mirror of
https://github.com/openwrt/openwrt.git
synced 2024-12-23 07:22:33 +00:00
61ff8d986d
SVN-Revision: 21768
531 lines
25 KiB
Diff
531 lines
25 KiB
Diff
--- a/drivers/ssb/driver_chipcommon.c
|
|
+++ b/drivers/ssb/driver_chipcommon.c
|
|
@@ -233,6 +233,8 @@ void ssb_chipcommon_init(struct ssb_chip
|
|
{
|
|
if (!cc->dev)
|
|
return; /* We don't have a ChipCommon */
|
|
+ if (cc->dev->id.revision >= 11)
|
|
+ cc->status = chipco_read32(cc, SSB_CHIPCO_CHIPSTAT);
|
|
ssb_pmu_init(cc);
|
|
chipco_powercontrol_init(cc);
|
|
ssb_chipco_set_clockmode(cc, SSB_CLKMODE_FAST);
|
|
@@ -370,6 +372,7 @@ u32 ssb_chipco_gpio_control(struct ssb_c
|
|
{
|
|
return chipco_write32_masked(cc, SSB_CHIPCO_GPIOCTL, mask, value);
|
|
}
|
|
+EXPORT_SYMBOL(ssb_chipco_gpio_control);
|
|
|
|
u32 ssb_chipco_gpio_intmask(struct ssb_chipcommon *cc, u32 mask, u32 value)
|
|
{
|
|
--- a/drivers/ssb/main.c
|
|
+++ b/drivers/ssb/main.c
|
|
@@ -834,6 +834,9 @@ int ssb_bus_pcibus_register(struct ssb_b
|
|
if (!err) {
|
|
ssb_printk(KERN_INFO PFX "Sonics Silicon Backplane found on "
|
|
"PCI device %s\n", dev_name(&host_pci->dev));
|
|
+ } else {
|
|
+ ssb_printk(KERN_ERR PFX "Failed to register PCI version"
|
|
+ " of SSB with error %d\n", err);
|
|
}
|
|
|
|
return err;
|
|
--- a/drivers/ssb/pci.c
|
|
+++ b/drivers/ssb/pci.c
|
|
@@ -168,7 +168,7 @@ err_pci:
|
|
}
|
|
|
|
/* Get the word-offset for a SSB_SPROM_XXX define. */
|
|
-#define SPOFF(offset) (((offset) - SSB_SPROM_BASE) / sizeof(u16))
|
|
+#define SPOFF(offset) ((offset) / sizeof(u16))
|
|
/* Helper to extract some _offset, which is one of the SSB_SPROM_XXX defines. */
|
|
#define SPEX16(_outvar, _offset, _mask, _shift) \
|
|
out->_outvar = ((in[SPOFF(_offset)] & (_mask)) >> (_shift))
|
|
@@ -254,7 +254,7 @@ static int sprom_do_read(struct ssb_bus
|
|
int i;
|
|
|
|
for (i = 0; i < bus->sprom_size; i++)
|
|
- sprom[i] = ioread16(bus->mmio + SSB_SPROM_BASE + (i * 2));
|
|
+ sprom[i] = ioread16(bus->mmio + bus->sprom_offset + (i * 2));
|
|
|
|
return 0;
|
|
}
|
|
@@ -285,7 +285,7 @@ static int sprom_do_write(struct ssb_bus
|
|
ssb_printk("75%%");
|
|
else if (i % 2)
|
|
ssb_printk(".");
|
|
- writew(sprom[i], bus->mmio + SSB_SPROM_BASE + (i * 2));
|
|
+ writew(sprom[i], bus->mmio + bus->sprom_offset + (i * 2));
|
|
mmiowb();
|
|
msleep(20);
|
|
}
|
|
@@ -621,6 +621,14 @@ static int ssb_pci_sprom_get(struct ssb_
|
|
int err = -ENOMEM;
|
|
u16 *buf;
|
|
|
|
+ if (!ssb_is_sprom_available(bus)) {
|
|
+ ssb_printk(KERN_ERR PFX "No SPROM available!\n");
|
|
+ return -ENODEV;
|
|
+ }
|
|
+
|
|
+ bus->sprom_offset = (bus->chipco.dev->id.revision < 31) ?
|
|
+ SSB_SPROM_BASE1 : SSB_SPROM_BASE31;
|
|
+
|
|
buf = kcalloc(SSB_SPROMSIZE_WORDS_R123, sizeof(u16), GFP_KERNEL);
|
|
if (!buf)
|
|
goto out;
|
|
--- a/drivers/ssb/sprom.c
|
|
+++ b/drivers/ssb/sprom.c
|
|
@@ -176,3 +176,17 @@ const struct ssb_sprom *ssb_get_fallback
|
|
{
|
|
return fallback_sprom;
|
|
}
|
|
+
|
|
+/* http://bcm-v4.sipsolutions.net/802.11/IsSpromAvailable */
|
|
+bool ssb_is_sprom_available(struct ssb_bus *bus)
|
|
+{
|
|
+ /* status register only exists on chipcomon rev >= 11 and we need check
|
|
+ for >= 31 only */
|
|
+ /* this routine differs from specs as we do not access SPROM directly
|
|
+ on PCMCIA */
|
|
+ if (bus->bustype == SSB_BUSTYPE_PCI &&
|
|
+ bus->chipco.dev->id.revision >= 31)
|
|
+ return bus->chipco.capabilities & SSB_CHIPCO_CAP_SPROM;
|
|
+
|
|
+ return true;
|
|
+}
|
|
--- a/include/linux/ssb/ssb.h
|
|
+++ b/include/linux/ssb/ssb.h
|
|
@@ -305,6 +305,7 @@ struct ssb_bus {
|
|
/* ID information about the Chip. */
|
|
u16 chip_id;
|
|
u16 chip_rev;
|
|
+ u16 sprom_offset;
|
|
u16 sprom_size; /* number of words in sprom */
|
|
u8 chip_package;
|
|
|
|
@@ -394,6 +395,9 @@ extern int ssb_bus_sdiobus_register(stru
|
|
|
|
extern void ssb_bus_unregister(struct ssb_bus *bus);
|
|
|
|
+/* Does the device have an SPROM? */
|
|
+extern bool ssb_is_sprom_available(struct ssb_bus *bus);
|
|
+
|
|
/* Set a fallback SPROM.
