openwrt/target/linux/mvebu
Sungbo Eo 6ff970bb51 mvebu: add support for ipTIME NAS1dual
ipTIME NAS1dual is a 1-bay NAS, based on Marvell Armada 385 SoC.

Specifications:
* SoC: 88F6820
* RAM: 2 GiB
* Flash: SPI NOR 64 MiB
* SATA: 1x 3Gb/s
* Ethernet: 2x 1GbE
* USB: 1x 3.0
* Fan: 2 speed level
* UART: J11 (115200 8N1)
  * Pinout: [3V3] (TXD) (RXD) (GND)

Installation via web interface:
1.  Flash **initramfs** image through the stock web interface.
2.  Boot into OpenWrt and perform sysupgrade with sysupgrade image.

Revert to stock firmware:
1.  Perform sysupgrade with stock image.

Signed-off-by: Sungbo Eo <mans0n@gorani.run>
2022-01-29 23:50:28 +09:00
..
base-files/lib/preinit mvebu: switch to generic sdcard upgrade method 2021-08-07 01:43:39 +03:00
cortexa9 mvebu: add support for ipTIME NAS1dual 2022-01-29 23:50:28 +09:00
cortexa53 mvebu: remove duplicate CONFIG_POWER_RESET entries 2022-01-29 23:50:28 +09:00
cortexa72 mvebu: remove duplicate CONFIG_POWER_RESET entries 2022-01-29 23:50:28 +09:00
files/arch mvebu: add support for ipTIME NAS1dual 2022-01-29 23:50:28 +09:00
image mvebu: add support for ipTIME NAS1dual 2022-01-29 23:50:28 +09:00
patches-5.10 mvebu: puzzle-mcu: improve led driver 2021-12-21 21:54:42 +00:00
config-5.10 kernel: add disabled POWER_RESET_QNAP 2022-01-29 23:50:28 +09:00
Makefile mvebu: switch to kernel 5.10 2021-09-08 13:28:22 -10:00
modules.mk mvebu: remove duplicate CONFIG_POWER_RESET entries 2022-01-29 23:50:28 +09:00