mirror of
https://github.com/openwrt/openwrt.git
synced 2024-12-22 15:02:32 +00:00
927570f0a3
Add and enable the Realtek Otto WDT peripheral found on these SoCs. Default all devices to use standard (cold) reboot and "soc" resets. Devices that require the PLL value fixup before restarting, should pick the "cpu" or "software" reset mode. These devices also need to provide a custom reboot mode, by adding the reboot argument to the kernel command line: WDT reset mode | kernel reboot mode ----------------+--------------------------------------- soc | reboot=cold (default if not specified) cpu | reboot=warm software | reboot=software Preferrably, these devices should use an alternative restart method like gpio-restart to provide reliable restarts. Note that watchdog restarts are not yet exposed, since the _machine_restart override is still present. Signed-off-by: Sander Vanheule <sander@svanheule.net> Tested-by: Stijn Segers <foss@volatilesystems.org> Tested-by: Paul Fertser <fercerpav@gmail.com> Tested-by: Stijn Tintel <stijn@linux-ipv6.be>
241 lines
4.6 KiB
Plaintext
241 lines
4.6 KiB
Plaintext
// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
|
|
|
|
/dts-v1/;
|
|
|
|
#define STRINGIZE(s) #s
|
|
#define LAN_LABEL(p, s) STRINGIZE(p ## s)
|
|
#define SWITCH_PORT_LABEL(n) LAN_LABEL(lan, n)
|
|
|
|
#define INTERNAL_PHY(n) \
|
|
phy##n: ethernet-phy@##n { \
|
|
reg = <##n>; \
|
|
compatible = "ethernet-phy-ieee802.3-c22"; \
|
|
phy-is-integrated; \
|
|
};
|
|
|
|
#define EXTERNAL_PHY(n) \
|
|
phy##n: ethernet-phy@##n { \
|
|
reg = <##n>; \
|
|
compatible = "ethernet-phy-ieee802.3-c22"; \
|
|
};
|
|
|
|
#define EXTERNAL_SFP_PHY(n) \
|
|
phy##n: ethernet-phy@##n { \
|
|
compatible = "ethernet-phy-ieee802.3-c22"; \
|
|
sfp; \
|
|
media = "fibre"; \
|
|
reg = <##n>; \
|
|
};
|
|
|
|
#define SWITCH_PORT(n, s, m) \
|
|
port@##n { \
|
|
reg = <##n>; \
|
|
label = SWITCH_PORT_LABEL(s) ; \
|
|
phy-handle = <&phy##n>; \
|
|
phy-mode = #m ; \
|
|
};
|
|
|
|
#define SWITCH_SFP_PORT(n, s, m) \
|
|
port@##n { \
|
|
reg = <##n>; \
|
|
label = SWITCH_PORT_LABEL(s) ; \
|
|
phy-handle = <&phy##n>; \
|
|
phy-mode = #m ; \
|
|
fixed-link { \
|
|
speed = <1000>; \
|
|
full-duplex; \
|
|
}; \
|
|
};
|
|
|
|
/ {
|
|
#address-cells = <1>;
|
|
#size-cells = <1>;
|
|
|
|
compatible = "realtek,rtl838x-soc";
|
|
|
|
cpus {
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
frequency = <500000000>;
|
|
|
|
cpu@0 {
|
|
compatible = "mips,mips4KEc";
|
|
reg = <0>;
|
|
};
|
|
};
|
|
|
|
chosen {
|
|
bootargs = "console=ttyS0,115200";
|
|
};
|
|
|
|
lx_clk: lx_clk {
|
|
compatible = "fixed-clock";
|
|
#clock-cells = <0>;
|
|
clock-frequency = <200000000>;
|
|
};
|
|
|
|
cpuintc: cpuintc {
|
|
compatible = "mti,cpu-interrupt-controller";
|
|
#address-cells = <0>;
|
|
#interrupt-cells = <1>;
|
|
interrupt-controller;
|
|
};
|
|
|
|
soc: soc {
|
|
compatible = "simple-bus";
|
|
#address-cells = <1>;
|
|
#size-cells = <1>;
|
|
ranges = <0x0 0x18000000 0x10000>;
|
|
|
|
intc: rtlintc@3000 {
|
|
compatible = "realtek,rtl-intc";
|
|
reg = <0x3000 0x20>;
|
|
#address-cells = <0>;
|
|
#interrupt-cells = <1>;
|
|
interrupt-controller;
|
|
interrupt-map =
|
|