|
|
* See kdoc at the function definition for complete documentation. */
|
|
extern int ssb_arch_set_fallback_sprom(const struct ssb_sprom *sprom);
|
|
--- a/include/linux/ssb/ssb_driver_chipcommon.h
|
|
+++ b/include/linux/ssb/ssb_driver_chipcommon.h
|
|
@@ -53,6 +53,7 @@
|
|
#define SSB_CHIPCO_CAP_64BIT 0x08000000 /* 64-bit Backplane */
|
|
#define SSB_CHIPCO_CAP_PMU 0x10000000 /* PMU available (rev >= 20) */
|
|
#define SSB_CHIPCO_CAP_ECI 0x20000000 /* ECI available (rev >= 20) */
|
|
+#define SSB_CHIPCO_CAP_SPROM 0x40000000 /* SPROM present */
|
|
#define SSB_CHIPCO_CORECTL 0x0008
|
|
#define SSB_CHIPCO_CORECTL_UARTCLK0 0x00000001 /* Drive UART with internal clock */
|
|
#define SSB_CHIPCO_CORECTL_SE 0x00000002 /* sync clk out enable (corerev >= 3) */
|
|
@@ -385,6 +386,7 @@
|
|
|
|
|
|
/** Chip specific Chip-Status register contents. */
|
|
+#define SSB_CHIPCO_CHST_4322_SPROM_EXISTS 0x00000040 /* SPROM present */
|
|
#define SSB_CHIPCO_CHST_4325_SPROM_OTP_SEL 0x00000003
|
|
#define SSB_CHIPCO_CHST_4325_DEFCIS_SEL 0 /* OTP is powered up, use def. CIS, no SPROM */
|
|
#define SSB_CHIPCO_CHST_4325_SPROM_SEL 1 /* OTP is powered up, SPROM is present */
|
|
@@ -398,6 +400,18 @@
|
|
#define SSB_CHIPCO_CHST_4325_RCAL_VALUE_SHIFT 4
|
|
#define SSB_CHIPCO_CHST_4325_PMUTOP_2B 0x00000200 /* 1 for 2b, 0 for to 2a */
|
|
|
|
+/** Macros to determine SPROM presence based on Chip-Status register. */
|
|
+#define SSB_CHIPCO_CHST_4312_SPROM_PRESENT(status) \
|
|
+ ((status & SSB_CHIPCO_CHST_4325_SPROM_OTP_SEL) != \
|
|
+ SSB_CHIPCO_CHST_4325_OTP_SEL)
|
|
+#define SSB_CHIPCO_CHST_4322_SPROM_PRESENT(status) \
|
|
+ (status & SSB_CHIPCO_CHST_4322_SPROM_EXISTS)
|
|
+#define SSB_CHIPCO_CHST_4325_SPROM_PRESENT(status) \
|
|
+ (((status & SSB_CHIPCO_CHST_4325_SPROM_OTP_SEL) != \
|
|
+ SSB_CHIPCO_CHST_4325_DEFCIS_SEL) && \
|
|
+ ((status & SSB_CHIPCO_CHST_4325_SPROM_OTP_SEL) != \
|
|
+ SSB_CHIPCO_CHST_4325_OTP_SEL))
|
|
+
|
|
|
|
|
|
/** Clockcontrol masks and values **/
|
|
@@ -564,6 +578,7 @@ struct ssb_chipcommon_pmu {
|
|
struct ssb_chipcommon {
|
|
struct ssb_device *dev;
|
|
u32 capabilities;
|
|
+ u32 status;
|
|
/* Fast Powerup Delay constant */
|
|
u16 fast_pwrup_delay;
|
|
struct ssb_chipcommon_pmu pmu;
|
|
--- a/include/linux/ssb/ssb_regs.h
|
|
+++ b/include/linux/ssb/ssb_regs.h
|
|
@@ -170,26 +170,27 @@
|
|
#define SSB_SPROMSIZE_WORDS_R4 220
|
|
#define SSB_SPROMSIZE_BYTES_R123 (SSB_SPROMSIZE_WORDS_R123 * sizeof(u16))
|
|
#define SSB_SPROMSIZE_BYTES_R4 (SSB_SPROMSIZE_WORDS_R4 * sizeof(u16))
|
|
-#define SSB_SPROM_BASE 0x1000
|
|
-#define SSB_SPROM_REVISION 0x107E
|
|
+#define SSB_SPROM_BASE1 0x1000
|
|
+#define SSB_SPROM_BASE31 0x0800
|
|
+#define SSB_SPROM_REVISION 0x007E
|
|
#define SSB_SPROM_REVISION_REV 0x00FF /* SPROM Revision number */
|
|
#define SSB_SPROM_REVISION_CRC 0xFF00 /* SPROM CRC8 value */
|
|
#define SSB_SPROM_REVISION_CRC_SHIFT 8
|
|
|
|
/* SPROM Revision 1 */
|
|
-#define SSB_SPROM1_SPID 0x1004 /* Subsystem Product ID for PCI */
|
|
-#define SSB_SPROM1_SVID 0x1006 /* Subsystem Vendor ID for PCI */
|
|
-#define SSB_SPROM1_PID 0x1008 /* Product ID for PCI */
|
|
-#define SSB_SPROM1_IL0MAC 0x1048 /* 6 bytes MAC address for 802.11b/g */
|
|
-#define SSB_SPROM1_ET0MAC 0x104E /* 6 bytes MAC address for Ethernet */
|
|
