openwrt/target/linux/ramips/dts/mt7621_h3c_tx180x.dtsi
Christian Marangi 7630c052c4
ramips: drop redundant label with new LED color/function format
Drop redundant label with new LED color/function format declared.
This was needed previously when the new format wasn't supported by
leds.sh functions script. Now that is supported this property
can be removed in favor of the new format.

Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
2024-02-07 14:48:43 +01:00

179 lines
2.8 KiB
Plaintext

// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
#include "mt7621.dtsi"
#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/input/input.h>
#include <dt-bindings/leds/common.h>
/ {
aliases {
led-boot = &led_status_amber;
led-failsafe = &led_status_green;
led-running = &led_status_green;
led-upgrade = &led_status_amber;
};
chosen {
bootargs = "console=ttyS0,115200";
bootargs-override = "console=ttyS0,115200";
};
keys {
compatible = "gpio-keys";
reset {
label = "reset";
gpios = <&gpio 13 GPIO_ACTIVE_LOW>;
linux,code = <KEY_RESTART>;
};
wps {
label = "wps";
gpios = <&gpio 14 GPIO_ACTIVE_LOW>;
linux,code = <KEY_WPS_BUTTON>;
};
};
leds {
compatible = "gpio-leds";
led_status_amber: led-0 {
color = <LED_COLOR_ID_AMBER>;
function = LED_FUNCTION_STATUS;
gpios = <&gpio 15 GPIO_ACTIVE_LOW>;
};
led_status_green: led-1 {
color = <LED_COLOR_ID_GREEN>;
function = LED_FUNCTION_STATUS;
gpios = <&gpio 16 GPIO_ACTIVE_LOW>;
};
};
};
&gmac1 {
status = "okay";
label = "wan";
phy-handle = <&ethphy4>;
};
&mdio {
ethphy4: ethernet-phy@4 {
reg = <4>;
};
};
&nand {
status = "okay";
mediatek,nmbm;
mediatek,bmt-max-ratio = <1>;
mediatek,bmt-max-reserved-blocks = <64>;
mediatek,bmt-remap-range = <0x0000000 0x0a00000>;
partitions {
compatible = "fixed-partitions";
#address-cells = <1>;
#size-cells = <1>;
partition@0 {
label = "u-boot";
reg = <0x0000000 0x0080000>;
read-only;
};
partition@80000 {
label = "u-boot-env";
reg = <0x0080000 0x0080000>;
};
partition@100000 {
label = "exp";
reg = <0x0100000 0x0080000>;
read-only;
};
factory: partition@180000 {
label = "factory";
reg = <0x0180000 0x0080000>;
read-only;
nvmem-layout {
compatible = "fixed-layout";
#address-cells = <1>;
#size-cells = <1>;
eeprom_factory_0: eeprom@0 {
reg = <0x0 0xe00>;
};
};
};
partition@200000 {
label = "firmware";
reg = <0x0200000 0x7600000>;
compatible = "fixed-partitions";
#address-cells = <1>;
#size-cells = <1>;
partition@0 {
label = "kernel";
reg = <0x0000000 0x0800000>;
};
partition@800000 {
label = "ubi";
reg = <0x0800000 0x6e00000>;
};
};
/* last 8 MiB is reserved for NMBM bad block table */
};
};
&pcie {
status = "okay";
};
&pcie1 {
wifi@0,0 {
compatible = "mediatek,mt76";
reg = <0x0000 0 0 0 0>;
nvmem-cells = <&eeprom_factory_0>;
nvmem-cell-names = "eeprom";
mediatek,disable-radar-background;
};
};
&state_default {
gpio {
groups = "jtag";
function = "gpio";
};
};
&switch0 {
ports {
port@1 {
status = "okay";
label = "lan1";
};
port@2 {
status = "okay";
label = "lan2";
};
port@3 {
status = "okay";
label = "lan3";
};
};
};
&xhci {
status = "disabled";
};