mirror of
https://github.com/openwrt/openwrt.git
synced 2024-12-23 23:42:43 +00:00
3d7cb14211
This commit adds support for Asus RT-AX89X BX revision. WARNING: Only the BX revision boards (So B1, B2 etc) are supported because AX revision boards use IPQ8074 v1 SoC which is unsupported. Specifications: --------------- * CPU: Qualcomm IPQ8074A Quad core Cortex-A53 @ 2.2GHz * RAM: 1024MB * Storage: 256MB SLC NAND (Macronix MX30UF2G18AC) * Ethernet: * 5x 1G RJ45 ports via QCA8337 switch * 3x 1G RJ45 ports via internal switch (QCA8075 PHY) * 1x 10G RJ45 via internal switch (AQR113C PHY) * 1x 10G SFP+ slot via internal switch * WLAN: * 2.4GHz 4x4 * 5GHz 8x8 * 8 external antennas * USB: 2x USB 3.0 Type-A * Buttons: * Power switch * WPS * Reset * Wireless ON/OFF * LED ON/OFF LED-s: * Power * Wi-Fi * WAN * 10G * SFP+ Power: * 19.5V via DC jack Installation instructions: -------------------------- 1. Flash temporary OpenWrt initramfs: * Flash openwrt-qualcommax-ipq807x-asus_rt-ax89x-initramfs-factory.trx via the stock firmware. Administration -> Firmware Upgrade -> Manual Firmware update (Upload) After flashing the device will reboot with OpenWrt initramfs and it can be accesed via any of the LAN ports via SSH with the usual OpenWrt default credentials. 2. Sysupgrade from OpenWrt initramfs: * Copy openwrt-qualcommax-ipq807x-asus_rt-ax89x-squashfs-sysupgrade.bin to /tmp/openwrt-qualcommax-ipq807x-asus_rt-ax89x-squashfs-sysupgrade.bin of the running initramfs image. * Simply sysupgrade -n /tmp/openwrt-qualcommax-ipq807x-asus_rt-ax89x-squashfs-sysupgrade.bin After flashing the device will reboot with OpenWrt initramfs and it can be accesed via any of the LAN ports via SSH with the usual OpenWrt default credentials. Link: https://github.com/openwrt/openwrt/pull/15840 Signed-off-by: Robert Marko <robimarko@gmail.com>
41 lines
1.1 KiB
Plaintext
41 lines
1.1 KiB
Plaintext
CONFIG_ARM_PSCI_CPUIDLE_DOMAIN=y
|
|
CONFIG_DT_IDLE_GENPD=y
|
|
CONFIG_GRO_CELLS=y
|
|
CONFIG_IPQ_GCC_8074=y
|
|
CONFIG_MDIO_BITBANG=y
|
|
CONFIG_MDIO_GPIO=y
|
|
# CONFIG_MFD_HI6421_SPMI is not set
|
|
CONFIG_MFD_SPMI_PMIC=y
|
|
CONFIG_NET_DEVLINK=y
|
|
CONFIG_NET_DSA=y
|
|
CONFIG_NET_DSA_QCA8K=y
|
|
CONFIG_NET_DSA_TAG_QCA=y
|
|
# CONFIG_NVMEM_SPMI_SDAM is not set
|
|
CONFIG_PHYLINK=y
|
|
CONFIG_PINCTRL_IPQ8074=y
|
|
CONFIG_PINCTRL_QCOM_SPMI_PMIC=y
|
|
# CONFIG_PM8916_WATCHDOG is not set
|
|
CONFIG_PM_GENERIC_DOMAINS=y
|
|
CONFIG_PM_GENERIC_DOMAINS_OF=y
|
|
# CONFIG_POWER_RESET_QCOM_PON is not set
|
|
CONFIG_QCA83XX_PHY=y
|
|
CONFIG_QCOM_APM=y
|
|
# CONFIG_QCOM_COINCELL is not set
|
|
CONFIG_QCOM_GDSC=y
|
|
CONFIG_QCOM_SPMI_ADC5=y
|
|
# CONFIG_QCOM_SPMI_RRADC is not set
|
|
CONFIG_QCOM_VADC_COMMON=y
|
|
CONFIG_REGMAP_SPMI=y
|
|
CONFIG_REGULATOR_CPR3=y
|
|
# CONFIG_REGULATOR_CPR3_NPU is not set
|
|
CONFIG_REGULATOR_CPR4_APSS=y
|
|
# CONFIG_REGULATOR_QCOM_LABIBB is not set
|
|
CONFIG_REGULATOR_QCOM_SPMI=y
|
|
# CONFIG_REGULATOR_QCOM_USB_VBUS is not set
|
|
CONFIG_REGULATOR_USERSPACE_CONSUMER=y
|
|
CONFIG_RTC_DRV_PM8XXX=y
|
|
CONFIG_SPMI=y
|
|
# CONFIG_SPMI_HISI3670 is not set
|
|
CONFIG_SPMI_MSM_PMIC_ARB=y
|
|
# CONFIG_SPMI_PMIC_CLKDIV is not set
|