-#define SSB_SPROM1_ET1MAC 0x1054 /* 6 bytes MAC address for 802.11a */
|
|
-#define SSB_SPROM1_ETHPHY 0x105A /* Ethernet PHY settings */
|
|
+#define SSB_SPROM1_SPID 0x0004 /* Subsystem Product ID for PCI */
|
|
+#define SSB_SPROM1_SVID 0x0006 /* Subsystem Vendor ID for PCI */
|
|
+#define SSB_SPROM1_PID 0x0008 /* Product ID for PCI */
|
|
+#define SSB_SPROM1_IL0MAC 0x0048 /* 6 bytes MAC address for 802.11b/g */
|
|
+#define SSB_SPROM1_ET0MAC 0x004E /* 6 bytes MAC address for Ethernet */
|
|
+#define SSB_SPROM1_ET1MAC 0x0054 /* 6 bytes MAC address for 802.11a */
|
|
+#define SSB_SPROM1_ETHPHY 0x005A /* Ethernet PHY settings */
|
|
#define SSB_SPROM1_ETHPHY_ET0A 0x001F /* MII Address for enet0 */
|
|
#define SSB_SPROM1_ETHPHY_ET1A 0x03E0 /* MII Address for enet1 */
|
|
#define SSB_SPROM1_ETHPHY_ET1A_SHIFT 5
|
|
#define SSB_SPROM1_ETHPHY_ET0M (1<<14) /* MDIO for enet0 */
|
|
#define SSB_SPROM1_ETHPHY_ET1M (1<<15) /* MDIO for enet1 */
|
|
-#define SSB_SPROM1_BINF 0x105C /* Board info */
|
|
+#define SSB_SPROM1_BINF 0x005C /* Board info */
|
|
#define SSB_SPROM1_BINF_BREV 0x00FF /* Board Revision */
|
|
#define SSB_SPROM1_BINF_CCODE 0x0F00 /* Country Code */
|
|
#define SSB_SPROM1_BINF_CCODE_SHIFT 8
|
|
@@ -197,63 +198,63 @@
|
|
#define SSB_SPROM1_BINF_ANTBG_SHIFT 12
|
|
#define SSB_SPROM1_BINF_ANTA 0xC000 /* Available A-PHY antennas */
|
|
#define SSB_SPROM1_BINF_ANTA_SHIFT 14
|
|
-#define SSB_SPROM1_PA0B0 0x105E
|
|
-#define SSB_SPROM1_PA0B1 0x1060
|
|
-#define SSB_SPROM1_PA0B2 0x1062
|
|
-#define SSB_SPROM1_GPIOA 0x1064 /* General Purpose IO pins 0 and 1 */
|
|
+#define SSB_SPROM1_PA0B0 0x005E
|
|
+#define SSB_SPROM1_PA0B1 0x0060
|
|
+#define SSB_SPROM1_PA0B2 0x0062
|
|
+#define SSB_SPROM1_GPIOA 0x0064 /* General Purpose IO pins 0 and 1 */
|
|
#define SSB_SPROM1_GPIOA_P0 0x00FF /* Pin 0 */
|
|
#define SSB_SPROM1_GPIOA_P1 0xFF00 /* Pin 1 */
|
|
#define SSB_SPROM1_GPIOA_P1_SHIFT 8
|
|
-#define SSB_SPROM1_GPIOB 0x1066 /* General Purpuse IO pins 2 and 3 */
|
|
+#define SSB_SPROM1_GPIOB 0x0066 /* General Purpuse IO pins 2 and 3 */
|
|
#define SSB_SPROM1_GPIOB_P2 0x00FF /* Pin 2 */
|
|
#define SSB_SPROM1_GPIOB_P3 0xFF00 /* Pin 3 */
|
|
#define SSB_SPROM1_GPIOB_P3_SHIFT 8
|
|
-#define SSB_SPROM1_MAXPWR 0x1068 /* Power Amplifier Max Power */
|
|
+#define SSB_SPROM1_MAXPWR 0x0068 /* Power Amplifier Max Power */
|
|
#define SSB_SPROM1_MAXPWR_BG 0x00FF /* B-PHY and G-PHY (in dBm Q5.2) */
|
|
#define SSB_SPROM1_MAXPWR_A 0xFF00 /* A-PHY (in dBm Q5.2) */
|
|
#define SSB_SPROM1_MAXPWR_A_SHIFT 8
|
|
-#define SSB_SPROM1_PA1B0 0x106A
|
|
-#define SSB_SPROM1_PA1B1 0x106C
|
|
-#define SSB_SPROM1_PA1B2 0x106E
|
|
-#define SSB_SPROM1_ITSSI 0x1070 /* Idle TSSI Target */
|
|
+#define SSB_SPROM1_PA1B0 0x006A
|
|
+#define SSB_SPROM1_PA1B1 0x006C
|
|
+#define SSB_SPROM1_PA1B2 0x006E
|
|
+#define SSB_SPROM1_ITSSI 0x0070 /* Idle TSSI Target */
|
|
#define SSB_SPROM1_ITSSI_BG 0x00FF /* B-PHY and G-PHY*/
|
|
#define SSB_SPROM1_ITSSI_A 0xFF00 /* A-PHY */
|
|
#define SSB_SPROM1_ITSSI_A_SHIFT 8
|
|
-#define SSB_SPROM1_BFLLO 0x1072 /* Boardflags (low 16 bits) */
|
|
-#define SSB_SPROM1_AGAIN 0x1074 /* Antenna Gain (in dBm Q5.2) */
|
|
+#define SSB_SPROM1_BFLLO 0x0072 /* Boardflags (low 16 bits) */
|
|
+#define SSB_SPROM1_AGAIN 0x0074 /* Antenna Gain (in dBm Q5.2) */
|
|
