openwrt/target/linux/bcm63xx/dts/bcm6362-huawei-hg253s-v2.dts
Christian Marangi 4a8928526e
bcm63xx: convert to new LED color/function format where possible
Initial conversion to new LED color/function format
and drop label format where possible. The same label
is composed at runtime.

Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
2024-02-07 14:48:35 +01:00

179 lines
2.6 KiB
Plaintext

#include "bcm6362.dtsi"
#include <dt-bindings/input/input.h>
#include <dt-bindings/leds/common.h>
/ {
model = "Huawei HG253s v2";
compatible = "huawei,hg253s-v2", "brcm,bcm6362";
aliases {
led-boot = &led_phone_green;
led-failsafe = &led_phone_green;
led-upgrade = &led_phone_green;
};
chosen {
bootargs = "rootfstype=squashfs,ubifs noinitrd console=ttyS0,115200";
stdout-path = "serial0:115200n8";
};
keys {
compatible = "gpio-keys-polled";
#address-cells = <1>;
#size-cells = <0>;
poll-interval = <20>;
reset {
label = "reset";
gpios = <&pinctrl 24 1>;
linux,code = <KEY_RESTART>;
debounce-interval = <60>;
};
wlan {
label = "wlan";
gpios = <&pinctrl 25 1>;
linux,code = <KEY_WLAN>;
debounce-interval = <60>;
};
wps {
label = "wps";
gpios = <&pinctrl 26 1>;
linux,code = <KEY_WPS_BUTTON>;
debounce-interval = <60>;
};
};
leds {
compatible = "gpio-leds";
led_phone_green: led@28 {
label = "green:phone";
gpios = <&pinctrl 28 1>;
};
led@30 {
function = LED_FUNCTION_USB;
color = <LED_COLOR_ID_GREEN>;
gpios = <&pinctrl 30 1>;
};
};
};
&leds {
status = "okay";
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_leds>;
led@3 {
reg = <3>;
active-low;
label = "green:internet";
};
led@5 {
reg = <5>;
active-low;
label = "green:wifi";
};
};
&lsspi {
switch@0 {
compatible = "brcm,bcm53125";
reg = <0>;
spi-max-frequency = <781000>;
lede,alias = "eth0";
ports {
#address-cells = <1>;
#size-cells = <0>;
lan@1 {
reg = <1>;
label = "lan4";
};
lan@2 {
reg = <2>;
label = "lan3";
};
lan@3 {
reg = <3>;
label = "lan2";
};
lan@4 {
reg = <4>;
label = "lan1";
};
cpu@8 {
reg = <8>;
label = "cpu";
fixed-link {
speed = <1000>;
full-duplex;
asym-pause;
pause;
};
};
};
};
};
&nflash {
status = "okay";
nandcs@0 {
compatible = "brcm,nandcs";
#size-cells = <1>;
#address-cells = <1>;
reg = <0>;
nand-ecc-step-size = <512>;
nand-ecc-strength = <15>;
nand-on-flash-bbt;
brcm,nand-oob-sector-size = <64>;
partitions {
compatible = "fixed-partitions";
#address-cells = <1>;
#size-cells = <1>;
partition@0 {
label = "cferom";
reg = <0x0000000 0x0020000>;
read-only;
};
partition@20000 {
compatible = "brcm,wfi";
label = "wfi";
reg = <0x0020000 0x7d80000>;
};
partition@7da0000 {
label = "nvram";
reg = <0x7da0000 0x160000>;
};
};
};
};
&pinctrl {
pinctrl_leds: leds {
function = "led";
pins = "gpio3", "gpio5";
};
};
&uart0 {
status = "okay";
};