1)),$$(basename $@))
rm -rf $@.tmp
endef
define Build/zyxel-ras-image
let \
newsize="$(subst k,* 1024,$(RAS_ROOTFS_SIZE))"; \
$(STAGING_DIR_HOST)/bin/mkrasimage \
-b $(RAS_BOARD) \
-v $(RAS_VERSION) \
-r $@ \
-s $$newsize \
-o $@.new \
$(if $(findstring separate-kernel,$(word 1,$(1))),-k $(IMAGE_KERNEL)) \
&& mv $@.new $@
endef
Reference in New Issue View Git Blame Copy Permalink