#define SSB_SPROM1_AGAIN_BG 0x00FF /* B-PHY and G-PHY */
|
|
#define SSB_SPROM1_AGAIN_BG_SHIFT 0
|
|
#define SSB_SPROM1_AGAIN_A 0xFF00 /* A-PHY */
|
|
#define SSB_SPROM1_AGAIN_A_SHIFT 8
|
|
|
|
/* SPROM Revision 2 (inherits from rev 1) */
|
|
-#define SSB_SPROM2_BFLHI 0x1038 /* Boardflags (high 16 bits) */
|
|
-#define SSB_SPROM2_MAXP_A 0x103A /* A-PHY Max Power */
|
|
+#define SSB_SPROM2_BFLHI 0x0038 /* Boardflags (high 16 bits) */
|
|
+#define SSB_SPROM2_MAXP_A 0x003A /* A-PHY Max Power */
|
|
#define SSB_SPROM2_MAXP_A_HI 0x00FF /* Max Power High */
|
|
#define SSB_SPROM2_MAXP_A_LO 0xFF00 /* Max Power Low */
|
|
#define SSB_SPROM2_MAXP_A_LO_SHIFT 8
|
|
-#define SSB_SPROM2_PA1LOB0 0x103C /* A-PHY PowerAmplifier Low Settings */
|
|
-#define SSB_SPROM2_PA1LOB1 0x103E /* A-PHY PowerAmplifier Low Settings */
|
|
-#define SSB_SPROM2_PA1LOB2 0x1040 /* A-PHY PowerAmplifier Low Settings */
|
|
-#define SSB_SPROM2_PA1HIB0 0x1042 /* A-PHY PowerAmplifier High Settings */
|
|
-#define SSB_SPROM2_PA1HIB1 0x1044 /* A-PHY PowerAmplifier High Settings */
|
|
-#define SSB_SPROM2_PA1HIB2 0x1046 /* A-PHY PowerAmplifier High Settings */
|
|
-#define SSB_SPROM2_OPO 0x1078 /* OFDM Power Offset from CCK Level */
|
|
+#define SSB_SPROM2_PA1LOB0 0x003C /* A-PHY PowerAmplifier Low Settings */
|
|
+#define SSB_SPROM2_PA1LOB1 0x003E /* A-PHY PowerAmplifier Low Settings */
|
|
+#define SSB_SPROM2_PA1LOB2 0x0040 /* A-PHY PowerAmplifier Low Settings */
|
|
+#define SSB_SPROM2_PA1HIB0 0x0042 /* A-PHY PowerAmplifier High Settings */
|
|
+#define SSB_SPROM2_PA1HIB1 0x0044 /* A-PHY PowerAmplifier High Settings */
|
|
+#define SSB_SPROM2_PA1HIB2 0x0046 /* A-PHY PowerAmplifier High Settings */
|
|
+#define SSB_SPROM2_OPO 0x0078 /* OFDM Power Offset from CCK Level */
|
|
#define SSB_SPROM2_OPO_VALUE 0x00FF
|
|
#define SSB_SPROM2_OPO_UNUSED 0xFF00
|
|
-#define SSB_SPROM2_CCODE 0x107C /* Two char Country Code */
|
|
+#define SSB_SPROM2_CCODE 0x007C /* Two char Country Code */
|
|
|
|
/* SPROM Revision 3 (inherits most data from rev 2) */
|
|
-#define SSB_SPROM3_IL0MAC 0x104A /* 6 bytes MAC address for 802.11b/g */
|
|
-#define SSB_SPROM3_OFDMAPO 0x102C /* A-PHY OFDM Mid Power Offset (4 bytes, BigEndian) */
|
|
-#define SSB_SPROM3_OFDMALPO 0x1030 /* A-PHY OFDM Low Power Offset (4 bytes, BigEndian) */
|
|
-#define SSB_SPROM3_OFDMAHPO 0x1034 /* A-PHY OFDM High Power Offset (4 bytes, BigEndian) */
|
|
-#define SSB_SPROM3_GPIOLDC 0x1042 /* GPIO LED Powersave Duty Cycle (4 bytes, BigEndian) */
|
|
+#define SSB_SPROM3_OFDMAPO 0x002C /* A-PHY OFDM Mid Power Offset (4 bytes, BigEndian) */
|
|
+#define SSB_SPROM3_OFDMALPO 0x0030 /* A-PHY OFDM Low Power Offset (4 bytes, BigEndian) */
|
|
+#define SSB_SPROM3_OFDMAHPO 0x0034 /* A-PHY OFDM High Power Offset (4 bytes, BigEndian) */
|
|
+#define SSB_SPROM3_GPIOLDC 0x0042 /* GPIO LED Powersave Duty Cycle (4 bytes, BigEndian) */
|
|
#define SSB_SPROM3_GPIOLDC_OFF 0x0000FF00 /* Off Count */
|
|
#define SSB_SPROM3_GPIOLDC_OFF_SHIFT 8
|
|
#define SSB_SPROM3_GPIOLDC_ON 0x00FF0000 /* On Count */
|
|
#define SSB_SPROM3_GPIOLDC_ON_SHIFT 16
|
|
-#define SSB_SPROM3_CCKPO 0x1078 /* CCK Power Offset */
|
|
+#define SSB_SPROM3_IL0MAC 0x004A /* 6 bytes MAC address for 802.11b/g */
|
|
+#define SSB_SPROM3_CCKPO 0x0078 /* CCK Power Offset */
|
|