<31 &cpuintc 2>, /* UART0 */
|
|
<30 &cpuintc 1>, /* UART1 */
|
|
<29 &cpuintc 5>, /* TC0 */
|
|
<28 &cpuintc 1>, /* TC1 */
|
|
<27 &cpuintc 1>, /* OCPTO */
|
|
<26 &cpuintc 1>, /* HLXTO */
|
|
<25 &cpuintc 1>, /* SLXTO */
|
|
<24 &cpuintc 4>, /* NIC */
|
|
<23 &cpuintc 4>, /* GPIO_ABCD */
|
|
<22 &cpuintc 4>, /* GPIO_EFGH */
|
|
<21 &cpuintc 4>, /* RTC */
|
|
<20 &cpuintc 3>, /* SWCORE */
|
|
<19 &cpuintc 4>, /* WDT_IP1 */
|
|
<18 &cpuintc 5>; /* WDT_IP2 */
|
|
};
|
|
|
|
spi0: spi@1200 {
|
|
compatible = "realtek,rtl8380-spi";
|
|
reg = <0x1200 0x100>;
|
|
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
};
|
|
|
|
uart0: uart@2000 {
|
|
compatible = "ns16550a";
|
|
reg = <0x2000 0x100>;
|
|
|
|
clocks = <&lx_clk>;
|
|
|
|
interrupt-parent = <&intc>;
|
|
interrupts = <31>;
|
|
|
|
reg-io-width = <1>;
|
|
reg-shift = <2>;
|
|
fifo-size = <1>;
|
|
no-loopback-test;
|
|
};
|
|
|
|
uart1: uart@2100 {
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&enable_uart1>;
|
|
|
|
compatible = "ns16550a";
|
|
reg = <0x2100 0x100>;
|
|
|
|
clocks = <&lx_clk>;
|
|
|
|
interrupt-parent = <&intc>;
|
|
interrupts = <30>;
|
|
|
|
reg-io-width = <1>;
|
|
reg-shift = <2>;
|
|
fifo-size = <1>;
|
|
no-loopback-test;
|
|
|
|
status = "disabled";
|
|
};
|
|
|
|
watchdog0: watchdog@3150 {
|
|
compatible = "realtek,rtl8380-wdt";
|
|
reg = <0x3150 0xc>;
|
|
|
|
realtek,reset-mode = "soc";
|
|
|
|
clocks = <&lx_clk>;
|
|
timeout-sec = <30>;
|
|
|
|
interrupt-parent = <&intc>;
|
|
interrupt-names = "phase1", "phase2";
|
|
interrupts = <19>, <18>;
|
|
};
|
|
|
|
gpio0: gpio-controller@3500 {
|
|
compatible = "realtek,rtl8380-gpio", "realtek,otto-gpio";
|
|
reg = <0x3500 0x20>;
|
|
gpio-controller;
|
|
#gpio-cells = <2>;
|
|
ngpios = <24>;
|
|
interrupt-parent = <&intc>;
|
|
interrupts = <23>;
|
|
};
|
|
};
|
|
|
|
gpio1: rtl8231-gpio {
|
|
compatible = "realtek,rtl8231-gpio";
|
|
#gpio-cells = <2>;
|
|
indirect-access-bus-id = <0>;
|
|
gpio-controller;
|
|
|
|
status = "disabled";
|
|
};
|
|
|
|
pinmux: pinmux@1b001000 {
|
|
compatible = "pinctrl-single";
|
|
reg = <0x1b001000 0x4>;
|
|
|
|
pinctrl-single,bit-per-mux;
|
|
pinctrl-single,register-width = <32>;
|
|
pinctrl-single,function-mask = <0x1>;
|
|
#pinctrl-cells = <2>;
|
|
|
|
enable_uart1: pinmux_enable_uart1 {
|
|
pinctrl-single,bits = <0x0 0x10 0x10>;
|
|
};
|
|
};
|
|
|
|
/* LED_GLB_CTRL */
|
|
pinmux_led: pinmux@1b00a000 {
|
|
compatible = "pinctrl-single";
|
|
reg = <0x1b00a000 0x4>;
|
|
|
|
pinctrl-single,bit-per-mux;
|
|
pinctrl-single,register-width = <32>;
|
|
pinctrl-single,function-mask = <0x1>;
|
|
#pinctrl-cells = <2>;
|
|
|
|
/* enable GPIO 0 */
|
|
pinmux_disable_sys_led: disable_sys_led {
|
|
pinctrl-single,bits = <0x0 0x0 0x8000>;
|
|
};
|
|
};
|
|
|
|
ethernet0: ethernet@1b00a300 {
|
|
compatible = "realtek,rtl838x-eth";
|
|
reg = <0x1b00a300 0x100>;
|
|
interrupt-parent = <&intc>;
|
|
interrupts = <24>;
|
|
#interrupt-cells = <1>;
|
|
phy-mode = "internal";
|
|
|
|
fixed-link {
|
|
speed = <1000>;
|
|
full-duplex;
|
|
};
|
|
};
|
|
|
|
switch0: switch@1b000000 {
|
|
compatible = "realtek,rtl83xx-switch";
|
|
|
|
interrupt-parent = <&intc>;
|
|
interrupts = <20>;
|
|
};
|
|
};
|