mirror of
https://github.com/openwrt/openwrt.git
synced 2024-12-19 21:58:04 +00:00
f2b7d9dc1c
The following adds the Aerohive HiveAP-330 Access Point to LEDE under
the mpc85xx/p1020 subtarget.
Hardware:
- SoC: Freescale P1020NSE2DFB
- NAND: Intel JS28F512M29EWH 64MB
- Memory: 2x ProMOS V59C1G01168QBJ3 128MB (Total of 256MB)
- 2.4GHz WiFi: Atheros AR9390-AL1A
- 5.0GHz WiFi: Atheros AR9390-AL1A
- Eth1: Atheros AR8035-A PoE
- Eth2: Atheros AR8035-A
- TPM: Atmel AT97SC3204
- LED Driver: TI LP5521
Flashing:
1. Hook into UART (9600 baud) and enter U-Boot. You may need to enter a
password of administrator or AhNf?d@ta06 if prompted.
2. Once in U-Boot, tftp boot the initramfs image:
dhcp;
tftpboot 0x1000000 192.168.1.101:lede-
mpc85xx-p1020-hiveap-330-initramfs.zImage;
tftpboot 0x6000000 192.168.1.101:lede-mpc85xx-p1020-hiveap-330.fdt;
bootm 0x1000000 - 0x6000000;
3. Once booted, scp over the sysupgrade file and sysupgrade the device
to flash LEDE to the NAND.
sysupgrade /tmp/lede-mpc85xx-p1020-hiveap-330-sysupgrade.img
Signed-off-by: Chris Blake <chrisrblake93@gmail.com>
34 lines
623 B
Bash
Executable File
34 lines
623 B
Bash
Executable File
#!/bin/sh
|
|
#
|
|
# Copyright (C) 2013 OpenWrt.org
|
|
#
|
|
|
|
MPC85XX_BOARD_NAME=
|
|
MPC85XX_MODEL=
|
|
|
|
mpc85xx_board_detect() {
|
|
local model
|
|
local name
|
|
|
|
model=$(awk 'BEGIN{FS="[ \t]+:[ \t]"} /model/ {print $2}' /proc/cpuinfo)
|
|
|
|
case "$model" in
|
|
*"HiveAP-330")
|
|
name="hiveap-330"
|
|
;;
|
|
*"TL-WDR4900 v1")
|
|
name="tl-wdr4900-v1"
|
|
;;
|
|
esac
|
|
|
|
[ -z "$name" ] && name="unknown"
|
|
|
|
[ -z "$MPC85XX_BOARD_NAME" ] && MPC85XX_BOARD_NAME="$name"
|
|
[ -z "$MPC85XX_MODEL" ] && MPC85XX_MODEL="$model"
|
|
|
|
[ -e "/tmp/sysinfo/" ] || mkdir -p "/tmp/sysinfo/"
|
|
|
|
echo "$MPC85XX_BOARD_NAME" > /tmp/sysinfo/board_name
|
|
echo "$MPC85XX_MODEL" > /tmp/sysinfo/model
|
|
}
|