openwrt/target/linux/bcm63xx/dts/bcm6318-comtrend-ar-5315u.dts
Christian Marangi 4a8928526e
bcm63xx: convert to new LED color/function format where possible
Initial conversion to new LED color/function format
and drop label format where possible. The same label
is composed at runtime.

Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
2024-02-07 14:48:35 +01:00

179 lines
2.8 KiB
Plaintext

#include "bcm6318.dtsi"
#include <dt-bindings/input/input.h>
#include <dt-bindings/leds/common.h>
/ {
model = "Comtrend AR-5315u";
compatible = "comtrend,ar-5315u", "brcm,bcm6318";
aliases {
led-boot = &led_power_green;
led-failsafe = &led_power_green;
led-running = &led_power_green;
led-upgrade = &led_power_green;
};
chosen {
bootargs = "rootfstype=squashfs,jffs2 noinitrd console=ttyS0,115200";
stdout-path = "serial0:115200n8";
};
keys {
compatible = "gpio-keys-polled";
#address-cells = <1>;
#size-cells = <0>;
poll-interval = <20>;
wps {
label = "wps";
gpios = <&pinctrl 3 1>;
linux,code = <KEY_WPS_BUTTON>;
debounce-interval = <60>;
};
reset {
label = "reset";
gpios = <&pinctrl 33 1>;
linux,code = <KEY_RESTART>;
debounce-interval = <60>;
};
};
};
&hsspi {
status = "okay";
flash@0 {
compatible = "jedec,spi-nor";
spi-max-frequency = <62500000>;
spi-tx-bus-width = <2>;
spi-rx-bus-width = <2>;
reg = <0>;
#address-cells = <1>;
#size-cells = <1>;
partitions {
compatible = "fixed-partitions";
#address-cells = <1>;
#size-cells = <1>;
cfe@0 {
reg = <0x000000 0x010000>;
label = "cfe";
read-only;
};
linux@10000 {
reg = <0x010000 0xfe0000>;
label = "linux";
compatible = "brcm,bcm963xx-imagetag";
};
nvram@ff0000 {
reg = <0xff0000 0x010000>;
label = "nvram";
};
};
};
};
&leds {
status = "okay";
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_leds
&pinctrl_ephy0_act_led &pinctrl_ephy1_act_led
&pinctrl_ephy2_act_led &pinctrl_ephy3_act_led>;
led@0 {
reg = <0>;
active-low;
function = LED_FUNCTION_WPS;
color = <LED_COLOR_ID_GREEN>;
};
led_power_green: led@1 {
reg = <1>;
active-low;
function = LED_FUNCTION_POWER;
color = <LED_COLOR_ID_GREEN>;
default-state = "on";
};
led@2 {
reg = <2>;
active-low;
function = LED_FUNCTION_USB;
color = <LED_COLOR_ID_GREEN>;
};
led@4 {
reg = <4>;
brcm,hardware-controlled;
brcm,link-signal-sources = <4>;
/* EPHY0 Act */
};
led@5 {
reg = <5>;
brcm,hardware-controlled;
brcm,link-signal-sources = <5>;
/* EPHY1 Act */
};
led@6 {
reg = <6>;
brcm,hardware-controlled;
brcm,link-signal-sources = <6>;
/* EPHY2 Act */
};
led@7 {
reg = <7>;
brcm,hardware-controlled;
brcm,link-signal-sources = <7>;
/* EPHY3 Act */
};
led@8 {
reg = <8>;
active-low;
label = "green:inet";
};
led@9 {
reg = <9>;
active-low;
label = "red:inet";
};
led@10 {
reg = <10>;
active-low;
label = "green:dsl";
};
led@11 {
reg = <11>;
active-low;
function = LED_FUNCTION_POWER;
color = <LED_COLOR_ID_RED>;
};
};
&pinctrl {
pinctrl_leds: leds {
function = "led";
pins = "gpio0", "gpio1",
"gpio2", "gpio8",
"gpio9", "gpio10",
"gpio11";
};
};
&uart0 {
status = "okay";
};