openwrt/target/linux/mvebu/patches-5.4/553-arm64-dts-marvell-armada-37xx-Move-PCIe-comphy-handl.patch
Pali Rohár 925e43ceb1 mvebu: armada-37xx: Backport PCI aardvark patches
This commit contains patches for PCI aardvark driver and relevant DTS
changes for Turris MOX and EspressoBin backported from mainline kernel.
It fixes support for old ATF, various wifi cards, mainly Compex WLE900VX.

Signed-off-by: Pali Rohár <pali@kernel.org>
Signed-off-by: maurerr <mariusd84@gmail.com>
2021-09-01 08:07:04 +00:00

58 lines
2.0 KiB
Diff

From df749cdb015011e9ed8b60ebb84b4e76a9f35735 Mon Sep 17 00:00:00 2001
From: =?UTF-8?q?Marek=20Beh=C3=BAn?= <marek.behun@nic.cz>
Date: Thu, 30 Apr 2020 10:06:24 +0200
Subject: [PATCH] arm64: dts: marvell: armada-37xx: Move PCIe comphy handle
property
MIME-Version: 1.0
Content-Type: text/plain; charset=UTF-8
Content-Transfer-Encoding: 8bit
Move the comphy handle property of the PCIe node from board specific
device tree files (EspressoBin and Turris Mox) to the generic
armada-37xx.dtsi.
This is correct since this is the only possible PCIe PHY configuration
on Armada 37xx, so when PCIe is enabled on any board, this handle is
correct.
Signed-off-by: Marek Behún <marek.behun@nic.cz>
Tested-by: Tomasz Maciej Nowak <tmn505@gmail.com>
Acked-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Signed-off-by: Gregory CLEMENT <gregory.clement@bootlin.com>
---
arch/arm64/boot/dts/marvell/armada-3720-espressobin.dtsi | 1 -
arch/arm64/boot/dts/marvell/armada-3720-turris-mox.dts | 1 -
arch/arm64/boot/dts/marvell/armada-37xx.dtsi | 1 +
3 files changed, 1 insertion(+), 2 deletions(-)
--- a/arch/arm64/boot/dts/marvell/armada-3720-espressobin.dts
+++ b/arch/arm64/boot/dts/marvell/armada-3720-espressobin.dts
@@ -52,7 +52,6 @@
/* J9 */
&pcie0 {
status = "okay";
- phys = <&comphy1 0>;
pinctrl-names = "default";
pinctrl-0 = <&pcie_reset_pins &pcie_clkreq_pins>;
reset-gpios = <&gpiosb 3 GPIO_ACTIVE_LOW>;
--- a/arch/arm64/boot/dts/marvell/armada-3720-turris-mox.dts
+++ b/arch/arm64/boot/dts/marvell/armada-3720-turris-mox.dts
@@ -126,7 +126,6 @@
status = "okay";
max-link-speed = <2>;
reset-gpios = <&gpiosb 3 GPIO_ACTIVE_LOW>;
- phys = <&comphy1 0>;
/* enabled by U-Boot if PCIe module is present */
status = "disabled";
--- a/arch/arm64/boot/dts/marvell/armada-37xx.dtsi
+++ b/arch/arm64/boot/dts/marvell/armada-37xx.dtsi
@@ -494,6 +494,7 @@
<0 0 0 2 &pcie_intc 1>,
<0 0 0 3 &pcie_intc 2>,
<0 0 0 4 &pcie_intc 3>;
+ phys = <&comphy1 0>;
pcie_intc: interrupt-controller {
interrupt-controller;
#interrupt-cells = <1>;