mirror of
https://github.com/openwrt/openwrt.git
synced 2024-12-29 18:19:02 +00:00
2d63d42f5e
Initial conversion to new LED color/function format and drop label format where possible. The same label is composed at runtime. Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
436 lines
8.2 KiB
Plaintext
436 lines
8.2 KiB
Plaintext
// SPDX-License-Identifier: (GPL-2.0 OR MIT)
|
|
/*
|
|
* Copyright (C) 2021 MediaTek Inc.
|
|
* Author: Sam.Shih <sam.shih@mediatek.com>
|
|
*/
|
|
|
|
#include "mt7986a.dtsi"
|
|
#include <dt-bindings/gpio/gpio.h>
|
|
#include <dt-bindings/input/input.h>
|
|
#include <dt-bindings/leds/common.h>
|
|
|
|
/ {
|
|
aliases {
|
|
serial0 = &uart0;
|
|
label-mac-device = &gmac0;
|
|
led-boot = &led_status_green;
|
|
led-failsafe = &led_status_red;
|
|
led-running = &led_status_green;
|
|
led-upgrade = &led_status_red;
|
|
};
|
|
|
|
chosen {
|
|
stdout-path = "serial0:115200n8";
|
|
};
|
|
|
|
memory {
|
|
reg = <0 0x40000000 0 0x40000000>;
|
|
};
|
|
|
|
reg_1p8v: regulator-1p8v {
|
|
compatible = "regulator-fixed";
|
|
regulator-name = "fixed-1.8V";
|
|
regulator-min-microvolt = <1800000>;
|
|
regulator-max-microvolt = <1800000>;
|
|
regulator-boot-on;
|
|
regulator-always-on;
|
|
};
|
|
|
|
reg_3p3v: regulator-3p3v {
|
|
compatible = "regulator-fixed";
|
|
regulator-name = "fixed-3.3V";
|
|
regulator-min-microvolt = <3300000>;
|
|
regulator-max-microvolt = <3300000>;
|
|
regulator-boot-on;
|
|
regulator-always-on;
|
|
};
|
|
|
|
reg_5v: regulator-5v {
|
|
compatible = "regulator-fixed";
|
|
regulator-name = "fixed-5V";
|
|
regulator-min-microvolt = <5000000>;
|
|
regulator-max-microvolt = <5000000>;
|
|
regulator-boot-on;
|
|
regulator-always-on;
|
|
};
|
|
|
|
gpio-keys {
|
|
compatible = "gpio-keys";
|
|
poll-interval = <20>;
|
|
|
|
reset-button {
|
|
label = "reset";
|
|
gpios = <&pio 21 GPIO_ACTIVE_LOW>;
|
|
linux,code = <KEY_RESTART>;
|
|
};
|
|
|
|
wlan-button {
|
|
label = "wlan";
|
|
gpios = <&pio 11 GPIO_ACTIVE_LOW>;
|
|
linux,code = <KEY_WLAN>;
|
|
};
|
|
wps-button {
|
|
label = "wps";
|
|
gpios = <&pio 56 GPIO_ACTIVE_LOW>;
|
|
linux,code = <KEY_WPS_BUTTON>;
|
|
};
|
|
};
|
|
|
|
leds {
|
|
compatible = "gpio-leds";
|
|
|
|
led_green_wifi24g {
|
|
label = "green:wifi24g";
|
|
gpios = <&pio 1 GPIO_ACTIVE_LOW>;
|
|
default-state = "off";
|
|
};
|
|
|
|
led_green_wifi5g {
|
|
label = "green:wifi5g";
|
|
gpios = <&pio 2 GPIO_ACTIVE_LOW>;
|
|
default-state = "off";
|
|
};
|
|
|
|
led_green_inet {
|
|
label = "green:inet";
|
|
gpios = <&pio 14 GPIO_ACTIVE_LOW>;
|
|
default-state = "off";
|
|
};
|
|
|
|
led_red_inet {
|
|
label = "red:inet";
|
|
gpios = <&pio 15 GPIO_ACTIVE_LOW>;
|
|
default-state = "off";
|
|
};
|
|
|
|
led_status_green: led_green_pwr {
|
|
label = "green:pwr";
|
|
gpios = <&pio 13 GPIO_ACTIVE_LOW>;
|
|
linux,default-trigger = "timer"; /* Default blinking */
|
|
led-pattern = <125 125>; /* Fast blink is 4 HZ */
|
|
};
|
|
|
|
led_status_red: led_red_pwr {
|
|
label = "red:pwr";
|
|
gpios = <&pio 12 GPIO_ACTIVE_LOW>;
|
|
default-state = "off";
|
|
};
|
|
|
|
led_green_fxs {
|
|
label = "green:fxs";
|
