openwrt/target/linux/bcm27xx/patches-5.15/950-0572-drm-vc4-Don-t-try-disabling-SCDC-on-Pi0-3.patch
Petr Štetiar ca5c695a45 kernel: bump 5.15 to 5.15.62
Deleted following upstreamed patches:

 bcm27xx: 950-0006-drm-vc4-hdmi-Fix-HPD-GPIO-detection.patch
 bcm27xx: 950-0420-drm-vc4-Adopt-the-dma-configuration-from-the-HVS-or-.patch
 bcm27xx: 950-0425-drm-vc4-A-present-but-empty-dmas-disables-audio.patch
 bcm27xx: 950-0432-vc4-drm-Avoid-full-hdmi-audio-fifo-writes.patch
 bcm27xx: 950-0433-vc4-drm-vc4_plane-Remove-subpixel-positioning-check.patch
 bcm27xx: 950-0435-drm-vc4-Correct-pixel-order-for-DSI0.patch
 bcm27xx: 950-0436-drm-vc4-Register-dsi0-as-the-correct-vc4-encoder-typ.patch
 bcm27xx: 950-0437-drm-vc4-Fix-dsi0-interrupt-support.patch
 bcm27xx: 950-0438-drm-vc4-Add-correct-stop-condition-to-vc4_dsi_encode.patch
 bcm27xx: 950-0443-drm-vc4-Fix-timings-for-interlaced-modes.patch
 bcm27xx: 950-0445-drm-vc4-Fix-margin-calculations-for-the-right-bottom.patch
 bcm27xx: 950-0475-drm-vc4-Reset-HDMI-MISC_CONTROL-register.patch
 bcm27xx: 950-0476-drm-vc4-Release-workaround-buffer-and-DMA-in-error-p.patch
 bcm27xx: 950-0477-drm-vc4-Correct-DSI-divider-calculations.patch
 bcm27xx: 950-0664-drm-vc4-dsi-Correct-max-divider-to-255-not-7.patch

 bcm53xx: 072-next-ARM_dts_BCM53015-add-mr26.patch

 mediatek: 920-linux-next-dts-mt7622-bpi-r64-fix-wps-button.patch

Manually rebased following patches:

 bcm27xx: 950-0004-drm-vc4-hdmi-Remove-the-DDC-probing-for-status-detec.patch
 bcm27xx: 950-0700-net-phy-lan87xx-Decrease-phy-polling-rate.patch
 bcm27xx: 950-0711-drm-vc4-Rename-bridge-to-out_bridge.patch
 bcm27xx: 950-0713-drm-vc4-Remove-splitting-the-bridge-chain-from-the-d.patch
 bcm27xx: 950-0715-drm-vc4-Convert-vc4_dsi-to-using-a-bridge-instead-of.patch
 bcm27xx: 950-0787-vc4-drm-vc4_plane-Keep-fractional-source-coords-insi.patch
 bcm27xx: 950-0914-mmc-block-Don-t-do-single-sector-reads-during-recove.patch

Runtime tested on turris-omnia and glinet-b1300.

Tested-by: John Audia <therealgraysky@proton.me> [bcm2711/RPi4B, mt7622/RT3200]
Signed-off-by: Petr Štetiar <ynezz@true.cz>
2022-08-23 10:37:04 +02:00

33 lines
1.2 KiB
Diff

From e1ee82fdfdba0b210974cf3ccc0048c5aeb83bc6 Mon Sep 17 00:00:00 2001
From: Dave Stevenson <dave.stevenson@raspberrypi.com>
Date: Tue, 16 Nov 2021 10:34:34 +0000
Subject: [PATCH] drm/vc4: Don't try disabling SCDC on Pi0-3.
The code that set the scdc_enabled flag to ensure it was
disabled at boot time also ran on Pi0-3 where there is no
SCDC support. This lead to a warning in vc4_hdmi_encoder_post_crtc_disable
due to vc4_hdmi_disable_scrambling being called and trying to
read (and write) register HDMI_SCRAMBLER_CTL which doesn't
exist on those platforms.
Only set the flag should the interface be configured to support
more than HDMI 1.4.
Signed-off-by: Dave Stevenson <dave.stevenson@raspberrypi.com>
---
drivers/gpu/drm/vc4/vc4_hdmi.c | 3 ++-
1 file changed, 2 insertions(+), 1 deletion(-)
--- a/drivers/gpu/drm/vc4/vc4_hdmi.c
+++ b/drivers/gpu/drm/vc4/vc4_hdmi.c
@@ -2556,7 +2556,8 @@ static int vc4_hdmi_bind(struct device *
* vc4_hdmi_disable_scrambling() will thus run at boot, make
* sure it's disabled, and avoid any inconsistency.
*/
- vc4_hdmi->scdc_enabled = true;
+ if (variant->max_pixel_clock > HDMI_14_MAX_TMDS_CLK)
+ vc4_hdmi->scdc_enabled = true;
ret = variant->init_resources(vc4_hdmi);
if (ret)