mirror of
https://github.com/openwrt/openwrt.git
synced 2025-01-01 11:36:49 +00:00
bad01d4806
Removed because they are upstream: generic/pending-5.15/110-v6.3-0001-spidev-Add-Silicon-Labs-EM3581-device-compatible.patch https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?h=linux-5.15.y&id=bff165a3993683daddf3f00563960e7675966f91 ipq807x/patches-5.15/0004-v5.16-arm64-dts-qcom-msm8996-Move-clock-cells-to-QMP-PHY-c.patch https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?h=linux-5.15.y&id=32f0e52f16d45d743b473659329f93d4a27c68bf Manually adapted: bcm27xx/patches-5.15/950-0040-spi-spidev-Completely-disable-the-spidev-warning.patch bcm27xx/patches-5.15/950-0578-spi-spidev-Restore-loading-from-Device-Tree.patch generic/pending-5.15/110-v6.3-0002-spidev-Add-Silicon-Labs-SI3210-device-compatible.patch Adapt kernel configuration for newly added option CONFIG_ARM64_ERRATUM_3194386. The leddev_list_lock attribute changed from rwlock_t to spinlock_t in: https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?h=linux-5.15.y&id=590304b798a3b89e716b6b564f8ad14bc9373d93 Link: https://github.com/openwrt/openwrt/pull/16366 Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
98 lines
3.6 KiB
Diff
98 lines
3.6 KiB
Diff
From: Denis Kalashnikov <denis281089@gmail.com>
|
|
Subject: [PATCH] ath79: add support for reset key on MikroTik RB912UAG-2HPnD
|
|
|
|
On MikroTik RB91x board series a reset key shares SoC gpio
|
|
line #15 with NAND ALE and NAND IO7. So we need a custom
|
|
gpio driver to manage this non-trivial connection schema.
|
|
Also rb91x-nand needs to have an ability to disable a polling
|
|
of the key while it works with NAND.
|
|
|
|
While we've been integrating rb91x-key into a firmware, we've
|
|
figured out that:
|
|
* In the gpio-latch driver we need to add a "cansleep" suffix to
|
|
several gpiolib calls,
|
|
* When gpio-latch and rb91x-nand fail to get a gpio and an error
|
|
is -EPROBE_DEFER, they shouldn't report about this, since this
|
|
actually is not an error and occurs when the gpio-latch probe
|
|
function is called before the rb91x-key probe.
|
|
We fix these related things here too.
|
|
|
|
Submitted-by: Denis Kalashnikov <denis281089@gmail.com>
|
|
Reviewed-by: Sergey Ryazanov <ryazanov.s.a@gmail.com>
|
|
Tested-by: Koen Vandeputte <koen.vandeputte@ncentric.com>
|
|
---
|
|
drivers/gpio/Kconfig | 11 +++++++++++
|
|
drivers/gpio/Makefile | 2 ++
|
|
drivers/mtd/nand/raw/Kconfig | 6 ++++++
|
|
drivers/mtd/nand/raw/Makefile | 1 +
|
|
7 files changed, 20 insertions(+)
|
|
|
|
--- a/drivers/gpio/Kconfig
|
|
+++ b/drivers/gpio/Kconfig
|
|
@@ -353,6 +353,13 @@ config GPIO_IXP4XX
|
|
IXP4xx series of chips.
|
|
|
|
If unsure, say N.
|
|
+
|
|
+config GPIO_LATCH
|
|
+ tristate "MikroTik RouterBOARD GPIO latch support"
|
|
+ depends on ATH79
|
|
+ help
|
|
+ GPIO driver for latch on some MikroTik RouterBOARDs.
|
|
+
|
|
config GPIO_LOGICVC
|
|
tristate "Xylon LogiCVC GPIO support"
|
|
depends on MFD_SYSCON && OF
|
|
@@ -529,6 +536,10 @@ config GPIO_ROCKCHIP
|
|
help
|
|
Say yes here to support GPIO on Rockchip SoCs.
|
|
|
|
+config GPIO_RB91X_KEY
|
|
+ tristate "MikroTik RB91x board series reset key support"
|
|
+ depends on ATH79
|
|
+
|
|
config GPIO_SAMA5D2_PIOBU
|
|
tristate "SAMA5D2 PIOBU GPIO support"
|
|
depends on MFD_SYSCON
|
|
--- a/drivers/gpio/Makefile
|
|
+++ b/drivers/gpio/Makefile
|
|
@@ -75,6 +75,7 @@ obj-$(CONFIG_GPIO_IT87) += gpio-it87.o
|
|
obj-$(CONFIG_GPIO_IXP4XX) += gpio-ixp4xx.o
|
|
obj-$(CONFIG_GPIO_JANZ_TTL) += gpio-janz-ttl.o
|
|
obj-$(CONFIG_GPIO_KEMPLD) += gpio-kempld.o
|
|
+obj-$(CONFIG_GPIO_LATCH) += gpio-latch.o
|
|
obj-$(CONFIG_GPIO_LOGICVC) += gpio-logicvc.o
|
|
obj-$(CONFIG_GPIO_LOONGSON1) += gpio-loongson1.o
|
|
obj-$(CONFIG_GPIO_LOONGSON) += gpio-loongson.o
|
|
@@ -123,6 +124,7 @@ obj-$(CONFIG_GPIO_PMIC_EIC_SPRD) += gpio
|
|
obj-$(CONFIG_GPIO_PXA) += gpio-pxa.o
|
|
obj-$(CONFIG_GPIO_RASPBERRYPI_EXP) += gpio-raspberrypi-exp.o
|
|
obj-$(CONFIG_GPIO_RB4XX) += gpio-rb4xx.o
|
|
+obj-$(CONFIG_GPIO_RB91X_KEY) += gpio-rb91x-key.o
|
|
obj-$(CONFIG_GPIO_RC5T583) += gpio-rc5t583.o
|
|
obj-$(CONFIG_GPIO_RCAR) += gpio-rcar.o
|
|
obj-$(CONFIG_GPIO_RDA) += gpio-rda.o
|
|
--- a/drivers/mtd/nand/raw/Kconfig
|
|
+++ b/drivers/mtd/nand/raw/Kconfig
|
|
@@ -569,4 +569,10 @@ config MTD_NAND_RB4XX
|
|
Enables support for the NAND flash chip on Mikrotik Routerboard
|
|
RB4xx series.
|
|
|
|
+config MTD_NAND_RB91X
|
|
+ tristate "MikroTik RB91x NAND driver support"
|
|
+ depends on ATH79 && MTD_RAW_NAND
|
|
+ help
|
|
+ Enables support for the NAND flash chip on MikroTik RB91x series.
|
|
+
|
|
endif # MTD_RAW_NAND
|
|
--- a/drivers/mtd/nand/raw/Makefile
|
|
+++ b/drivers/mtd/nand/raw/Makefile
|
|
@@ -60,6 +60,7 @@ obj-$(CONFIG_MTD_NAND_ROCKCHIP) += rock
|
|
obj-$(CONFIG_MTD_NAND_PL35X) += pl35x-nand-controller.o
|
|
obj-$(CONFIG_MTD_NAND_AR934X) += ar934x_nand.o
|
|
obj-$(CONFIG_MTD_NAND_RB4XX) += nand_rb4xx.o
|
|
+obj-$(CONFIG_MTD_NAND_RB91X) += rb91x_nand.o
|
|
|
|
nand-objs := nand_base.o nand_legacy.o nand_bbt.o nand_timings.o nand_ids.o
|
|
nand-objs += nand_onfi.o
|