Carlo Nel 6bbb220255 ramips: add support for TP-Link TL-MR3020 v3 ... TP-Link TL-MR3020 v3 is a pocket-size router based on MediaTek MT7628N. This PR is based on the work of @meyergru[1], with his permission. Specification: - MediaTek MT7628N/N (575 Mhz) - 64 MB of RAM - 8 MB of FLASH - 2T2R 2.4 GHz - 1x 10/100 Mbps Ethernet Flash instruction: The only way to flash the image in TL-MR3020 v3 is to use tftp recovery mode in U-Boot: 1. Configure PC with static IP 192.168.0.225/24 and tftp server. 2. Rename "openwrt-ramips-mt76x8-tplink_tl-mr3020-v3-squashfs-tftp-recovery.bin" to "tp_recovery.bin" and place it in tftp server directory. 3. Connect PC with the LAN port, press the reset button, power up the router and keep button pressed for around 6-7 seconds, until device starts downloading the file. 4. Router will download file from server, write it to flash and reboot. [1] https://github.com/meyergru/lede-source/commits/TL-MR3020-V3 Signed-off-by: Carlo Nel <carlojnel@gmail.com>		2018-09-06 21:36:42 +02:00
..
board.d	ramips: add support for TP-Link TL-MR3020 v3	2018-09-06 21:36:42 +02:00
hotplug.d	ramips: add support for D-Link DWR-118-A2	2018-08-15 07:42:36 +02:00
init.d	treewide: use the generic board_name function	2017-07-15 23:13:34 +02:00
uci-defaults	ramips: use generic board detection for D-Link DAP-1522 A1	2018-02-20 19:25:17 +01:00
diag.sh	ramips: remove stale get_status_led call	2018-07-25 08:57:17 +02:00
inittab	image / basefiles: make console password configurable	2016-04-18 21:53:07 +02:00