mirror of
https://github.com/openwrt/openwrt.git
synced 2024-12-30 02:29:01 +00:00
d4c999bb89
backport from wireless-drivers-next, replacing some existing patches in our tree (marked with '=' are those which were already present): f483039cf51a rt2x00: use simple_read_from_buffer() =5c656c71b1bf rt2800: move usb specific txdone/txstatus routines to rt2800lib =0b0d556e0ebb rt2800mmio: use txdone/txstatus routines from lib =5022efb50f62 rt2x00: do not check for txstatus timeout every time on tasklet =adf26a356f13 rt2x00: use different txstatus timeouts when flushing =0240564430c0 rt2800: flush and txstatus rework for rt2800mmio 6eba8fd22352 rt2x00: rt2400pci: mark expected switch fall-through 10bb92217747 rt2x00: rt2500pci: mark expected switch fall-through 916e6bbcfcff rt2x00: rt2800lib: mark expected switch fall-throughs 641dd8068ecb rt2x00: rt61pci: mark expected switch fall-through 750afb08ca71 cross-tree: phase out dma_zalloc_coherent() =c2e28ef7711f rt2x00: reduce tx power to nominal level on RT6352 a4296994eb80 rt2x00: Work around a firmware bug with shared keys 2587791d5758 rt2x00: no need to check return value of debugfs_create functions pending on linux-wireless: rt2x00: remove unneeded check rt2x00: remove confusing AGC register rt2800: enable TX_PIN_CFG_LNA_PE_ bits per band rt2800: enable TX_PIN_CFG_RFRX_EN only for MT7620 rt2800: comment and simplify AGC init for RT6352 rt2x00: do not print error when queue is full rt2800: partially restore old mmio txstatus behaviour rt2800: new flush implementation for SoC devices rt2800: move txstatus pending routine rt2800mmio: fetch tx status changes rt2800mmio: use timer and work for handling tx statuses timeouts rt2x00: remove last_nostatus_check rt2x00: remove not used entry field rt2x00mmio: remove legacy comment While at it also rename some existing patches now that there are separate folders with patches for each driver to make things a bit nicer to handle. Signed-off-by: Daniel Golle <daniel@makrotopia.org>
144 lines
4.8 KiB
Diff
144 lines
4.8 KiB
Diff
From a4296994eb8061ee3455721a296c387c639bf635 Mon Sep 17 00:00:00 2001
|
|
From: Bernd Edlinger <bernd.edlinger@hotmail.de>
|
|
Date: Tue, 15 Jan 2019 14:01:29 +0000
|
|
Subject: [PATCH 13/28] rt2x00: Work around a firmware bug with shared keys
|
|
|
|
Apparently the rt2x61 firmware fails temporarily to decode
|
|
broadcast packets if the shared keys are not assigned
|
|
in the "correct" sequence. At the same time unicast
|
|
packets work fine, since they are encrypted with the
|
|
pairwise key.
|
|
|
|
At least with WPA2 CCMP mode the shared keys are
|
|
set in the following sequence: keyidx=1, 2, 1, 2.
|
|
After a while only keyidx 2 gets decrypted, and
|
|
keyidx 1 is ignored, probably because there is never
|
|
a keyidx 3.
|
|
|
|
Symptoms are arping -b works for 10 minutes, since
|
|
keyidx=2 is used for broadcast, and then it stops
|
|
working for 10 minutes, because keyidx=1 is used.
|
|
That failure mode repeats forever.
|
|
|
|
Note, the firmware does not even know which keyidx
|
|
corresponds to which hw_key_idx so the firmware is
|
|
trying to be smarter than the driver, which is bound
|
|
to fail.
|
|
|
|
As workaround the function rt61pci_config_shared_key
|
|
requests software decryption of the shared keys,
|
|
by returning EOPNOTSUPP. However, pairwise keys are
|
|
still handled by hardware which works just fine.
|
|
|
|
Signed-off-by: Bernd Edlinger <bernd.edlinger@hotmail.de>
|
|
Acked-by: Stanislaw Gruszka <sgruszka@redhat.com>
|
|
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
|
|
---
|
|
drivers/net/wireless/ralink/rt2x00/rt61pci.c | 93 +-------------------
|
|
1 file changed, 4 insertions(+), 89 deletions(-)
|
|
|
|
--- a/drivers/net/wireless/ralink/rt2x00/rt61pci.c
|
|
+++ b/drivers/net/wireless/ralink/rt2x00/rt61pci.c
|
|
@@ -321,97 +321,12 @@ static int rt61pci_config_shared_key(str
|
|
struct rt2x00lib_crypto *crypto,
|
|
struct ieee80211_key_conf *key)
|
|
{
|
|
- struct hw_key_entry key_entry;
|
|
- struct rt2x00_field32 field;
|
|
- u32 mask;
|
|
- u32 reg;
|
|
-
|
|
- if (crypto->cmd == SET_KEY) {
|
|
- /*
|
|
- * rt2x00lib can't determine the correct free
|
|
- * key_idx for shared keys. We have 1 register
|
|
- * with key valid bits. The goal is simple, read
|
|
- * the register, if that is full we have no slots
|
|
- * left.