#define SSB_SPROM3_CCKPO_1M 0x000F /* 1M Rate PO */
|
|
#define SSB_SPROM3_CCKPO_2M 0x00F0 /* 2M Rate PO */
|
|
#define SSB_SPROM3_CCKPO_2M_SHIFT 4
|
|
@@ -264,100 +265,100 @@
|
|
#define SSB_SPROM3_OFDMGPO 0x107A /* G-PHY OFDM Power Offset (4 bytes, BigEndian) */
|
|
|
|
/* SPROM Revision 4 */
|
|
-#define SSB_SPROM4_IL0MAC 0x104C /* 6 byte MAC address for a/b/g/n */
|
|
-#define SSB_SPROM4_ETHPHY 0x105A /* Ethernet PHY settings ?? */
|
|
+#define SSB_SPROM4_BFLLO 0x0044 /* Boardflags (low 16 bits) */
|
|
+#define SSB_SPROM4_BFLHI 0x0046 /* Board Flags Hi */
|
|
+#define SSB_SPROM4_IL0MAC 0x004C /* 6 byte MAC address for a/b/g/n */
|
|
+#define SSB_SPROM4_CCODE 0x0052 /* Country Code (2 bytes) */
|
|
+#define SSB_SPROM4_GPIOA 0x0056 /* Gen. Purpose IO # 0 and 1 */
|
|
+#define SSB_SPROM4_GPIOA_P0 0x00FF /* Pin 0 */
|
|
+#define SSB_SPROM4_GPIOA_P1 0xFF00 /* Pin 1 */
|
|
+#define SSB_SPROM4_GPIOA_P1_SHIFT 8
|
|
+#define SSB_SPROM4_GPIOB 0x0058 /* Gen. Purpose IO # 2 and 3 */
|
|
+#define SSB_SPROM4_GPIOB_P2 0x00FF /* Pin 2 */
|
|
+#define SSB_SPROM4_GPIOB_P3 0xFF00 /* Pin 3 */
|
|
+#define SSB_SPROM4_GPIOB_P3_SHIFT 8
|
|
+#define SSB_SPROM4_ETHPHY 0x005A /* Ethernet PHY settings ?? */
|
|
#define SSB_SPROM4_ETHPHY_ET0A 0x001F /* MII Address for enet0 */
|
|
#define SSB_SPROM4_ETHPHY_ET1A 0x03E0 /* MII Address for enet1 */
|
|
#define SSB_SPROM4_ETHPHY_ET1A_SHIFT 5
|
|
#define SSB_SPROM4_ETHPHY_ET0M (1<<14) /* MDIO for enet0 */
|
|
#define SSB_SPROM4_ETHPHY_ET1M (1<<15) /* MDIO for enet1 */
|
|
-#define SSB_SPROM4_CCODE 0x1052 /* Country Code (2 bytes) */
|
|
-#define SSB_SPROM4_ANTAVAIL 0x105D /* Antenna available bitfields */
|
|
-#define SSB_SPROM4_ANTAVAIL_A 0x00FF /* A-PHY bitfield */
|
|
-#define SSB_SPROM4_ANTAVAIL_A_SHIFT 0
|
|
-#define SSB_SPROM4_ANTAVAIL_BG 0xFF00 /* B-PHY and G-PHY bitfield */
|
|
-#define SSB_SPROM4_ANTAVAIL_BG_SHIFT 8
|
|
-#define SSB_SPROM4_BFLLO 0x1044 /* Boardflags (low 16 bits) */
|
|
-#define SSB_SPROM4_AGAIN01 0x105E /* Antenna Gain (in dBm Q5.2) */
|
|
+#define SSB_SPROM4_ANTAVAIL 0x005D /* Antenna available bitfields */
|
|
+#define SSB_SPROM4_ANTAVAIL_A 0x00FF /* A-PHY bitfield */
|
|
+#define SSB_SPROM4_ANTAVAIL_A_SHIFT 0
|
|
+#define SSB_SPROM4_ANTAVAIL_BG 0xFF00 /* B-PHY and G-PHY bitfield */
|
|
+#define SSB_SPROM4_ANTAVAIL_BG_SHIFT 8
|
|
+#define SSB_SPROM4_AGAIN01 0x005E /* Antenna Gain (in dBm Q5.2) */
|
|
#define SSB_SPROM4_AGAIN0 0x00FF /* Antenna 0 */
|
|
#define SSB_SPROM4_AGAIN0_SHIFT 0
|
|
#define SSB_SPROM4_AGAIN1 0xFF00 /* Antenna 1 */
|
|
#define SSB_SPROM4_AGAIN1_SHIFT 8
|
|
-#define SSB_SPROM4_AGAIN23 0x1060
|
|
+#define SSB_SPROM4_AGAIN23 0x0060
|
|
#define SSB_SPROM4_AGAIN2 0x00FF /* Antenna 2 */
|
|
#define SSB_SPROM4_AGAIN2_SHIFT 0
|
|
#define SSB_SPROM4_AGAIN3 0xFF00 /* Antenna 3 */
|
|
#define SSB_SPROM4_AGAIN3_SHIFT 8
|
|
-#define SSB_SPROM4_BFLHI 0x1046 /* Board Flags Hi */
|
|
-#define SSB_SPROM4_MAXP_BG 0x1080 /* Max Power BG in path 1 */
|
|
+#define SSB_SPROM4_MAXP_BG 0x0080 /* Max Power BG in path 1 */
|
|
#define SSB_SPROM4_MAXP_BG_MASK 0x00FF /* Mask for Max Power BG */
|
|
#define SSB_SPROM4_ITSSI_BG 0xFF00 /* Mask for path 1 itssi_bg */
|
|
#define SSB_SPROM4_ITSSI_BG_SHIFT 8
|
|
-#define SSB_SPROM4_MAXP_A 0x108A /* Max Power A in path 1 */
|
|
