mirror of
https://github.com/openwrt/openwrt.git
synced 2024-12-29 10:08:59 +00:00
99c81eab78
Without this patch PowerCloud CR5000 AR9382 PCIe 5GHz Wifi uses the mac address from eeprom instead the one specified when initializing the PCIe chip. There were two issues: 1) ap94_pci_init on the second PCIe wmac is wrong as there is only one PCIe wmac on this device (the other wmac is the AR1022/AR9342 SoC wmac). 2) Without specifying pdata->use_eeprom there is a failure to load firmware and caldata. Thanks to Christian Lamparter (@chunkeey) for the heavy lifting and help. [0] [0] <https://github.com/openwrt/openwrt/pull/1613> Signed-off-by: Daniel F. Dickinson <cshored@thecshore.com>
180 lines
5.1 KiB
C
180 lines
5.1 KiB
C
/*
|
|
* PowerCloud Systems CR5000 support
|
|
*
|
|
* Copyright (c) 2011 Qualcomm Atheros
|
|
* Copyright (c) 2011-2012 Gabor Juhos <juhosg@openwrt.org>
|
|
* Copyright (c) 2012-2013 PowerCloud Systems
|
|
* Copyright (c) 2015 Daniel Dickinson <openwrt@daniel.thecshore.com>
|
|
*
|
|
* Permission to use, copy, modify, and/or distribute this software for any
|
|
* purpose with or without fee is hereby granted, provided that the above
|
|
* copyright notice and this permission notice appear in all copies.
|
|
*
|
|
* THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES
|
|
* WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF
|
|
* MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR
|
|
* ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES
|
|
* WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN
|
|
* ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF
|
|
* OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
|
|
*
|
|
*/
|
|
|
|
#include <linux/gpio.h>
|
|
#include <linux/pci.h>
|
|
#include <linux/phy.h>
|
|
#include <linux/platform_device.h>
|
|
#include <linux/ath9k_platform.h>
|
|
#include <linux/ar8216_platform.h>
|
|
|
|
#include <asm/mach-ath79/ar71xx_regs.h>
|
|
#include <asm/mach-ath79/ath79.h>
|
|
|
|
#include "common.h"
|
|
#include "dev-ap9x-pci.h"
|
|
#include "dev-eth.h"
|
|
#include "dev-gpio-buttons.h"
|
|
#include "dev-leds-gpio.h"
|
|
#include "dev-m25p80.h"
|
|
#include "dev-spi.h"
|
|
#include "dev-usb.h"
|
|
#include "dev-wmac.h"
|
|
#include "machtypes.h"
|
|
|
|
#define CR5000_GPIO_LED_WLAN_2G 14
|
|
#define CR5000_GPIO_LED_WPS 12
|
|
#define CR5000_GPIO_LED_POWER_AMBER 4
|
|
/* GPIO2 has to have JTAG disabled as it is also to
|
|
* power led
|
|
*/
|
|
#define CR5000_GPIO_LED_POWER_ENABLE 2
|
|
#define CR5000_GPIO_BTN_WPS 16
|
|
#define CR5000_GPIO_BTN_RESET 17
|
|
|
|
#define CR5000_KEYS_POLL_INTERVAL 20 /* msecs */
|
|
#define CR5000_KEYS_DEBOUNCE_INTERVAL (3 * CR5000_KEYS_POLL_INTERVAL)
|
|
|
|
#define CR5000_MAC0_OFFSET 0
|
|
#define CR5000_WMAC_CALDATA_OFFSET 0x1000
|
|
#define CR5000_WMAC_MAC_OFFSET 0x1002
|
|
#define CR5000_PCIE_CALDATA_OFFSET 0x5000
|
|
#define CR5000_PCIE_WMAC_OFFSET 0x5002
|
|
|
|
static struct gpio_led cr5000_leds_gpio[] __initdata = {
|
|
{
|
|
.name = "pcs:amber:power",
|
|
.gpio = CR5000_GPIO_LED_POWER_AMBER,
|
|
.active_low = 1,
|
|
},
|
|
{
|
|
.name = "pcs:white:wps",
|
|
.gpio = CR5000_GPIO_LED_WPS,
|
|
.active_low = 1,
|
|
},
|
|
{
|
