openwrt/target/linux/ramips/dts/mt7621_linksys_e5600.dts
Christian Marangi 19c45b95db
ramips: convert to new LED color/function format where possible
Initial conversion to new LED color/function format
and drop label format where possible. The same label
is composed at runtime.

Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
2024-02-07 14:48:43 +01:00

211 lines
3.2 KiB
Plaintext

// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
#include "mt7621.dtsi"
#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/input/input.h>
#include <dt-bindings/leds/common.h>
/ {
compatible = "linksys,e5600", "mediatek,mt7621-soc";
model = "Linksys E5600";
aliases {
led-boot = &led_power;
led-failsafe = &led_power;
led-running = &led_power;
led-upgrade = &led_power;
};
chosen {
bootargs = "console=ttyS0,115200";
};
keys {
compatible = "gpio-keys";
reset {
label = "reset";
gpios = <&gpio 12 GPIO_ACTIVE_LOW>;
linux,code = <KEY_RESTART>;
};
wps {
label = "wps";
gpios = <&gpio 17 GPIO_ACTIVE_LOW>;
linux,code = <KEY_WPS_BUTTON>;
};
};
leds {
compatible = "gpio-leds";
wps {
function = LED_FUNCTION_WPS;
color = <LED_COLOR_ID_AMBER>;
gpios = <&gpio 5 GPIO_ACTIVE_HIGH>;
};
led_power: power {
function = LED_FUNCTION_POWER;
color = <LED_COLOR_ID_BLUE>;
gpios = <&gpio 10 GPIO_ACTIVE_HIGH>;
default-state = "on";
};
wan_amber {
function = LED_FUNCTION_WAN;
color = <LED_COLOR_ID_AMBER>;
gpios = <&gpio 13 GPIO_ACTIVE_HIGH>;
};
wan_blue {
function = LED_FUNCTION_WAN;
color = <LED_COLOR_ID_BLUE>;
gpios = <&gpio 15 GPIO_ACTIVE_HIGH>;
};
};
};
&nand {
status = "okay";
partitions {
compatible = "fixed-partitions";
#address-cells = <1>;
#size-cells = <1>;
partition@0 {
label = "boot";
reg = <0x0 0x80000>;
read-only;
};
partition@80000 {
label = "u_env";
reg = <0x80000 0x40000>;
read-only;
};
factory: partition@c0000 {
label = "factory";
reg = <0xc0000 0x40000>;
read-only;
nvmem-layout {
compatible = "fixed-layout";
#address-cells = <1>;
#size-cells = <1>;
eeprom_factory_0: eeprom@0 {
reg = <0x0 0x400>;
};
eeprom_factory_8000: eeprom@8000 {
reg = <0x8000 0x4da8>;
};
};
};
partition@100000 {
label = "s_env";
reg = <0x100000 0x40000>;
};
partition@140000 {
label = "devinfo";
reg = <0x140000 0x40000>;
read-only;
};
partition@180000 {
label = "kernel";
reg = <0x180000 0x400000>;
};
partition@580000 {
label = "ubi";
reg = <0x580000 0x1a00000>;
};
partition@1f80000 {
label = "alt_firmware";
reg = <0x1f80000 0x1e00000>;
};
partition@3d80000 {
label = "gdata";
reg = <0x3d80000 0x4200000>;
};
};
};
&state_default {
gpio {
groups = "uart2", "uart3", "jtag";
function = "gpio";
};
};
&pcie {
status = "okay";
};
&pcie0 {
mt76@0,0 {
compatible = "mediatek,mt76";
reg = <0x0000 0 0 0 0>;
nvmem-cells = <&eeprom_factory_0>;
nvmem-cell-names = "eeprom";
};
};
&pcie1 {
mt76@0,0 {
compatible = "mediatek,mt76";
reg = <0x0000 0 0 0 0>;
nvmem-cells = <&eeprom_factory_8000>;
nvmem-cell-names = "eeprom";
};
};
&gmac1 {
status = "okay";
label = "wan";
phy-handle = <&ethphy4>;
};
&mdio {
ethphy4: ethernet-phy@4 {
reg = <4>;
};
};
&switch0 {
ports {
port@0 {
status = "okay";
label = "lan1";
};
port@1 {
status = "okay";
label = "lan2";
};
port@2 {
status = "okay";
label = "lan3";
};
port@3 {
status = "okay";
label = "lan4";
};
};
};
&xhci {
status = "disabled";
};