mirror of
https://github.com/openwrt/openwrt.git
synced 2024-12-23 23:42:43 +00:00
99545b4bb1
This target adds support for the Allwinner D1 RISC-V based SoCs.
- RISC-V single-core T-Head C906 (RV64GCV)
- Tensilica HiFi4 DSP
- DDR2/DDR3 support
- 10/100/1000M ethernet
- usual peripherals like USB2, SPI, I2C, PWM, etc.
Four boards are supported:
- Dongshan Nezha STU
- 512Mb RAM
- ethernet
- LicheePi RV Dock
- 512Mb RAM
- wireless-only (RTL8723DS)
- MangoPi MQ-Pro
- 512Mb RAM
- there are pads available for an SPI flash
- wireless-only (RTL8723DS)
- Nezha D1
- 512Mb/1Gb/2Gb RAM
- 256Mb NAND flash
- ethernet, wireless
Installation:
Standard SD-card installation via dd-ing the generated image to
an SD-card of at least 256Mb.
Signed-off-by: Zoltan HERPAI <wigyori@uid0.hu>
81 lines
1.7 KiB
Diff
81 lines
1.7 KiB
Diff
From bf83f1dc034111aac1f23b98d7205d08c7c83208 Mon Sep 17 00:00:00 2001
|
|
From: Samuel Holland <samuel@sholland.org>
|
|
Date: Wed, 17 Aug 2022 02:33:25 -0500
|
|
Subject: [PATCH 036/117] riscv: dts: allwinner: Add Bluetooth PCM audio
|
|
|
|
Signed-off-by: Samuel Holland <samuel@sholland.org>
|
|
---
|
|
.../allwinner/sun20i-d1-clockworkpi-v3.14.dts | 47 +++++++++++++++++++
|
|
1 file changed, 47 insertions(+)
|
|
|
|
--- a/arch/riscv/boot/dts/allwinner/sun20i-d1-clockworkpi-v3.14.dts
|
|
+++ b/arch/riscv/boot/dts/allwinner/sun20i-d1-clockworkpi-v3.14.dts
|
|
@@ -22,6 +22,32 @@
|
|
stdout-path = "serial0:115200n8";
|
|
};
|
|
|
|
+ bt_sco_codec: bt-sco-codec {
|
|
+ #sound-dai-cells = <0>;
|
|
+ compatible = "linux,bt-sco";
|
|
+ };
|
|
+
|
|
+ bt-sound {
|
|
+ compatible = "simple-audio-card";
|
|
+ simple-audio-card,name = "Bluetooth";
|
|
+ #address-cells = <1>;
|
|
+ #size-cells = <0>;
|
|
+
|
|
+ simple-audio-card,dai-link@0 {
|
|
+ format = "dsp_a";
|
|
+ frame-master = <&bt_sound_cpu>;
|
|
+ bitclock-master = <&bt_sound_cpu>;
|
|
+
|
|
+ bt_sound_cpu: cpu {
|
|
+ sound-dai = <&i2s1>;
|
|
+ };
|
|
+
|
|
+ codec {
|
|
+ sound-dai = <&bt_sco_codec>;
|
|
+ };
|
|
+ };
|
|
+ };
|
|
+
|
|
/*
|
|
* This regulator is PWM-controlled, but the PWM controller is not
|
|
* yet supported, so fix the regulator to its default voltage.
|
|
@@ -169,6 +195,12 @@
|
|
};
|
|
};
|
|
|
|
+&i2s1 {
|
|
+ pinctrl-0 = <&i2s1_clk_pins>, <&i2s1_din_pin>, <&i2s1_dout_pin>;
|
|
+ pinctrl-names = "default";
|
|
+ status = "okay";
|
|
+};
|
|
+
|
|
&mmc0 {
|
|
broken-cd;
|
|
bus-width = <4>;
|
|
@@ -205,6 +237,21 @@
|
|
|
|
&pio {
|
|
vcc-pg-supply = <®_ldoa>;
|
|
+
|
|
+ i2s1_clk_pins: i2s1-clk-pins {
|
|
+ pins = "PG12", "PG13";
|
|
+ function = "i2s1";
|
|
+ };
|
|
+
|
|
+ i2s1_din_pin: i2s1-din-pin {
|
|
+ pins = "PG14";
|
|
+ function = "i2s1_din";
|
|
+ };
|
|
+
|
|
+ i2s1_dout_pin: i2s1-dout-pin {
|
|
+ pins = "PG15";
|
|
+ function = "i2s1_dout";
|
|
+ };
|
|
};
|
|
|
|
&uart0 {
|