mirror of
https://github.com/openwrt/openwrt.git
synced 2024-12-27 09:12:39 +00:00
4d49ce1bde
Booting from non-MMC devices on Rockchip targets without this change results in a boot failure: Model: FriendlyElec NanoPi R5S Net: eth0: ethernet@fe2a0000 Hit any key to stop autoboot: 0 ** Booting bootflow 'nvme#0.blk#1.bootdev.part_1' with script ** No partition table - mmc 0 ** ** No partition table - mmc 0 ** Couldn't find partition mmc 0:1 Can't set block device Wrong Image Type for bootm command ERROR -91: Protocol wrong type for socket: can't get kernel image! Boot failed (err=1) This change fixes the default boot script for Rockchip targets to support booting from non-MMC devices such as NVMe or USB drives. Some targets with only a boot rom (e.g. NanoPi R5S) may require u-boot to be installed on the eMMC or a MicroSD card in order to boot from non-MMC devices. Fixes: #14420 Reviewed-by: Tianling Shen <cnsztl@immortalwrt.org> Signed-off-by: Justin Klaassen <justin@tidylabs.app>
16 lines
476 B
Plaintext
16 lines
476 B
Plaintext
part uuid ${devtype} ${devnum}:2 uuid
|
|
|
|
if test $stdout = 'serial@fe660000' ;
|
|
then serial_addr=',0xfe660000';
|
|
elif test $stdout = 'serial@ff130000' ;
|
|
then serial_addr=',0xff130000';
|
|
elif test $stdout = 'serial@ff1a0000' ;
|
|
then serial_addr=',0xff1a0000';
|
|
fi;
|
|
|
|
setenv bootargs "console=ttyS2,1500000 console=tty1 earlycon=uart8250,mmio32${serial_addr} swiotlb=1 root=PARTUUID=${uuid} rw rootwait";
|
|
|
|
load ${devtype} ${devnum}:1 ${kernel_addr_r} kernel.img
|
|
|
|
bootm ${kernel_addr_r}
|