mirror of
https://github.com/openwrt/openwrt.git
synced 2024-12-28 01:28:59 +00:00
14940aee45
Removed upstreamed: target/linux/mvebu/patches-5.4/001-PCI-aardvark-Wait-for-endpoint-to-be-ready-before-tr.patch target/linux/mvebu/patches-5.4/016-PCI-aardvark-Train-link-immediately-after-enabling-t.patch target/linux/mvebu/patches-5.4/017-PCI-aardvark-Improve-link-training.patch target/linux/mvebu/patches-5.4/018-PCI-aardvark-Issue-PERST-via-GPIO.patch target/linux/mvebu/patches-5.4/020-arm64-dts-marvell-armada-37xx-Set-pcie_reset_pin-to-.patch The following patch does not apply to upstream any more and needs some more work to make it work fully again. I am not sure if we are still able to set the UART to a none standard baud rate. target/linux/ath79/patches-5.4/921-serial-core-add-support-for-boot-console-with-arbitr.patch These patches needed manually changes: target/linux/generic/pending-5.4/110-ehci_hcd_ignore_oc.patch target/linux/ipq806x/patches-5.4/0065-arm-override-compiler-flags.patch target/linux/layerscape/patches-5.4/804-crypto-0016-MLKU-114-1-crypto-caam-reduce-page-0-regs-access-to-.patch target/linux/mvebu/patches-5.4/019-PCI-aardvark-Add-PHY-support.patch target/linux/octeontx/patches-5.4/0004-PCI-add-quirk-for-Gateworks-PLX-PEX860x-switch-with-.patch All others updated automatically. Compile-tested on: malta/le, armvirt/64, lantiq/xrx200 Runtime-tested on: malta/le, armvirt/64, lantiq/xrx200 Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
157 lines
4.2 KiB
Diff
157 lines
4.2 KiB
Diff
From a9f1c1d3e410596d0a39fd92562cc48ef960b1b7 Mon Sep 17 00:00:00 2001
|
|
From: Li Yang <leoyang.li@nxp.com>
|
|
Date: Fri, 5 Oct 2018 18:33:49 -0500
|
|
Subject: [PATCH] ARM: dts: accumulated change
|
|
|
|
Signed-off-by: Li Yang <leoyang.li@nxp.com>
|
|
---
|
|
arch/arm/boot/dts/ls1021a-qds.dts | 15 +++++++++++++++
|
|
arch/arm/boot/dts/ls1021a-twr.dts | 15 +++++++++++++++
|
|
arch/arm/boot/dts/ls1021a.dtsi | 29 ++++++++++++++++++++++++-----
|
|
3 files changed, 54 insertions(+), 5 deletions(-)
|
|
|
|
--- a/arch/arm/boot/dts/ls1021a-qds.dts
|
|
+++ b/arch/arm/boot/dts/ls1021a-qds.dts
|
|
@@ -126,6 +126,21 @@
|
|
};
|
|
};
|
|
|
|
+&qspi {
|
|
+ num-cs = <2>;
|
|
+ status = "okay";
|
|
+
|
|
+ qflash0: s25fl128s@0 {
|
|
+ compatible = "spansion,m25p80";
|
|
+ #address-cells = <1>;
|
|
+ #size-cells = <1>;
|
|
+ spi-max-frequency = <20000000>;
|
|
+ reg = <0>;
|
|
+ spi-rx-bus-width = <4>;
|
|
+ spi-tx-bus-width = <4>;
|
|
+ };
|
|
+};
|
|
+
|
|
&enet0 {
|
|
tbi-handle = <&tbi0>;
|
|
phy-handle = <&sgmii_phy1c>;
|
|
--- a/arch/arm/boot/dts/ls1021a-twr.dts
|
|
+++ b/arch/arm/boot/dts/ls1021a-twr.dts
|
|
@@ -144,6 +144,21 @@
|
|
};
|
|
};
|
|
|
|
+&qspi {
|
|
+ num-cs = <2>;
|
|
+ status = "okay";
|
|
+
|
|
+ qflash0: n25q128a13@0 {
|
|
+ compatible = "n25q128a13", "jedec,spi-nor";
|
|
+ #address-cells = <1>;
|
|
+ #size-cells = <1>;
|
|
+ spi-max-frequency = <20000000>;
|
|
+ reg = <0>;
|
|
+ spi-rx-bus-width = <4>;
|
|
+ spi-tx-bus-width = <4>;
|
|
+ };
|
|
+};
|
|
+
|
|
&enet0 {
|
|
