mirror of
https://github.com/openwrt/openwrt.git
synced 2024-12-23 23:42:43 +00:00
bbcd5111cb
Radxa ROCK Pi S is a small in size, full in features SBC[1] using the Rockchip RK3308B SoC. Hardware -------- - Rockchip RK3308B SoC - Quad A35 CPU - 256/512MB DDR3 RAM - Optional 4/8GB eMMC - Micro SD Card slot - Optional WiFi 4 and BT 4 (not supported yet) - 1x 100M Ethernet with PoE support (additional PoE HAT required) - 1x USB 2.0 Type-A port (Host) - 1x USB 2.0 Type-C port (OTG) - 2x 26 Pin GPIO header [1] https://radxa.com/products/rockpi/pis Installation ------------ Uncompress the OpenWrt sysupgrade and write it to a micro SD card or internal eMMC using dd. Signed-off-by: FUKAUMI Naoki <naoki@radxa.com> Link: https://github.com/openwrt/openwrt/pull/15933 Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
62 lines
1.7 KiB
Diff
62 lines
1.7 KiB
Diff
From 4b64ed510ed946a4e4ca6d51d6512bf5361f6a04 Mon Sep 17 00:00:00 2001
|
|
From: Jonas Karlman <jonas@kwiboo.se>
|
|
Date: Tue, 21 May 2024 21:10:10 +0000
|
|
Subject: [PATCH] arm64: dts: rockchip: Add mdio and ethernet-phy nodes to
|
|
rk3308-rock-pi-s
|
|
|
|
Be explicit about the Ethernet port and define mdio and ethernet-phy
|
|
nodes in the device tree for ROCK Pi S.
|
|
|
|
Fixes: bc3753aed81f ("arm64: dts: rockchip: rock-pi-s add more peripherals")
|
|
Signed-off-by: Jonas Karlman <jonas@kwiboo.se>
|
|
Link: https://lore.kernel.org/r/20240521211029.1236094-8-jonas@kwiboo.se
|
|
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
|
|
---
|
|
.../boot/dts/rockchip/rk3308-rock-pi-s.dts | 26 ++++++++++++++++---
|
|
1 file changed, 23 insertions(+), 3 deletions(-)
|
|
|
|
--- a/arch/arm64/boot/dts/rockchip/rk3308-rock-pi-s.dts
|
|
+++ b/arch/arm64/boot/dts/rockchip/rk3308-rock-pi-s.dts
|
|
@@ -144,11 +144,25 @@
|
|
|
|
&gmac {
|
|
clock_in_out = "output";
|
|
+ phy-handle = <&rtl8201f>;
|
|
phy-supply = <&vcc_io>;
|
|
- snps,reset-gpio = <&gpio0 RK_PA7 GPIO_ACTIVE_LOW>;
|
|
- snps,reset-active-low;
|
|
- snps,reset-delays-us = <0 50000 50000>;
|
|
status = "okay";
|
|
+
|
|
+ mdio {
|
|
+ compatible = "snps,dwmac-mdio";
|
|
+ #address-cells = <1>;
|
|
+ #size-cells = <0>;
|
|
+
|
|
+ rtl8201f: ethernet-phy@1 {
|
|
+ compatible = "ethernet-phy-ieee802.3-c22";
|
|
+ reg = <1>;
|
|
+ pinctrl-names = "default";
|
|
+ pinctrl-0 = <&mac_rst>;
|
|
+ reset-assert-us = <20000>;
|
|
+ reset-deassert-us = <50000>;
|
|
+ reset-gpios = <&gpio0 RK_PA7 GPIO_ACTIVE_LOW>;
|
|
+ };
|
|
+ };
|
|
};
|
|
|
|
&gpio0 {
|
|
@@ -221,6 +235,12 @@
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&rtc_32k>;
|
|
|
|
+ gmac {
|
|
+ mac_rst: mac-rst {
|
|
+ rockchip,pins = <0 RK_PA7 RK_FUNC_GPIO &pcfg_pull_none>;
|
|
+ };
|
|
+ };
|
|
+
|
|
leds {
|
|
green_led: green-led {
|
|
rockchip,pins = <0 RK_PA6 RK_FUNC_GPIO &pcfg_pull_none>;
|