openwrt/target/linux/ramips/dts/mt7621_buffalo_wsr-2533dhpl.dts
Christian Marangi 19c45b95db
ramips: convert to new LED color/function format where possible
Initial conversion to new LED color/function format
and drop label format where possible. The same label
is composed at runtime.

Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
2024-02-07 14:48:43 +01:00

266 lines
4.3 KiB
Plaintext

// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
#include "mt7621.dtsi"
#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/input/input.h>
#include <dt-bindings/leds/common.h>
/ {
compatible = "buffalo,wsr-2533dhpl", "mediatek,mt7621-soc";
model = "Buffalo WSR-2533DHPL";
aliases {
led-boot = &led_power;
led-failsafe = &led_diag;
led-running = &led_power;
led-upgrade = &led_power;
label-mac-device = &gmac0;
};
leds {
compatible = "gpio-leds";
internet_green {
label = "green:internet";
gpios = <&gpio 41 GPIO_ACTIVE_LOW>;
};
router_green {
label = "green:router";
gpios = <&gpio 42 GPIO_ACTIVE_LOW>;
};
router_amber {
label = "amber:router";
gpios = <&gpio 43 GPIO_ACTIVE_LOW>;
};
internet_amber {
label = "amber:internet";
gpios = <&gpio 44 GPIO_ACTIVE_LOW>;
};
wireless_amber {
label = "amber:wireless";
gpios = <&gpio 45 GPIO_ACTIVE_LOW>;
};
led_power: power {
function = LED_FUNCTION_POWER;
color = <LED_COLOR_ID_GREEN>;
gpios = <&gpio 46 GPIO_ACTIVE_LOW>;
};
led_diag: diag {
label = "amber:diag";
gpios = <&gpio 47 GPIO_ACTIVE_LOW>;
};
wireless_green {
label = "green:wireless";
gpios = <&gpio 48 GPIO_ACTIVE_LOW>;
};
};
keys {
compatible = "gpio-keys";
reset {
label = "reset";
gpios = <&gpio 3 GPIO_ACTIVE_LOW>;
linux,code = <KEY_RESTART>;
};
aoss {
label = "aoss";
gpios = <&gpio 6 GPIO_ACTIVE_LOW>;
linux,code = <KEY_WPS_BUTTON>;
};
auto {
label = "auto";
gpios = <&gpio 7 GPIO_ACTIVE_LOW>;
linux,code = <BTN_0>;
linux,input-type = <EV_SW>;
};
bridge {
label = "wb";
gpios = <&gpio 10 GPIO_ACTIVE_LOW>;
linux,code = <BTN_1>;
linux,input-type = <EV_SW>;
};
router {
label = "router";
gpios = <&gpio 12 GPIO_ACTIVE_LOW>;
linux,code = <BTN_1>;
linux,input-type = <EV_SW>;
};
power {
label = "power";
gpios = <&gpio 18 GPIO_ACTIVE_HIGH>;
linux,code = <KEY_POWER>;
};
};
};
&spi0 {
status = "okay";
flash@0 {
compatible = "jedec,spi-nor";
reg = <0>;
spi-max-frequency = <40000000>;
partitions {
compatible = "fixed-partitions";
#address-cells = <1>;
#size-cells = <1>;
partition@0 {
label = "u-boot";
reg = <0x0 0x30000>;
read-only;
};
partition@30000 {
label = "u-boot-env";
reg = <0x30000 0x10000>;
read-only;
};
factory: partition@40000 {
label = "factory";
reg = <0x40000 0x10000>;
read-only;
nvmem-layout {
compatible = "fixed-layout";
#address-cells = <1>;
#size-cells = <1>;
eeprom_factory_0: eeprom@0 {
reg = <0x0 0x4da8>;
};
eeprom_factory_8000: eeprom@8000 {
reg = <0x8000 0x4da8>;
};
macaddr_factory_4: macaddr@4 {
compatible = "mac-base";
reg = <0x4 0x6>;
#nvmem-cell-cells = <1>;
};
};
};
partition@50000 {
compatible = "openwrt,trx";
label = "firmware";
reg = <0x50000 0x7c0000>;
};
partition@810000 {
label = "Kernel2";
reg = <0x810000 0x7c0000>;
read-only;
};
partition@fd0000 {
label = "glbcfg";
reg = <0xfd0000 0x010000>;
read-only;
};
partition@fe0000 {
label = "board_data";
reg = <0xfe0000 0x20000>;
read-only;
};
};
};
};
&gmac0 {
nvmem-cells = <&macaddr_factory_4 (-1)>;
nvmem-cell-names = "mac-address";
};
&gmac1 {
status = "okay";
label = "wan";
phy-handle = <&ethphy0>;
nvmem-cells = <&macaddr_factory_4 (-1)>;
nvmem-cell-names = "mac-address";
};
&mdio {
ethphy0: ethernet-phy@0 {
reg = <0>;
};
};
&switch0 {
ports {
port@1 {
status = "okay";
label = "lan4";
};
port@2 {
status = "okay";
label = "lan3";
};
port@3 {
status = "okay";
label = "lan2";
};
port@4 {
status = "okay";
label = "lan1";
};
};
};
&pcie {
status = "okay";
};
&pcie0 {
wifi@0,0 {
compatible = "mediatek,mt76";
reg = <0x0000 0 0 0 0>;
nvmem-cells = <&eeprom_factory_0>;
nvmem-cell-names = "eeprom";
ieee80211-freq-limit = <2400000 2500000>;
};
};
&pcie1 {
wifi@0,0 {
compatible = "mediatek,mt76";
reg = <0x0000 0 0 0 0>;
nvmem-cells = <&eeprom_factory_8000>;
nvmem-cell-names = "eeprom";
ieee80211-freq-limit = <5000000 6000000>;
};
};
&state_default {
gpio {
groups = "i2c", "uart2", "uart3", "wdt", "sdhci";
function = "gpio";
};
};
&xhci {
status = "disabled";
};