tbi-handle = <&tbi0>;
|
|
phy-handle = <&sgmii_phy2>;
|
|
--- a/arch/arm/boot/dts/ls1021a.dtsi
|
|
+++ b/arch/arm/boot/dts/ls1021a.dtsi
|
|
@@ -167,12 +167,13 @@
|
|
ifc: ifc@1530000 {
|
|
compatible = "fsl,ifc", "simple-bus";
|
|
reg = <0x0 0x1530000 0x0 0x10000>;
|
|
+ big-endian;
|
|
interrupts = <GIC_SPI 75 IRQ_TYPE_LEVEL_HIGH>;
|
|
};
|
|
|
|
dcfg: dcfg@1ee0000 {
|
|
compatible = "fsl,ls1021a-dcfg", "syscon";
|
|
- reg = <0x0 0x1ee0000 0x0 0x10000>;
|
|
+ reg = <0x0 0x1ee0000 0x0 0x1000>;
|
|
big-endian;
|
|
};
|
|
|
|
@@ -338,7 +339,7 @@
|
|
};
|
|
|
|
i2c0: i2c@2180000 {
|
|
- compatible = "fsl,vf610-i2c";
|
|
+ compatible = "fsl,vf610-i2c", "fsl,ls1021a-vf610-i2c";
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
reg = <0x0 0x2180000 0x0 0x10000>;
|
|
@@ -347,11 +348,12 @@
|
|
clocks = <&clockgen 4 1>;
|
|
dma-names = "tx", "rx";
|
|
dmas = <&edma0 1 39>, <&edma0 1 38>;
|
|
+ fsl-scl-gpio = <&gpio3 23 0>;
|
|
status = "disabled";
|
|
};
|
|
|
|
i2c1: i2c@2190000 {
|
|
- compatible = "fsl,vf610-i2c";
|
|
+ compatible = "fsl,vf610-i2c", "fsl,ls1021a-vf610-i2c";
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
reg = <0x0 0x2190000 0x0 0x10000>;
|
|
@@ -360,6 +362,7 @@
|
|
clocks = <&clockgen 4 1>;
|
|
dma-names = "tx", "rx";
|
|
dmas = <&edma0 1 37>, <&edma0 1 36>;
|
|
+ fsl-scl-gpio = <&gpio3 23 0>;
|
|
status = "disabled";
|
|
};
|
|
|
|
@@ -546,6 +549,16 @@
|
|
status = "disabled";
|
|
};
|
|
|
|
+ ftm0: ftm0@29d0000 {
|
|
+ compatible = "fsl,ftm-alarm";
|
|
+ reg = <0x0 0x29d0000 0x0 0x10000>,
|
|
+ <0x0 0x1ee2140 0x0 0x4>;
|
|
+ reg-names = "ftm", "FlexTimer1";
|
|
+ interrupts = <GIC_SPI 118 IRQ_TYPE_LEVEL_HIGH>;
|
|
+ big-endian;
|
|
+ status = "okay";
|
|
+ };
|
|
+
|
|
pwm1: pwm@29e0000 {
|
|
compatible = "fsl,vf610-ftm-pwm";
|
|
#pwm-cells = <3>;
|
|
@@ -828,6 +841,8 @@
|
|
dr_mode = "host";
|
|
snps,quirk-frame-length-adjustment = <0x20>;
|
|
snps,dis_rxdet_inp3_quirk;
|
|
+ usb3-lpm-capable;
|
|
+ snps,dis-u1u2-when-u3-quirk;
|
|
snps,incr-burst-type-adjustment = <1>, <4>, <8>, <16>;
|
|
};
|
|
|
|
@@ -836,7 +851,9 @@
|
|
reg = <0x00 0x03400000 0x0 0x00010000 /* controller registers */
|
|
0x40 0x00000000 0x0 0x00002000>; /* configuration space */
|
|
reg-names = "regs", "config";
|
|
- interrupts = <GIC_SPI 177 IRQ_TYPE_LEVEL_HIGH>; /* controller interrupt */
|
|
+ interrupts = <GIC_SPI 181 IRQ_TYPE_LEVEL_HIGH>,
|
|
+ <GIC_SPI 183 IRQ_TYPE_LEVEL_HIGH>; /* aer interrupt */
|
|
+ interrupt-names = "pme", "aer";
|
|
fsl,pcie-scfg = <&scfg 0>;
|
|
#address-cells = <3>;
|
|
#size-cells = <2>;
|
|
@@ -860,7 +877,9 @@
|
|
reg = <0x00 0x03500000 0x0 0x00010000 /* controller registers */
|
|
0x48 0x00000000 0x0 0x00002000>; /* configuration space */
|
|
reg-names = "regs", "config";
|
|
- interrupts = <GIC_SPI 178 IRQ_TYPE_LEVEL_HIGH>;
|
|
+ interrupts = <GIC_SPI 182 IRQ_TYPE_LEVEL_HIGH>,
|
|
+ <GIC_SPI 184 IRQ_TYPE_LEVEL_HIGH>; /* aer interrupt */
|
|
+ interrupt-names = "pme", "aer";
|
|
fsl,pcie-scfg = <&scfg 1>;
|
|
#address-cells = <3>;
|
|
#size-cells = <2>;
|