|
|
- * Note that each BSS is allowed to have up to 4
|
|
- * shared keys, so put a mask over the allowed
|
|
- * entries.
|
|
- */
|
|
- mask = (0xf << crypto->bssidx);
|
|
-
|
|
- reg = rt2x00mmio_register_read(rt2x00dev, SEC_CSR0);
|
|
- reg &= mask;
|
|
-
|
|
- if (reg && reg == mask)
|
|
- return -ENOSPC;
|
|
-
|
|
- key->hw_key_idx += reg ? ffz(reg) : 0;
|
|
-
|
|
- /*
|
|
- * Upload key to hardware
|
|
- */
|
|
- memcpy(key_entry.key, crypto->key,
|
|
- sizeof(key_entry.key));
|
|
- memcpy(key_entry.tx_mic, crypto->tx_mic,
|
|
- sizeof(key_entry.tx_mic));
|
|
- memcpy(key_entry.rx_mic, crypto->rx_mic,
|
|
- sizeof(key_entry.rx_mic));
|
|
-
|
|
- reg = SHARED_KEY_ENTRY(key->hw_key_idx);
|
|
- rt2x00mmio_register_multiwrite(rt2x00dev, reg,
|
|
- &key_entry, sizeof(key_entry));
|
|
-
|
|
- /*
|
|
- * The cipher types are stored over 2 registers.
|
|
- * bssidx 0 and 1 keys are stored in SEC_CSR1 and
|
|
- * bssidx 1 and 2 keys are stored in SEC_CSR5.
|
|
- * Using the correct defines correctly will cause overhead,
|
|
- * so just calculate the correct offset.
|
|
- */
|
|
- if (key->hw_key_idx < 8) {
|
|
- field.bit_offset = (3 * key->hw_key_idx);
|
|
- field.bit_mask = 0x7 << field.bit_offset;
|
|
-
|
|
- reg = rt2x00mmio_register_read(rt2x00dev, SEC_CSR1);
|
|
- rt2x00_set_field32(®, field, crypto->cipher);
|
|
- rt2x00mmio_register_write(rt2x00dev, SEC_CSR1, reg);
|
|
- } else {
|
|
- field.bit_offset = (3 * (key->hw_key_idx - 8));
|
|
- field.bit_mask = 0x7 << field.bit_offset;
|
|
-
|
|
- reg = rt2x00mmio_register_read(rt2x00dev, SEC_CSR5);
|
|
- rt2x00_set_field32(®, field, crypto->cipher);
|
|
- rt2x00mmio_register_write(rt2x00dev, SEC_CSR5, reg);
|
|
- }
|
|
-
|
|
- /*
|
|
- * The driver does not support the IV/EIV generation
|
|
- * in hardware. However it doesn't support the IV/EIV
|
|
- * inside the ieee80211 frame either, but requires it
|
|
- * to be provided separately for the descriptor.
|
|
- * rt2x00lib will cut the IV/EIV data out of all frames
|
|
- * given to us by mac80211, but we must tell mac80211
|
|
- * to generate the IV/EIV data.
|
|
- */
|
|
- key->flags |= IEEE80211_KEY_FLAG_GENERATE_IV;
|
|
- }
|
|
-
|
|
/*
|
|
- * SEC_CSR0 contains only single-bit fields to indicate
|
|
- * a particular key is valid. Because using the FIELD32()
|
|
- * defines directly will cause a lot of overhead, we use
|
|
- * a calculation to determine the correct bit directly.
|
|
+ * Let the software handle the shared keys,
|
|
+ * since the hardware decryption does not work reliably,
|
|
+ * because the firmware does not know the key's keyidx.
|
|
*/
|
|
- mask = 1 << key->hw_key_idx;
|
|
-
|
|
- reg = rt2x00mmio_register_read(rt2x00dev, SEC_CSR0);
|
|
- if (crypto->cmd == SET_KEY)
|
|
- reg |= mask;
|
|
- else if (crypto->cmd == DISABLE_KEY)
|
|
- reg &= ~mask;
|
|
- rt2x00mmio_register_write(rt2x00dev, SEC_CSR0, reg);
|
|
-
|
|
- return 0;
|
|
+ return -EOPNOTSUPP;
|
|
}
|
|
|
|
static int rt61pci_config_pairwise_key(struct rt2x00_dev *rt2x00dev,
|