mirror of
https://github.com/openwrt/openwrt.git
synced 2025-01-01 11:36:49 +00:00
8fa6107aee
This adds support for the Ubiquiti Picostation M (XM), which has the
same board/LEDs as the Bullet M XM, but different case and antennas.
Specifications:
- AR7241 SoC @ 400 MHz
- 32 MB RAM
- 8 MB SPI flash
- 1x 10/100 Mbps Ethernet, 24 Vdc PoE-in
- External antenna: 5 dBi (USA), 2 dBi (EU)
- POWER/LAN green LEDs
- 4x RSSI LEDs (red, orange, green, green)
- UART (115200 8N1) on PCB
Flashing via WebUI:
Upload the factory image via the stock firmware web UI.
Attention: airOS firmware versions >= 5.6 have a new bootloader with
an incompatible partition table!
Please downgrade to <= 5.5 _before_ flashing OpenWrt!
Refer to the device's Wiki page for further information.
Flashing via TFTP:
Same procedure as other NanoStation M boards.
- Use a pointy tool (e.g., pen cap, paper clip) and keep the reset
button on the device or on the PoE supply pressed
- Power on the device via PoE (keep reset button pressed)
- Keep pressing until LEDs flash alternatively LED1+LED3 =>
LED2+LED4 => LED1+LED3, etc.
- Release reset button
- The device starts a TFTP server at 192.168.1.20
- Set a static IP on the computer (e.g., 192.168.1.21/24)
- Upload via tftp the factory image:
$ tftp 192.168.1.20
tftp> bin
tftp> trace
tftp> put openwrt-ath79-generic-xxxxx-ubnt_picostation-m-squashfs-factory.bin
Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
(cherry picked from commit 6fdaf16dd0)
236 lines
5.3 KiB
Bash
236 lines
5.3 KiB
Bash
#!/bin/sh
|
|
|
|
[ -e /lib/firmware/$FIRMWARE ] && exit 0
|
|
|
|
. /lib/functions.sh
|
|
. /lib/functions/system.sh
|
|
|
|
ath9k_eeprom_die() {
|
|
echo "ath9k eeprom: " "$*"
|
|
exit 1
|
|
}
|
|
|
|
ath9k_eeprom_extract() {
|
|
local part=$1
|
|
local offset=$2
|
|
local count=$3
|
|
local mtd
|
|
|
|
mtd=$(find_mtd_chardev $part)
|
|
[ -n "$mtd" ] || \
|
|
ath9k_eeprom_die "no mtd device found for partition $part"
|
|
|
|
dd if=$mtd of=/lib/firmware/$FIRMWARE iflag=skip_bytes bs=$count skip=$offset count=1 2>/dev/null || \
|
|
ath9k_eeprom_die "failed to extract from $mtd"
|
|
}
|
|
|
|
ath9k_eeprom_extract_reverse() {
|
|
local part=$1
|
|
local offset=$2
|
|
local count=$3
|
|
local mtd
|
|
local reversed
|
|
local caldata
|
|
|
|
mtd=$(find_mtd_chardev "$part")
|
|
reversed=$(hexdump -v -s $offset -n $count -e '/1 "%02x "' $mtd)
|
|
|
|
for byte in $reversed; do
|
|
caldata="\x${byte}${caldata}"
|
|
done
|
|
|
|
printf "%b" "$caldata" > /lib/firmware/$FIRMWARE
|
|
}
|
|
|
|
