openwrt/target/linux/ramips/dts/mt7621_xiaomi_mi-router-cr660x.dtsi
Shiji Yang 01996b785d ramips: clean up useless dts partition labels
The previous NVMEM eeprom conversions[1][2] left a lot of partition
labels that were no longer used. They can be removed now.

[1] https://github.com/openwrt/openwrt/pull/13584
[2] https://github.com/openwrt/openwrt/pull/13587

Signed-off-by: Shiji Yang <yangshiji66@qq.com>
2024-02-21 13:31:18 +01:00

207 lines
3.3 KiB
Plaintext

// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
#include "mt7621.dtsi"
#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/input/input.h>
/ {
aliases {
led-boot = &led_sys_yellow;
led-failsafe = &led_sys_yellow;
led-running = &led_sys_blue;
led-upgrade = &led_sys_yellow;
label-mac-device = &gmac0;
};
chosen {
bootargs = "console=ttyS0,115200n8";
};
leds {
compatible = "gpio-leds";
led_sys_yellow: sys_yellow {
label = "yellow:sys";
gpios = <&gpio 14 GPIO_ACTIVE_LOW>;
};
led_sys_blue: sys_blue {
label = "blue:sys";
gpios = <&gpio 16 GPIO_ACTIVE_LOW>;
};
net_yellow {
label = "yellow:net";
gpios = <&gpio 13 GPIO_ACTIVE_LOW>;
};
net_blue {
label = "blue:net";
gpios = <&gpio 15 GPIO_ACTIVE_LOW>;
};
};
keys {
compatible = "gpio-keys";
reset {
label = "reset";
gpios = <&gpio 18 GPIO_ACTIVE_LOW>;
linux,code = <KEY_RESTART>;
};
wps {
label = "wps";
gpios = <&gpio 7 GPIO_ACTIVE_LOW>;
linux,code = <KEY_WPS_BUTTON>;
};
};
};
&nand {
status = "okay";
partitions {
compatible = "fixed-partitions";
#address-cells = <1>;
#size-cells = <1>;
partition@0 {
label = "Bootloader";
reg = <0x0 0x80000>;
read-only;
};
partition@80000 {
label = "Nvram";
reg = <0x80000 0x40000>;
read-only;
};
partition@c0000 {
label = "Bdata";
reg = <0xc0000 0x40000>;
read-only;
};
partition@100000 {
label = "Factory";
reg = <0x100000 0x80000>;
read-only;
nvmem-layout {
compatible = "fixed-layout";
#address-cells = <1>;
#size-cells = <1>;
eeprom_factory_0: eeprom@0 {
reg = <0x0 0xe00>;
};
macaddr_factory_3fff4: macaddr@3fff4 {
reg = <0x3fff4 0x6>;
};
macaddr_factory_3fffa: macaddr@3fffa {
reg = <0x3fffa 0x6>;
};
};
};
partition@180000 {
label = "crash";
reg = <0x180000 0x40000>;
read-only;
};
partition@1c0000 {
label = "crash_log";
reg = <0x1c0000 0x40000>;
read-only;
};
/* "kernel" and "ubi" partition is the result of
* squashing next consecutive stock partitions:
* 1. firmware 0x0200000 - 0x2000000 (Stock firmware 0)
* 2. firmware1 0x2000000 - 0x3e00000 (Stock firmware 1)
* 3. overlay 0x3e00000 - 0x7000000 (Stock fw Ubi overlay)
* 4. obr 0x7000000 - 0x8000000 (Unallocated?)
*/
partition@200000 {
label = "kernel";
reg = <0x200000 0x400000>;
};
partition@600000 {
label = "ubi";
reg = <0x600000 0x7980000>;
};
/*
* Leave 512 KiB for the bad block table
*/
};
};
&pcie {
status = "okay";
};
&pcie1 {
wifi@0,0 {
compatible = "mediatek,mt76";
reg = <0x0000 0 0 0 0>;
nvmem-cells = <&eeprom_factory_0>;
nvmem-cell-names = "eeprom";
mediatek,disable-radar-background;
};
};
&gmac0 {
nvmem-cells = <&macaddr_factory_3fff4>;
nvmem-cell-names = "mac-address";
};
&gmac1 {
status = "okay";
label = "wan";
phy-handle = <&ethphy4>;
nvmem-cells = <&macaddr_factory_3fffa>;
nvmem-cell-names = "mac-address";
};
&mdio {
ethphy4: ethernet-phy@4 {
reg = <4>;
};
};
&switch0 {
ports {
port@0 {
status = "okay";
label = "lan1";
};
port@1 {
status = "okay";
label = "lan2";
};
port@2 {
status = "okay";
label = "lan3";
};
};
};
&state_default {
gpio {
groups = "jtag", "uart3", "wdt";
function = "gpio";
};
};