|
gpios = <&pio 16 GPIO_ACTIVE_HIGH>;
|
|
default-state = "off";
|
|
};
|
|
|
|
led_amber_fxs {
|
|
label = "amber:fxs";
|
|
gpios = <&pio 17 GPIO_ACTIVE_HIGH>;
|
|
default-state = "off";
|
|
};
|
|
|
|
led_amber_wps24g {
|
|
label = "amber:wps24g";
|
|
gpios = <&pio 18 GPIO_ACTIVE_HIGH>;
|
|
default-state = "off";
|
|
};
|
|
|
|
led_amber_wps5g {
|
|
label = "amber:wps5g";
|
|
gpios = <&pio 19 GPIO_ACTIVE_HIGH>;
|
|
default-state = "off";
|
|
};
|
|
|
|
led_green_lan {
|
|
function = LED_FUNCTION_LAN;
|
|
color = <LED_COLOR_ID_GREEN>;
|
|
gpios = <&pio 20 GPIO_ACTIVE_HIGH>;
|
|
default-state = "off";
|
|
};
|
|
|
|
led_green_sfp {
|
|
label = "green:sfp";
|
|
gpios = <&pio 24 GPIO_ACTIVE_HIGH>;
|
|
default-state = "off";
|
|
};
|
|
};
|
|
};
|
|
|
|
&spi0 {
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&spi_flash_pins>;
|
|
cs-gpios = <0>, <0>;
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
status = "okay";
|
|
|
|
spi_nand: spi_nand@0 {
|
|
#address-cells = <1>;
|
|
#size-cells = <1>;
|
|
compatible = "spi-nand";
|
|
reg = <1>;
|
|
spi-max-frequency = <10000000>;
|
|
spi-tx-bus-width = <4>;
|
|
spi-rx-bus-width = <4>;
|
|
|
|
nand_partitions: partitions {
|
|
compatible = "fixed-partitions";
|
|
#address-cells = <1>;
|
|
#size-cells = <1>;
|
|
};
|
|
};
|
|
};
|
|
|
|
ð {
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <ð_pins>;
|
|
status = "okay";
|
|
|
|
gmac0: mac@0 {
|
|
compatible = "mediatek,eth-mac";
|
|
reg = <0>;
|
|
phy-mode = "2500base-x";
|
|
|
|
fixed-link {
|
|
speed = <2500>;
|
|
full-duplex;
|
|
pause;
|
|
};
|
|
};
|
|
|
|
gmac1: mac@1 {
|
|
compatible = "mediatek,eth-mac";
|
|
reg = <1>;
|
|
phy-mode = "2500base-x";
|
|
phy = <&phy6>;
|
|
};
|
|
|
|
mdio: mdio-bus {
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
reset-gpios = <&pio 6 GPIO_ACTIVE_LOW>;
|
|
reset-delay-us = <1500000>;
|
|
reset-post-delay-us = <1000000>;
|
|
|
|
phy5: phy@5 {
|
|
compatible = "ethernet-phy-ieee802.3-c45";
|
|
reg = <5>;
|
|
mxl,led-config = <0x03f0 0x0 0x0 0x0>;
|
|
};
|
|
|
|
phy6: phy@6 {
|
|
compatible = "ethernet-phy-ieee802.3-c45";
|
|
reg = <6>;
|
|
mxl,led-config = <0x00f0 0x0 0x0 0x0>;
|
|
};
|
|
|
|
switch@1f {
|
|
compatible = "mediatek,mt7531";
|
|
reg = <31>;
|
|
reset-gpios = <&pio 5 GPIO_ACTIVE_HIGH>;
|
|
|
|
ports {
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
|
|
port@1 {
|
|
reg = <1>;
|
|
label = "lan2";
|
|
};
|
|
|
|
port@2 {
|
|
reg = <2>;
|
|
label = "lan3";
|
|
};
|
|
|
|
port@3 {
|
|
reg = <3>;
|
|
label = "lan4";
|
|
};
|
|
|
|
port@5 {
|
|
reg = <5>;
|
|
label = "lan1";
|
|
phy-mode = "2500base-x";
|
|
phy = <&phy5>;
|
|
};
|
|
|
|
port@6 {
|
|
reg = <6>;
|
|
ethernet = <&gmac0>;
|
|
phy-mode = "2500base-x";
|
|
|
|
fixed-link {
|
|
speed = <2500>;
|
|
full-duplex;
|
|
pause;
|
|
};
|
|
};
|
|
};
|
|
};
|
|
};
|
|
};
|
|
|
|
&watchdog {
|
|
status = "okay";
|
|
};
|
|
|
|
&wifi {
|
|
status = "okay";
|
|
pinctrl-names = "default", "dbdc";
|
|
pinctrl-0 = <&wf_2g_5g_pins>;
|
|
pinctrl-1 = <&wf_dbdc_pins>;
|
|
};
|
|
|
|
&crypto {
|
|
status = "okay";
|
|
};
|
|
|
|
&pio {
|
|
eth_pins: eth-pins {