+#define SSB_SPROM4_MAXP_A 0x008A /* Max Power A in path 1 */
|
|
#define SSB_SPROM4_MAXP_A_MASK 0x00FF /* Mask for Max Power A */
|
|
#define SSB_SPROM4_ITSSI_A 0xFF00 /* Mask for path 1 itssi_a */
|
|
#define SSB_SPROM4_ITSSI_A_SHIFT 8
|
|
-#define SSB_SPROM4_GPIOA 0x1056 /* Gen. Purpose IO # 0 and 1 */
|
|
-#define SSB_SPROM4_GPIOA_P0 0x00FF /* Pin 0 */
|
|
-#define SSB_SPROM4_GPIOA_P1 0xFF00 /* Pin 1 */
|
|
-#define SSB_SPROM4_GPIOA_P1_SHIFT 8
|
|
-#define SSB_SPROM4_GPIOB 0x1058 /* Gen. Purpose IO # 2 and 3 */
|
|
-#define SSB_SPROM4_GPIOB_P2 0x00FF /* Pin 2 */
|
|
-#define SSB_SPROM4_GPIOB_P3 0xFF00 /* Pin 3 */
|
|
-#define SSB_SPROM4_GPIOB_P3_SHIFT 8
|
|
-#define SSB_SPROM4_PA0B0 0x1082 /* The paXbY locations are */
|
|
-#define SSB_SPROM4_PA0B1 0x1084 /* only guesses */
|
|
-#define SSB_SPROM4_PA0B2 0x1086
|
|
-#define SSB_SPROM4_PA1B0 0x108E
|
|
-#define SSB_SPROM4_PA1B1 0x1090
|
|
-#define SSB_SPROM4_PA1B2 0x1092
|
|
+#define SSB_SPROM4_PA0B0 0x0082 /* The paXbY locations are */
|
|
+#define SSB_SPROM4_PA0B1 0x0084 /* only guesses */
|
|
+#define SSB_SPROM4_PA0B2 0x0086
|
|
+#define SSB_SPROM4_PA1B0 0x008E
|
|
+#define SSB_SPROM4_PA1B1 0x0090
|
|
+#define SSB_SPROM4_PA1B2 0x0092
|
|
|
|
/* SPROM Revision 5 (inherits most data from rev 4) */
|
|
-#define SSB_SPROM5_BFLLO 0x104A /* Boardflags (low 16 bits) */
|
|
-#define SSB_SPROM5_BFLHI 0x104C /* Board Flags Hi */
|
|
-#define SSB_SPROM5_IL0MAC 0x1052 /* 6 byte MAC address for a/b/g/n */
|
|
-#define SSB_SPROM5_CCODE 0x1044 /* Country Code (2 bytes) */
|
|
-#define SSB_SPROM5_GPIOA 0x1076 /* Gen. Purpose IO # 0 and 1 */
|
|
+#define SSB_SPROM5_CCODE 0x0044 /* Country Code (2 bytes) */
|
|
+#define SSB_SPROM5_BFLLO 0x004A /* Boardflags (low 16 bits) */
|
|
+#define SSB_SPROM5_BFLHI 0x004C /* Board Flags Hi */
|
|
+#define SSB_SPROM5_IL0MAC 0x0052 /* 6 byte MAC address for a/b/g/n */
|
|
+#define SSB_SPROM5_GPIOA 0x0076 /* Gen. Purpose IO # 0 and 1 */
|
|
#define SSB_SPROM5_GPIOA_P0 0x00FF /* Pin 0 */
|
|
#define SSB_SPROM5_GPIOA_P1 0xFF00 /* Pin 1 */
|
|
#define SSB_SPROM5_GPIOA_P1_SHIFT 8
|
|
-#define SSB_SPROM5_GPIOB 0x1078 /* Gen. Purpose IO # 2 and 3 */
|
|
+#define SSB_SPROM5_GPIOB 0x0078 /* Gen. Purpose IO # 2 and 3 */
|
|
#define SSB_SPROM5_GPIOB_P2 0x00FF /* Pin 2 */
|
|
#define SSB_SPROM5_GPIOB_P3 0xFF00 /* Pin 3 */
|
|
#define SSB_SPROM5_GPIOB_P3_SHIFT 8
|
|
|
|
/* SPROM Revision 8 */
|
|
-#define SSB_SPROM8_BOARDREV 0x1082 /* Board revision */
|
|
-#define SSB_SPROM8_BFLLO 0x1084 /* Board flags (bits 0-15) */
|
|
-#define SSB_SPROM8_BFLHI 0x1086 /* Board flags (bits 16-31) */
|
|
-#define SSB_SPROM8_BFL2LO 0x1088 /* Board flags (bits 32-47) */
|
|
-#define SSB_SPROM8_BFL2HI 0x108A /* Board flags (bits 48-63) */
|
|
-#define SSB_SPROM8_IL0MAC 0x108C /* 6 byte MAC address */
|
|
-#define SSB_SPROM8_CCODE 0x1092 /* 2 byte country code */
|
|
-#define SSB_SPROM8_ANTAVAIL 0x109C /* Antenna available bitfields*/
|
|
-#define SSB_SPROM8_ANTAVAIL_A 0xFF00 /* A-PHY bitfield */
|
|
-#define SSB_SPROM8_ANTAVAIL_A_SHIFT 8
|
|
-#define SSB_SPROM8_ANTAVAIL_BG 0x00FF /* B-PHY and G-PHY bitfield */
|
|
-#define SSB_SPROM8_ANTAVAIL_BG_SHIFT 0
|
|
-#define SSB_SPROM8_AGAIN01 0x109E /* Antenna Gain (in dBm Q5.2) */
|
|
+#define SSB_SPROM8_BOARDREV 0x0082 /* Board revision */
|
|
