ExternalVendorCode/openwrt
1
0
Fork 0
mirror of https://github.com/openwrt/openwrt.git synced 2025-02-02 09:18:05 +00:00
Code Issues Actions 3 Packages Projects Releases Wiki Activity
openwrt/target/linux
History
Mark Mentovai 934e843da3 ipq806x: ubnt,unifi-ac-hd: use on-board PHYs 
Unlike many ipq806x devices, Ubiquiti UniFi AC HD (UAP-AC-HD, UAP301)
has no switch on board. Its two Ethernet ports are connected to Atheros
AR8033 PHYs. It is not appropriate to use fixed-link in this
configuration. Instead, configure the correct PHYs in the device tree
configuration to allow the at803x driver to load.

Signed-off-by: Mark Mentovai <mark@moxienet.com>
Build-tested: ipq806x/ubnt,unifi-ac-hd
Run-tested: ipq806x/ubnt,unifi-ac-hd
Signed-off-by: maurerr <mariusd84@gmail.com>
2021-09-01 08:08:03 +00:00
..
apm821xx
apm821xx: MBL: correct phy-mode delay settings
2021-09-01 08:08:02 +00:00
arc770
treewide: switch the timer frequency to 100 Hz
2021-09-01 08:08:01 +00:00
archs38
treewide: switch the timer frequency to 100 Hz
2021-09-01 08:08:01 +00:00
armvirt
treewide: switch the timer frequency to 100 Hz
2021-09-01 08:08:01 +00:00
at91
treewide: switch the timer frequency to 100 Hz
2021-09-01 08:08:01 +00:00
ath25
kernel: Activate FORTIFY_SOURCE for MIPS kernel 5.4
2021-09-01 08:08:02 +00:00
ath79
ath79: Deactivate ZyXEL NBG6716 by default
2021-09-01 08:08:03 +00:00
bcm27xx
kernel: bump 5.4 to 5.4.115
2021-09-01 08:08:02 +00:00
bcm47xx
bcm47xx: make WGT634U NVRAM patch apply again
2021-09-01 08:07:47 +00:00
bcm53xx
treewide: switch the timer frequency to 100 Hz
2021-09-01 08:08:01 +00:00
bcm63xx
kernel: Activate FORTIFY_SOURCE for MIPS kernel 5.4
2021-09-01 08:08:02 +00:00
bcm4908
treewide: switch the timer frequency to 100 Hz
2021-09-01 08:08:01 +00:00
bmips
treewide: switch the timer frequency to 100 Hz
2021-09-01 08:08:01 +00:00
gemini
treewide: switch the timer frequency to 100 Hz
2021-09-01 08:08:01 +00:00
generic
kernel: fix parsing fixed subpartitions
2021-09-01 08:08:03 +00:00
imx6
treewide: switch the timer frequency to 100 Hz
2021-09-01 08:08:01 +00:00
ipq40xx
kernel: bump 5.4 to 5.4.114
2021-09-01 08:08:02 +00:00
ipq806x
ipq806x: ubnt,unifi-ac-hd: use on-board PHYs
2021-09-01 08:08:03 +00:00
ipq807x
treewide: remove redundant ubifs kconfig symbols
2021-09-01 08:08:01 +00:00
kirkwood
kernel: fix parsing fixed subpartitions
2021-09-01 08:08:03 +00:00
lantiq
kernel: fix parsing fixed subpartitions
2021-09-01 08:08:03 +00:00
layerscape
kernel: bump 5.4 to 5.4.114
2021-09-01 08:08:02 +00:00
malta
treewide: switch the timer frequency to 100 Hz
2021-09-01 08:08:01 +00:00
mediatek
mediatek: bpi-r64: add eMMC bootloader artifacts
2021-09-01 08:08:03 +00:00
mpc85xx
treewide: switch the timer frequency to 100 Hz
2021-09-01 08:08:01 +00:00
mvebu
kernel: fix parsing fixed subpartitions
2021-09-01 08:08:03 +00:00
mxs
treewide: switch the timer frequency to 100 Hz
2021-09-01 08:08:01 +00:00
octeon
treewide: switch the timer frequency to 100 Hz
2021-09-01 08:08:01 +00:00
octeontx
treewide: switch the timer frequency to 100 Hz
2021-09-01 08:08:01 +00:00
omap
treewide: remove redundant ubifs kconfig symbols
2021-09-01 08:08:01 +00:00
oxnas
treewide: remove redundant ubifs kconfig symbols
2021-09-01 08:08:01 +00:00
pistachio
treewide: switch the timer frequency to 100 Hz
2021-09-01 08:08:01 +00:00
ramips
kernel: Activate FORTIFY_SOURCE for MIPS kernel 5.4
2021-09-01 08:08:02 +00:00
realtek
treewide: switch the timer frequency to 100 Hz
2021-09-01 08:08:01 +00:00
rockchip
treewide: switch the timer frequency to 100 Hz
2021-09-01 08:08:01 +00:00
sunxi
kernel: bump 5.4 to 5.4.112
2021-09-01 08:08:00 +00:00
tegra
kernel: Move CONFIG_USERIO to generic config
2021-09-01 08:07:53 +00:00
uml
treewide: switch the timer frequency to 100 Hz
2021-09-01 08:08:01 +00:00
x86
treewide: switch the timer frequency to 100 Hz
2021-09-01 08:08:01 +00:00
zynq
kernel: Move CONFIG_USERIO to generic config
2021-09-01 08:07:53 +00:00
Makefile
target: use SPDX license identifiers on Makefiles
2021-09-01 08:07:34 +00:00