|
|
mux {
|
|
function = "eth";
|
|
groups = "switch_int", "mdc_mdio";
|
|
};
|
|
};
|
|
|
|
spic_pins_g2: spic-pins-29-to-32 {
|
|
mux {
|
|
function = "spi";
|
|
groups = "spi1_2";
|
|
};
|
|
};
|
|
|
|
spi_flash_pins: spi-flash-pins-33-to-38 {
|
|
mux {
|
|
function = "spi";
|
|
groups = "spi0", "spi0_wp_hold";
|
|
};
|
|
conf-pu {
|
|
pins = "SPI2_CS", "SPI2_HOLD", "SPI2_WP";
|
|
drive-strength = <8>;
|
|
mediatek,pull-up-adv = <0>; /* bias-disable */
|
|
};
|
|
conf-pd {
|
|
pins = "SPI2_CLK", "SPI2_MOSI", "SPI2_MISO";
|
|
drive-strength = <8>;
|
|
mediatek,pull-down-adv = <0>; /* bias-disable */
|
|
};
|
|
};
|
|
|
|
uart0_pins: uart0-pins {
|
|
mux {
|
|
function = "uart";
|
|
groups = "uart0";
|
|
};
|
|
};
|
|
|
|
uart1_pins: uart1-pins {
|
|
mux {
|
|
function = "uart";
|
|
groups = "uart1";
|
|
};
|
|
};
|
|
|
|
uart2_pins: uart2-pins {
|
|
mux {
|
|
function = "uart";
|
|
groups = "uart2";
|
|
};
|
|
};
|
|
|
|
wf_2g_5g_pins: wf_2g_5g-pins {
|
|
mux {
|
|
function = "wifi";
|
|
groups = "wf_2g", "wf_5g";
|
|
};
|
|
conf {
|
|
pins = "WF0_HB1", "WF0_HB2", "WF0_HB3", "WF0_HB4",
|
|
"WF0_HB0", "WF0_HB0_B", "WF0_HB5", "WF0_HB6",
|
|
"WF0_HB7", "WF0_HB8", "WF0_HB9", "WF0_HB10",
|
|
"WF0_TOP_CLK", "WF0_TOP_DATA", "WF1_HB1",
|
|
"WF1_HB2", "WF1_HB3", "WF1_HB4", "WF1_HB0",
|
|
"WF1_HB5", "WF1_HB6", "WF1_HB7", "WF1_HB8",
|
|
"WF1_TOP_CLK", "WF1_TOP_DATA";
|
|
drive-strength = <4>;
|
|
};
|
|
};
|
|
|
|
wf_dbdc_pins: wf_dbdc-pins {
|
|
mux {
|
|
function = "wifi";
|
|
groups = "wf_dbdc";
|
|
};
|
|
conf {
|
|
pins = "WF0_HB1", "WF0_HB2", "WF0_HB3", "WF0_HB4",
|
|
"WF0_HB0", "WF0_HB0_B", "WF0_HB5", "WF0_HB6",
|
|
"WF0_HB7", "WF0_HB8", "WF0_HB9", "WF0_HB10",
|
|
"WF0_TOP_CLK", "WF0_TOP_DATA", "WF1_HB1",
|
|
"WF1_HB2", "WF1_HB3", "WF1_HB4", "WF1_HB0",
|
|
"WF1_HB5", "WF1_HB6", "WF1_HB7", "WF1_HB8",
|
|
"WF1_TOP_CLK", "WF1_TOP_DATA";
|
|
drive-strength = <4>;
|
|
};
|
|
};
|
|
|
|
usb-oc-hog {
|
|
gpio-hog;
|
|
gpios = <7 GPIO_ACTIVE_LOW>;
|
|
input;
|
|
line-name = "usb-oc";
|
|
};
|
|
};
|
|
|
|
&spi1 {
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&spic_pins_g2>;
|
|
status = "okay";
|
|
|
|
proslic_spi: proslic_spi@0 {
|
|
compatible = "silabs,proslic_spi";
|
|
reg = <0>;
|
|
spi-max-frequency = <10000000>;
|
|
spi-cpha = <1>;
|
|
spi-cpol = <1>;
|
|
channel_count = <1>;
|
|
debug_level = <4>; /* 1 = TRC, 2 = DBG, 4 = ERR */
|
|
reset_gpio = <&pio 25 GPIO_ACTIVE_HIGH>;
|
|
ig,enable-spi = <1>; /* 1: Enable, 0: Disable */
|
|
};
|
|
};
|
|
|
|
&ssusb {
|
|
vusb33-supply = <®_3p3v>;
|
|
vbus-supply = <®_5v>;
|
|
status = "okay";
|
|
};
|
|
|
|
&trng {
|
|
status = "okay";
|
|
};
|
|
|
|
&uart0 {
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&uart0_pins>;
|
|
status = "okay";
|
|
};
|
|
|
|
&uart1 {
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&uart1_pins>;
|
|
status = "disabled";
|
|
|
|
/* EFR32MG21 Zigbee (BOOT)*/
|
|
};
|
|
|
|
&uart2 {
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&uart2_pins>;
|
|
status = "disabled";
|
|
|
|
/* EFR32MG21 Zigbee */
|
|
};
|
|
|
|
&usb_phy {
|
|
status = "okay";
|
|
};
|