+#define SSB_SPROM8_BFLLO 0x0084 /* Board flags (bits 0-15) */
|
|
+#define SSB_SPROM8_BFLHI 0x0086 /* Board flags (bits 16-31) */
|
|
+#define SSB_SPROM8_BFL2LO 0x0088 /* Board flags (bits 32-47) */
|
|
+#define SSB_SPROM8_BFL2HI 0x008A /* Board flags (bits 48-63) */
|
|
+#define SSB_SPROM8_IL0MAC 0x008C /* 6 byte MAC address */
|
|
+#define SSB_SPROM8_CCODE 0x0092 /* 2 byte country code */
|
|
+#define SSB_SPROM8_GPIOA 0x0096 /*Gen. Purpose IO # 0 and 1 */
|
|
+#define SSB_SPROM8_GPIOA_P0 0x00FF /* Pin 0 */
|
|
+#define SSB_SPROM8_GPIOA_P1 0xFF00 /* Pin 1 */
|
|
+#define SSB_SPROM8_GPIOA_P1_SHIFT 8
|
|
+#define SSB_SPROM8_GPIOB 0x0098 /* Gen. Purpose IO # 2 and 3 */
|
|
+#define SSB_SPROM8_GPIOB_P2 0x00FF /* Pin 2 */
|
|
+#define SSB_SPROM8_GPIOB_P3 0xFF00 /* Pin 3 */
|
|
+#define SSB_SPROM8_GPIOB_P3_SHIFT 8
|
|
+#define SSB_SPROM8_ANTAVAIL 0x009C /* Antenna available bitfields*/
|
|
+#define SSB_SPROM8_ANTAVAIL_A 0xFF00 /* A-PHY bitfield */
|
|
+#define SSB_SPROM8_ANTAVAIL_A_SHIFT 8
|
|
+#define SSB_SPROM8_ANTAVAIL_BG 0x00FF /* B-PHY and G-PHY bitfield */
|
|
+#define SSB_SPROM8_ANTAVAIL_BG_SHIFT 0
|
|
+#define SSB_SPROM8_AGAIN01 0x009E /* Antenna Gain (in dBm Q5.2) */
|
|
#define SSB_SPROM8_AGAIN0 0x00FF /* Antenna 0 */
|
|
#define SSB_SPROM8_AGAIN0_SHIFT 0
|
|
#define SSB_SPROM8_AGAIN1 0xFF00 /* Antenna 1 */
|
|
#define SSB_SPROM8_AGAIN1_SHIFT 8
|
|
-#define SSB_SPROM8_AGAIN23 0x10A0
|
|
+#define SSB_SPROM8_AGAIN23 0x00A0
|
|
#define SSB_SPROM8_AGAIN2 0x00FF /* Antenna 2 */
|
|
#define SSB_SPROM8_AGAIN2_SHIFT 0
|
|
#define SSB_SPROM8_AGAIN3 0xFF00 /* Antenna 3 */
|
|
#define SSB_SPROM8_AGAIN3_SHIFT 8
|
|
-#define SSB_SPROM8_GPIOA 0x1096 /*Gen. Purpose IO # 0 and 1 */
|
|
-#define SSB_SPROM8_GPIOA_P0 0x00FF /* Pin 0 */
|
|
-#define SSB_SPROM8_GPIOA_P1 0xFF00 /* Pin 1 */
|
|
-#define SSB_SPROM8_GPIOA_P1_SHIFT 8
|
|
-#define SSB_SPROM8_GPIOB 0x1098 /* Gen. Purpose IO # 2 and 3 */
|
|
-#define SSB_SPROM8_GPIOB_P2 0x00FF /* Pin 2 */
|
|
-#define SSB_SPROM8_GPIOB_P3 0xFF00 /* Pin 3 */
|
|
-#define SSB_SPROM8_GPIOB_P3_SHIFT 8
|
|
-#define SSB_SPROM8_RSSIPARM2G 0x10A4 /* RSSI params for 2GHz */
|
|
+#define SSB_SPROM8_RSSIPARM2G 0x00A4 /* RSSI params for 2GHz */
|
|
#define SSB_SPROM8_RSSISMF2G 0x000F
|
|
#define SSB_SPROM8_RSSISMC2G 0x00F0
|
|
#define SSB_SPROM8_RSSISMC2G_SHIFT 4
|
|
@@ -365,7 +366,7 @@
|
|
#define SSB_SPROM8_RSSISAV2G_SHIFT 8
|
|
#define SSB_SPROM8_BXA2G 0x1800
|
|
#define SSB_SPROM8_BXA2G_SHIFT 11
|
|
-#define SSB_SPROM8_RSSIPARM5G 0x10A6 /* RSSI params for 5GHz */
|
|
+#define SSB_SPROM8_RSSIPARM5G 0x00A6 /* RSSI params for 5GHz */
|
|
#define SSB_SPROM8_RSSISMF5G 0x000F
|
|
#define SSB_SPROM8_RSSISMC5G 0x00F0
|
|
#define SSB_SPROM8_RSSISMC5G_SHIFT 4
|
|
@@ -373,47 +374,47 @@
|
|
#define SSB_SPROM8_RSSISAV5G_SHIFT 8
|
|
#define SSB_SPROM8_BXA5G 0x1800
|
|
#define SSB_SPROM8_BXA5G_SHIFT 11
|
|
-#define SSB_SPROM8_TRI25G 0x10A8 /* TX isolation 2.4&5.3GHz */
|
|
+#define SSB_SPROM8_TRI25G 0x00A8 /* TX isolation 2.4&5.3GHz */
|
|
#define SSB_SPROM8_TRI2G 0x00FF /* TX isolation 2.4GHz */
|
|
#define SSB_SPROM8_TRI5G 0xFF00 /* TX isolation 5.3GHz */
|
|
#define SSB_SPROM8_TRI5G_SHIFT 8
|
|
-#define SSB_SPROM8_TRI5GHL 0x10AA /* TX isolation 5.2/5.8GHz */
|
|
+#define SSB_SPROM8_TRI5GHL 0x00AA /* TX isolation 5.2/5.8GHz */
|
|