|
.name = "pcs:blue:wlan",
|
|
.gpio = CR5000_GPIO_LED_WLAN_2G,
|
|
.active_low = 1,
|
|
},
|
|
};
|
|
|
|
static struct gpio_keys_button cr5000_gpio_keys[] __initdata = {
|
|
{
|
|
.desc = "WPS button",
|
|
.type = EV_KEY,
|
|
.code = KEY_WPS_BUTTON,
|
|
.debounce_interval = CR5000_KEYS_DEBOUNCE_INTERVAL,
|
|
.gpio = CR5000_GPIO_BTN_WPS,
|
|
.active_low = 1,
|
|
},
|
|
{
|
|
.desc = "Reset button",
|
|
.type = EV_KEY,
|
|
.code = KEY_RESTART,
|
|
.debounce_interval = CR5000_KEYS_DEBOUNCE_INTERVAL,
|
|
.gpio = CR5000_GPIO_BTN_RESET,
|
|
.active_low = 1,
|
|
},
|
|
};
|
|
|
|
static struct ar8327_pad_cfg cr5000_ar8327_pad0_cfg = {
|
|
.mode = AR8327_PAD_MAC_RGMII,
|
|
.txclk_delay_en = true,
|
|
.rxclk_delay_en = true,
|
|
.txclk_delay_sel = AR8327_CLK_DELAY_SEL1,
|
|
.rxclk_delay_sel = AR8327_CLK_DELAY_SEL2,
|
|
};
|
|
|
|
static struct ar8327_led_cfg cr5000_ar8327_led_cfg = {
|
|
.led_ctrl0 = 0xcc35cc35,
|
|
.led_ctrl1 = 0xca35ca35,
|
|
.led_ctrl2 = 0xc935c935,
|
|
.led_ctrl3 = 0x03ffff00,
|
|
.open_drain = true,
|
|
};
|
|
|
|
static struct ar8327_platform_data cr5000_ar8327_data = {
|
|
.pad0_cfg = &cr5000_ar8327_pad0_cfg,
|
|
.port0_cfg = {
|
|
.force_link = 1,
|
|
.speed = AR8327_PORT_SPEED_1000,
|
|
.duplex = 1,
|
|
.txpause = 1,
|
|
.rxpause = 1,
|
|
},
|
|
.led_cfg = &cr5000_ar8327_led_cfg,
|
|
};
|
|
|
|
static struct mdio_board_info cr5000_mdio0_info[] = {
|
|
{
|
|
.bus_id = "ag71xx-mdio.0",
|
|
.mdio_addr = 0,
|
|
.platform_data = &cr5000_ar8327_data,
|
|
},
|
|
};
|
|
|
|
static void __init cr5000_setup(void)
|
|
{
|
|
u8 *art = (u8 *) KSEG1ADDR(0x1fff0000);
|
|
struct ath9k_platform_data *pdata;
|
|
|
|
ath79_gpio_function_enable(AR934X_GPIO_FUNC_JTAG_DISABLE);
|
|
gpio_request_one(CR5000_GPIO_LED_POWER_ENABLE,
|
|
GPIOF_OUT_INIT_LOW, "Power LED enable");
|
|
ath79_gpio_output_select(CR5000_GPIO_LED_POWER_AMBER, AR934X_GPIO_OUT_GPIO);
|
|
ath79_gpio_output_select(CR5000_GPIO_LED_WLAN_2G, AR934X_GPIO_OUT_GPIO);
|
|
ath79_gpio_output_select(CR5000_GPIO_LED_WPS, AR934X_GPIO_OUT_GPIO);
|
|
|
|
ath79_register_m25p80(NULL);
|
|
|
|
ath79_register_leds_gpio(-1, ARRAY_SIZE(cr5000_leds_gpio),
|
|
cr5000_leds_gpio);
|
|
ath79_register_gpio_keys_polled(-1, CR5000_KEYS_POLL_INTERVAL,
|
|
ARRAY_SIZE(cr5000_gpio_keys),
|
|
cr5000_gpio_keys);
|
|
ath79_register_usb();
|
|
ath79_register_wmac(art + CR5000_WMAC_CALDATA_OFFSET, art + CR5000_WMAC_MAC_OFFSET);
|
|
ap91_pci_init(NULL, art + CR5000_PCIE_WMAC_OFFSET);
|
|
pdata = ap9x_pci_get_wmac_data(0);
|
|
if (pdata)
|
|
pdata->use_eeprom = true;
|
|
|
|
ath79_setup_ar934x_eth_cfg(AR934X_ETH_CFG_RGMII_GMAC0);
|
|
ath79_register_mdio(0, 0x0);
|
|
|
|
ath79_init_mac(ath79_eth0_data.mac_addr, art + CR5000_MAC0_OFFSET, 0);
|
|
|
|
mdiobus_register_board_info(cr5000_mdio0_info,
|
|
ARRAY_SIZE(cr5000_mdio0_info));
|
|
|
|
/* GMAC0 is connected to an AR8327 switch */
|
|
ath79_eth0_data.phy_if_mode = PHY_INTERFACE_MODE_RGMII;
|
|
ath79_eth0_data.phy_mask = BIT(0);
|
|
ath79_eth0_data.mii_bus_dev = &ath79_mdio0_device.dev;
|
|
ath79_eth0_pll_data.pll_1000 = 0x06000000;
|
|
ath79_register_eth(0);
|
|
}
|
|
|
|
MIPS_MACHINE(ATH79_MACH_CR5000, "CR5000", "PowerCloud Systems CR5000",
|
|
cr5000_setup);
|