xor() {
|
|
local val
|
|
local ret="0x$1"
|
|
local retlen=${#1}
|
|
|
|
shift
|
|
while [ -n "$1" ]; do
|
|
val="0x$1"
|
|
ret=$((ret ^ val))
|
|
shift
|
|
done
|
|
|
|
printf "%0${retlen}x" "$ret"
|
|
}
|
|
|
|
ath9k_patch_fw_mac() {
|
|
local mac=$1
|
|
local mac_offset=$2
|
|
local chksum_offset=$3
|
|
local xor_mac
|
|
local xor_fw_mac
|
|
local xor_fw_chksum
|
|
|
|
[ -z "$mac" -o -z "$mac_offset" ] && return
|
|
|
|
[ -n "$chksum_offset" ] && {
|
|
xor_mac=${mac//:/}
|
|
xor_mac="${xor_mac:0:4} ${xor_mac:4:4} ${xor_mac:8:4}"
|
|
|
|
xor_fw_mac=$(hexdump -v -n 6 -s $mac_offset -e '/1 "%02x"' /lib/firmware/$FIRMWARE)
|
|
xor_fw_mac="${xor_fw_mac:0:4} ${xor_fw_mac:4:4} ${xor_fw_mac:8:4}"
|
|
|
|
xor_fw_chksum=$(hexdump -v -n 2 -s $chksum_offset -e '/1 "%02x"' /lib/firmware/$FIRMWARE)
|
|
xor_fw_chksum=$(xor $xor_fw_chksum $xor_fw_mac $xor_mac)
|
|
|
|
printf "%b" "\x${xor_fw_chksum:0:2}\x${xor_fw_chksum:2:2}" | \
|
|
dd of=/lib/firmware/$FIRMWARE conv=notrunc bs=1 seek=$chksum_offset count=2
|
|
}
|
|
|
|
macaddr_2bin $mac | dd of=/lib/firmware/$FIRMWARE conv=notrunc oflag=seek_bytes bs=6 seek=$mac_offset count=1
|
|
}
|
|
|
|
ath9k_patch_fw_mac_crc() {
|
|
local mac=$1
|
|
local mac_offset=$2
|
|
local chksum_offset=$((mac_offset - 10))
|
|
|
|
ath9k_patch_fw_mac "${mac}" "${mac_offset}" "${chksum_offset}"
|
|
}
|
|
|
|
board=$(board_name)
|
|
|
|
case "$FIRMWARE" in
|
|
"ath9k-eeprom-ahb-18100000.wmac.bin")
|
|
case $board in
|
|
avm,fritz4020)
|
|
ath9k_eeprom_extract_reverse "urlader" 5441 1088
|
|
;;
|
|
dlink,dir-825-c1|\
|
|
dlink,dir-835-a1)
|
|
ath9k_eeprom_extract "art" 4096 1088
|
|
ath9k_patch_fw_mac $(mtd_get_mac_text "mac" 4) 2
|
|
;;
|
|
dlink,dir-859-a1|\
|
|
nec,wg1200cr|\
|
|
wd,mynet-n750)
|
|
ath9k_eeprom_extract "art" 4096 1088
|
|
ath9k_patch_fw_mac $(mtd_get_mac_ascii devdata "wlan24mac") 2
|
|
;;
|
|
engenius,ecb1750)
|
|
ath9k_eeprom_extract "art" 4096 1088
|
|
ath9k_patch_fw_mac $(macaddr_add $(mtd_get_mac_ascii u-boot-env "athaddr") +1) 2
|
|
;;
|
|
engenius,epg5000|\
|
|
iodata,wn-ac1167dgr|\
|
|
iodata,wn-ac1600dgr|\
|
|
iodata,wn-ac1600dgr2|\
|
|
iodata,wn-ag300dgr)
|
|
ath9k_eeprom_extract "art" 4096 1088
|
|
ath9k_patch_fw_mac $(mtd_get_mac_ascii u-boot-env ethaddr) 2
|
|
;;
|
|
nec,wg800hp)
|
|
ath9k_eeprom_extract "art" 4096 1088
|
|
ath9k_patch_fw_mac $(mtd_get_mac_text board_data 1664) 2
|
|
;;
|
|
*)
|
|
ath9k_eeprom_die "board $board is not supported yet"
|
|
;;
|
|
esac
|
|
;;
|
|
"ath9k-eeprom-pci-0000:00:00.0.bin")
|
|
case $board in
|
|
