openwrt/target/linux/ramips/dts/mt7621_netgear_eax12.dts
Christian Marangi 19c45b95db
ramips: convert to new LED color/function format where possible
Initial conversion to new LED color/function format
and drop label format where possible. The same label
is composed at runtime.

Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
2024-02-07 14:48:43 +01:00

209 lines
3.4 KiB
Plaintext

// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
#include "mt7621.dtsi"
#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/input/input.h>
#include <dt-bindings/leds/common.h>
/ {
compatible = "netgear,eax12", "mediatek,mt7621-soc";
model = "Netgear EAX12";
aliases {
led-boot = &led_power_green;
led-failsafe = &led_power_red;
led-running = &led_power_green;
led-upgrade = &led_power_red;
};
chosen {
bootargs = "console=ttyS0,115200";
};
keys {
compatible = "gpio-keys";
reset {
label = "reset";
gpios = <&gpio 15 GPIO_ACTIVE_LOW>;
linux,code = <KEY_RESTART>;
};
wps {
label = "wps";
gpios = <&gpio 8 GPIO_ACTIVE_LOW>;
linux,code = <KEY_WPS_BUTTON>;
};
};
leds {
compatible = "gpio-leds";
led_power_green: power_green {
function = LED_FUNCTION_POWER;
color = <LED_COLOR_ID_GREEN>;
gpios = <&gpio 16 GPIO_ACTIVE_LOW>;
};
led_power_red: power_red {
function = LED_FUNCTION_POWER;
color = <LED_COLOR_ID_RED>;
gpios = <&gpio 7 GPIO_ACTIVE_LOW>;
};
client_green {
label = "green:client";
gpios = <&gpio 13 GPIO_ACTIVE_LOW>;
};
client_red {
label = "red:client";
gpios = <&gpio 14 GPIO_ACTIVE_LOW>;
};
router_green {
label = "green:router";
gpios = <&gpio 5 GPIO_ACTIVE_HIGH>;
};
router_red {
label = "red:router";
gpios = <&gpio 11 GPIO_ACTIVE_HIGH>;
};
wps_green {
function = LED_FUNCTION_WPS;
color = <LED_COLOR_ID_GREEN>;
gpios = <&gpio 17 GPIO_ACTIVE_HIGH>;
};
eth_green {
label = "green:eth";
gpios = <&gpio 10 GPIO_ACTIVE_LOW>;
};
eth_yellow {
label = "yellow:eth";
gpios = <&gpio 12 GPIO_ACTIVE_LOW>;
};
};
};
&nand {
status = "okay";
partitions {
compatible = "fixed-partitions";
#address-cells = <1>;
#size-cells = <1>;
partition@0 {
label = "Bootloader";
reg = <0x0 0x80000>;
read-only;
};
partition@80000 {
label = "Config";
reg = <0x80000 0x80000>;
read-only;
};
factory: partition@100000 {
label = "Factory";
reg = <0x100000 0x80000>;
read-only;
nvmem-layout {
compatible = "fixed-layout";
#address-cells = <1>;
#size-cells = <1>;
eeprom_factory_0: eeprom@0 {
reg = <0x0 0xe00>;
};
precal_factory_e10: precal@e10 {
reg = <0xe10 0x19c10>;
};
};
};
partition@180000 {
label = "firmware";
reg = <0x180000 0x3800000>;
compatible = "fixed-partitions";
#address-cells = <1>;
#size-cells = <1>;
partition@0 {
label = "kernel";
reg = <0x0 0x400000>;
};
partition@400000 {
label = "ubi";
reg = <0x400000 0x3400000>;
};
};
partition@2780000 {
label = "firmware_backup";
reg = <0x3980000 0x3800000>;
read-only;
};
partition@4d80000 {
label = "CFG";
reg = <0x7180000 0x200000>;
read-only;
};
partition@5580000 {
label = "RAE";
reg = <0x7380000 0x600000>;
read-only;
};
partition@5980000 {
label = "POT";
reg = <0x7980000 0x020000>;
read-only;
};
partition@6780000 {
label = "LOG";
reg = <0x79A0000 0x40000>;
read-only;
};
};
};
&pcie {
status = "okay";
};
&pcie1 {
wifi@0,0 {
compatible = "mediatek,mt76";
reg = <0x0000 0 0 0 0>;
nvmem-cells = <&eeprom_factory_0>, <&precal_factory_e10>;
nvmem-cell-names = "eeprom", "precal";
};
};
&switch0 {
ports {
port@0 {
status = "okay";
label = "lan";
};
};
};
&xhci {
status = "disabled";
};