mirror of
https://github.com/openwrt/openwrt.git
synced 2024-12-23 23:42:43 +00:00
99545b4bb1
This target adds support for the Allwinner D1 RISC-V based SoCs.
- RISC-V single-core T-Head C906 (RV64GCV)
- Tensilica HiFi4 DSP
- DDR2/DDR3 support
- 10/100/1000M ethernet
- usual peripherals like USB2, SPI, I2C, PWM, etc.
Four boards are supported:
- Dongshan Nezha STU
- 512Mb RAM
- ethernet
- LicheePi RV Dock
- 512Mb RAM
- wireless-only (RTL8723DS)
- MangoPi MQ-Pro
- 512Mb RAM
- there are pads available for an SPI flash
- wireless-only (RTL8723DS)
- Nezha D1
- 512Mb/1Gb/2Gb RAM
- 256Mb NAND flash
- ethernet, wireless
Installation:
Standard SD-card installation via dd-ing the generated image to
an SD-card of at least 256Mb.
Signed-off-by: Zoltan HERPAI <wigyori@uid0.hu>
147 lines
3.6 KiB
Diff
147 lines
3.6 KiB
Diff
From 1f26c90ac9cbb60ff315c552368a3bca16562e51 Mon Sep 17 00:00:00 2001
|
|
From: Samuel Holland <samuel@sholland.org>
|
|
Date: Sun, 10 Jul 2022 11:24:42 -0500
|
|
Subject: [PATCH 032/117] riscv: dts: allwinner: Add Dongshan Nezha STU
|
|
devicetree
|
|
|
|
The 100ask Dongshan Nezha STU is a system-on-module that can be used
|
|
standalone or with a carrier board. The SoM provides gigabit Ethernet,
|
|
HDMI, a USB peripheral port, and WiFi/Bluetooth via an RTL8723DS chip.
|
|
|
|
The "DIY" carrier board exposes almost every pin from the D1 SoC to 0.1"
|
|
headers, but contains no digital circuitry, so it does not have its own
|
|
devicetree.
|
|
|
|
Signed-off-by: Samuel Holland <samuel@sholland.org>
|
|
---
|
|
arch/riscv/boot/dts/allwinner/Makefile | 1 +
|
|
.../sun20i-d1-dongshan-nezha-stu.dts | 114 ++++++++++++++++++
|
|
2 files changed, 115 insertions(+)
|
|
create mode 100644 arch/riscv/boot/dts/allwinner/sun20i-d1-dongshan-nezha-stu.dts
|
|
|
|
--- a/arch/riscv/boot/dts/allwinner/Makefile
|
|
+++ b/arch/riscv/boot/dts/allwinner/Makefile
|
|
@@ -1,4 +1,5 @@
|
|
# SPDX-License-Identifier: GPL-2.0
|
|
+dtb-$(CONFIG_ARCH_SUNXI) += sun20i-d1-dongshan-nezha-stu.dtb
|
|
dtb-$(CONFIG_ARCH_SUNXI) += sun20i-d1-lichee-rv-86-panel-480p.dtb
|
|
dtb-$(CONFIG_ARCH_SUNXI) += sun20i-d1-lichee-rv-86-panel-720p.dtb
|
|
dtb-$(CONFIG_ARCH_SUNXI) += sun20i-d1-lichee-rv-dock.dtb
|
|
--- /dev/null
|
|
+++ b/arch/riscv/boot/dts/allwinner/sun20i-d1-dongshan-nezha-stu.dts
|
|
@@ -0,0 +1,114 @@
|
|
+// SPDX-License-Identifier: (GPL-2.0+ or MIT)
|
|
+// Copyright (C) 2022 Samuel Holland <samuel@sholland.org>
|
|
+
|
|
+/dts-v1/;
|
|
+
|
|
+#include <dt-bindings/gpio/gpio.h>
|
|