#define SSB_SPROM8_TRI5GL 0x00FF /* TX isolation 5.2GHz */
|
|
#define SSB_SPROM8_TRI5GH 0xFF00 /* TX isolation 5.8GHz */
|
|
#define SSB_SPROM8_TRI5GH_SHIFT 8
|
|
-#define SSB_SPROM8_RXPO 0x10AC /* RX power offsets */
|
|
+#define SSB_SPROM8_RXPO 0x00AC /* RX power offsets */
|
|
#define SSB_SPROM8_RXPO2G 0x00FF /* 2GHz RX power offset */
|
|
#define SSB_SPROM8_RXPO5G 0xFF00 /* 5GHz RX power offset */
|
|
#define SSB_SPROM8_RXPO5G_SHIFT 8
|
|
-#define SSB_SPROM8_MAXP_BG 0x10C0 /* Max Power 2GHz in path 1 */
|
|
+#define SSB_SPROM8_MAXP_BG 0x00C0 /* Max Power 2GHz in path 1 */
|
|
#define SSB_SPROM8_MAXP_BG_MASK 0x00FF /* Mask for Max Power 2GHz */
|
|
#define SSB_SPROM8_ITSSI_BG 0xFF00 /* Mask for path 1 itssi_bg */
|
|
#define SSB_SPROM8_ITSSI_BG_SHIFT 8
|
|
-#define SSB_SPROM8_PA0B0 0x10C2 /* 2GHz power amp settings */
|
|
-#define SSB_SPROM8_PA0B1 0x10C4
|
|
-#define SSB_SPROM8_PA0B2 0x10C6
|
|
-#define SSB_SPROM8_MAXP_A 0x10C8 /* Max Power 5.3GHz */
|
|
+#define SSB_SPROM8_PA0B0 0x00C2 /* 2GHz power amp settings */
|
|
+#define SSB_SPROM8_PA0B1 0x00C4
|
|
+#define SSB_SPROM8_PA0B2 0x00C6
|
|
+#define SSB_SPROM8_MAXP_A 0x00C8 /* Max Power 5.3GHz */
|
|
#define SSB_SPROM8_MAXP_A_MASK 0x00FF /* Mask for Max Power 5.3GHz */
|
|
#define SSB_SPROM8_ITSSI_A 0xFF00 /* Mask for path 1 itssi_a */
|
|
#define SSB_SPROM8_ITSSI_A_SHIFT 8
|
|
-#define SSB_SPROM8_MAXP_AHL 0x10CA /* Max Power 5.2/5.8GHz */
|
|
+#define SSB_SPROM8_MAXP_AHL 0x00CA /* Max Power 5.2/5.8GHz */
|
|
#define SSB_SPROM8_MAXP_AH_MASK 0x00FF /* Mask for Max Power 5.8GHz */
|
|
#define SSB_SPROM8_MAXP_AL_MASK 0xFF00 /* Mask for Max Power 5.2GHz */
|
|
#define SSB_SPROM8_MAXP_AL_SHIFT 8
|
|
-#define SSB_SPROM8_PA1B0 0x10CC /* 5.3GHz power amp settings */
|
|
-#define SSB_SPROM8_PA1B1 0x10CE
|
|
-#define SSB_SPROM8_PA1B2 0x10D0
|
|
-#define SSB_SPROM8_PA1LOB0 0x10D2 /* 5.2GHz power amp settings */
|
|
-#define SSB_SPROM8_PA1LOB1 0x10D4
|
|
-#define SSB_SPROM8_PA1LOB2 0x10D6
|
|
-#define SSB_SPROM8_PA1HIB0 0x10D8 /* 5.8GHz power amp settings */
|
|
-#define SSB_SPROM8_PA1HIB1 0x10DA
|
|
-#define SSB_SPROM8_PA1HIB2 0x10DC
|
|
-#define SSB_SPROM8_CCK2GPO 0x1140 /* CCK power offset */
|
|
-#define SSB_SPROM8_OFDM2GPO 0x1142 /* 2.4GHz OFDM power offset */
|
|
-#define SSB_SPROM8_OFDM5GPO 0x1146 /* 5.3GHz OFDM power offset */
|
|
-#define SSB_SPROM8_OFDM5GLPO 0x114A /* 5.2GHz OFDM power offset */
|
|
-#define SSB_SPROM8_OFDM5GHPO 0x114E /* 5.8GHz OFDM power offset */
|
|
+#define SSB_SPROM8_PA1B0 0x00CC /* 5.3GHz power amp settings */
|
|
+#define SSB_SPROM8_PA1B1 0x00CE
|
|
+#define SSB_SPROM8_PA1B2 0x00D0
|
|
+#define SSB_SPROM8_PA1LOB0 0x00D2 /* 5.2GHz power amp settings */
|
|
+#define SSB_SPROM8_PA1LOB1 0x00D4
|
|
+#define SSB_SPROM8_PA1LOB2 0x00D6
|
|
+#define SSB_SPROM8_PA1HIB0 0x00D8 /* 5.8GHz power amp settings */
|
|
+#define SSB_SPROM8_PA1HIB1 0x00DA
|
|
+#define SSB_SPROM8_PA1HIB2 0x00DC
|
|
+#define SSB_SPROM8_CCK2GPO 0x0140 /* CCK power offset */
|
|
+#define SSB_SPROM8_OFDM2GPO 0x0142 /* 2.4GHz OFDM power offset */
|
|
+#define SSB_SPROM8_OFDM5GPO 0x0146 /* 5.3GHz OFDM power offset */
|
|
+#define SSB_SPROM8_OFDM5GLPO 0x014A /* 5.2GHz OFDM power offset */
|
|
+#define SSB_SPROM8_OFDM5GHPO 0x014E /* 5.8GHz OFDM power offset */
|
|
|
|
/* Values for SSB_SPROM1_BINF_CCODE */
|
|
enum {
|