avm,fritz300e)
|
|
ath9k_eeprom_extract_reverse "urloader" 5441 1088
|
|
;;
|
|
buffalo,whr-g301n|\
|
|
buffalo,wzr-hp-g302h-a1a0|\
|
|
tplink,tl-wr841-v5|\
|
|
tplink,tl-wr941-v4)
|
|
ath9k_eeprom_extract "art" 4096 3768
|
|
;;
|
|
buffalo,wzr-hp-g450h)
|
|
ath9k_eeprom_extract "art" 4096 1088
|
|
;;
|
|
dlink,dir-825-c1|\
|
|
dlink,dir-835-a1)
|
|
ath9k_eeprom_extract "art" 20480 1088
|
|
ath9k_patch_fw_mac $(macaddr_add $(mtd_get_mac_text "mac" 24) 1) 2
|
|
;;
|
|
ocedo,raccoon|\
|
|
tplink,tl-wdr3600-v1|\
|
|
tplink,tl-wdr4300-v1|\
|
|
tplink,tl-wdr4300-v1-il|\
|
|
tplink,tl-wdr4900-v2|\
|
|
winchannel,wb2000)
|
|
ath9k_eeprom_extract "art" 20480 1088
|
|
;;
|
|
netgear,wnr612-v2|\
|
|
on,n150r|\
|
|
pcs,cap324|\
|
|
tplink,tl-mr3220-v1|\
|
|
tplink,tl-mr3420-v1|\
|
|
tplink,tl-wr2543-v1|\
|
|
tplink,tl-wr740n-v1|\
|
|
tplink,tl-wr740n-v3|\
|
|
tplink,tl-wr741-v1|\
|
|
tplink,tl-wr743nd-v1|\
|
|
tplink,tl-wr841-v7|\
|
|
tplink,tl-wr842n-v1|\
|
|
ubnt,airrouter|\
|
|
ubnt,bullet-m|\
|
|
ubnt,nanostation-loco-m|\
|
|
ubnt,nanostation-m|\
|
|
ubnt,picostation-m|\
|
|
ubnt,rocket-m)
|
|
ath9k_eeprom_extract "art" 4096 4096
|
|
;;
|
|
pqi,air-pen)
|
|
ath9k_eeprom_extract "art" 4096 2002
|
|
;;
|
|
ubnt,unifi)
|
|
ath9k_eeprom_extract "art" 4096 2048
|
|
;;
|
|
wd,mynet-n750)
|
|
ath9k_eeprom_extract "art" 20480 1088
|
|
ath9k_patch_fw_mac $(mtd_get_mac_ascii devdata "wlan5mac") 2
|
|
;;
|
|
wd,mynet-wifi-rangeextender)
|
|
ath9k_eeprom_extract "art" 4096 4096
|
|
ath9k_patch_fw_mac $(nvram get wl0_hwaddr) 2
|
|
;;
|
|
*)
|
|
ath9k_eeprom_die "board $board is not supported yet"
|
|
;;
|
|
esac
|
|
;;
|
|
"ath9k-eeprom-pci-0000:00:11.0.bin")
|
|
case $board in
|
|
buffalo,wzr-hp-ag300h|\
|
|
netgear,wndr3700|\
|
|
netgear,wndr3700v2|\
|
|
netgear,wndr3800)
|
|
ath9k_eeprom_extract "art" 4096 3768
|
|
;;
|
|
dlink,dir-825-b1)
|
|
ath9k_eeprom_extract "caldata" 4096 3768
|
|
ath9k_patch_fw_mac_crc $(mtd_get_mac_text "caldata" 65440) 524
|
|
;;
|
|
*)
|
|
ath9k_eeprom_die "board $board is not supported yet"
|
|
;;
|
|
esac
|
|
;;
|
|
"ath9k-eeprom-pci-0000:00:12.0.bin")
|
|
case $board in
|
|
buffalo,wzr-hp-ag300h|\
|
|
netgear,wndr3700|\
|
|
netgear,wndr3700v2|\
|
|
netgear,wndr3800)
|
|
ath9k_eeprom_extract "art" 20480 3768
|
|
;;
|
|
dlink,dir-825-b1)
|
|
ath9k_eeprom_extract "caldata" 20480 3768
|
|
ath9k_patch_fw_mac_crc $(macaddr_add $(mtd_get_mac_text "caldata" 65460) 1) 524
|
|
;;
|
|
*)
|
|
ath9k_eeprom_die "board $board is not supported yet"
|
|
;;
|
|
esac
|
|
;;
|
|
esac
|