openwrt/target/linux/ramips/dts/rt3050_arcwireless_freestation5.dts
Rosen Penev 5f479a4f34
ramips: rtxxxx: convert to nvmem-layout
Allows replacing mac-adress-increment.

Signed-off-by: Rosen Penev <rosenp@gmail.com>
2023-11-25 23:39:47 +01:00

127 lines
2.2 KiB
Plaintext

#include "rt3050.dtsi"
#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/input/input.h>
/ {
compatible = "arcwireless,freestation5", "ralink,rt3050-soc";
model = "ARC FreeStation5";
chosen {
bootargs = "console=ttyS0,115200";
};
flash@1f000000 {
compatible = "cfi-flash";
reg = <0x1f000000 0x800000>;
bank-width = <2>;
device-width = <2>;
partitions {
compatible = "fixed-partitions";
#address-cells = <1>;
#size-cells = <1>;
partition@0 {
label = "u-boot";
reg = <0x0 0x30000>;
read-only;
};
partition@30000 {
label = "u-boot-env";
reg = <0x30000 0x10000>;
read-only;
};
factory: partition@40000 {
label = "factory";
reg = <0x40000 0x10000>;
read-only;
nvmem-layout {
compatible = "fixed-layout";
#address-cells = <1>;
#size-cells = <1>;
eeprom_factory_0: eeprom@0 {
reg = <0x0 0x200>;
};
macaddr_factory_4: macaddr@4 {
reg = <0x4 0x6>;
};
};
};
partition@50000 {
compatible = "denx,uimage";
label = "firmware";
reg = <0x50000 0x7b0000>;
};
};
};
gpio-export {
compatible = "gpio-export";
/*
* Used to enable power-over-ethernet passthrough from port0 to port1.
* Disable passthrough by default to prevent accidental equipment damage.
*/
poe {
gpio-export,name = "poe-passthrough";
gpio-export,output = <1>;
gpios = <&gpio0 11 GPIO_ACTIVE_LOW>;
};
};
leds {
compatible = "gpio-leds";
/*
* The following leds are defined in the ArcOS firmware, but reportedly
* not present in the Freestation5 device.
*/
wifi {
label = "unknown:wifi";
gpios = <&gpio0 7 GPIO_ACTIVE_LOW>;
};
powerg {
label = "unknown:powerg";
gpios = <&gpio0 9 GPIO_ACTIVE_LOW>;
};
usb {
label = "unknown:usb";
gpios = <&gpio0 14 GPIO_ACTIVE_LOW>;
};
};
};
&state_default {
gpio {
groups = "spi", "i2c", "jtag", "rgmii", "mdio", "uartf";
function = "gpio";
};
};
&ethernet {
nvmem-cells = <&macaddr_factory_4>;
nvmem-cell-names = "mac-address";
};
&esw {
mediatek,portmap = <0x01>;
};
&wmac {
nvmem-cells = <&eeprom_factory_0>;
nvmem-cell-names = "eeprom";
};
&otg {
status = "okay";
};