+#include <dt-bindings/leds/common.h>
|
|
+
|
|
+#include "sun20i-d1.dtsi"
|
|
+#include "sun20i-d1-common-regulators.dtsi"
|
|
+
|
|
+/ {
|
|
+ model = "Dongshan Nezha STU";
|
|
+ compatible = "100ask,dongshan-nezha-stu", "allwinner,sun20i-d1";
|
|
+
|
|
+ aliases {
|
|
+ ethernet0 = &emac;
|
|
+ mmc0 = &mmc0;
|
|
+ serial0 = &uart0;
|
|
+ };
|
|
+
|
|
+ chosen {
|
|
+ stdout-path = "serial0:115200n8";
|
|
+ };
|
|
+
|
|
+ leds {
|
|
+ compatible = "gpio-leds";
|
|
+
|
|
+ led-0 {
|
|
+ color = <LED_COLOR_ID_GREEN>;
|
|
+ function = LED_FUNCTION_STATUS;
|
|
+ gpios = <&pio 2 1 GPIO_ACTIVE_HIGH>; /* PC1 */
|
|
+ };
|
|
+ };
|
|
+
|
|
+ reg_usbvbus: usbvbus {
|
|
+ compatible = "regulator-fixed";
|
|
+ regulator-name = "usbvbus";
|
|
+ regulator-min-microvolt = <5000000>;
|
|
+ regulator-max-microvolt = <5000000>;
|
|
+ gpio = <&pio 3 19 GPIO_ACTIVE_HIGH>; /* PD19 */
|
|
+ enable-active-high;
|
|
+ vin-supply = <®_vcc>;
|
|
+ };
|
|
+
|
|
+ /*
|
|
+ * This regulator is PWM-controlled, but the PWM controller is not
|
|
+ * yet supported, so fix the regulator to its default voltage.
|
|
+ */
|
|
+ reg_vdd_cpu: vdd-cpu {
|
|
+ compatible = "regulator-fixed";
|
|
+ regulator-name = "vdd-cpu";
|
|
+ regulator-min-microvolt = <1100000>;
|
|
+ regulator-max-microvolt = <1100000>;
|
|
+ vin-supply = <®_vcc>;
|
|
+ };
|
|
+};
|
|
+
|
|
+&cpu0 {
|
|
+ cpu-supply = <®_vdd_cpu>;
|
|
+};
|
|
+
|
|
+&ehci0 {
|
|
+ status = "okay";
|
|
+};
|
|
+
|
|
+&emac {
|
|
+ pinctrl-0 = <&rgmii_pe_pins>;
|
|
+ pinctrl-names = "default";
|
|
+ phy-handle = <&ext_rgmii_phy>;
|
|
+ phy-mode = "rgmii-id";
|
|
+ phy-supply = <®_vcc_3v3>;
|
|
+ status = "okay";
|
|
+};
|
|
+
|
|
+&mdio {
|
|
+ ext_rgmii_phy: ethernet-phy@1 {
|
|
+ compatible = "ethernet-phy-ieee802.3-c22";
|
|
+ reg = <1>;
|
|
+ };
|
|
+};
|
|
+
|
|
+&mmc0 {
|
|
+ broken-cd;
|
|
+ bus-width = <4>;
|
|
+ disable-wp;
|
|
+ vmmc-supply = <®_vcc_3v3>;
|
|
+ vqmmc-supply = <®_vcc_3v3>;
|
|
+ pinctrl-0 = <&mmc0_pins>;
|
|
+ pinctrl-names = "default";
|
|
+ status = "okay";
|
|
+};
|
|
+
|
|
+&ohci0 {
|
|
+ status = "okay";
|
|
+};
|
|
+
|
|
+&uart0 {
|
|
+ pinctrl-0 = <&uart0_pb8_pins>;
|
|
+ pinctrl-names = "default";
|
|
+ status = "okay";
|
|
+};
|
|
+
|
|
+&usb_otg {
|
|
+ dr_mode = "otg";
|
|
+ status = "okay";
|
|
+};
|
|
+
|
|
+&usbphy {
|
|
+ usb0_id_det-gpios = <&pio 3 21 GPIO_ACTIVE_HIGH>; /* PD21 */
|
|
+ usb0_vbus_det-gpios = <&pio 3 20 GPIO_ACTIVE_HIGH>; /* PD20 */
|
|
+ usb0_vbus-supply = <®_usbvbus>;
|
|
+ status = "okay";
|
|
+};
|