openwrt/target/linux/ipq807x/image/generic.mk
Petr Štetiar b0f3fd550b
ipq807x: prpl-haze: fix sysupgrade flashing from bootloader
While flashing sysupgrade image from U-Boot, then the rootfs_data
overlay filesystem formatting is left for the fstools during firstboot,
but that wont work as mkfs.f2fs is missing in the sysupgrade image:

 mount_root: overlay filesystem in /dev/loop0 has not been formatted yet
 mount_root: no usable overlay filesystem found, using tmpfs overlay
 sh: mkfs.f2fs: not found

 Filesystem                Size      Used Available Use% Mounted on
 /dev/loop0              139.6M     46.9M     92.6M  34% /overlay

 Number  Start (sector)    End (sector)  Size       Code  Name
  20           98850          406349   150.1 MiB   FFFF  rootfs

So lets fix it by adding f2fs support to the sysupgrade image.

Signed-off-by: Petr Štetiar <ynezz@true.cz>
(cherry picked from commit ba415af570)
2024-01-29 09:38:17 +00:00

179 lines
4.7 KiB
Makefile

define Device/FitImage
KERNEL_SUFFIX := -uImage.itb
KERNEL = kernel-bin | libdeflate-gzip | fit gzip $$(KDIR)/image-$$(DEVICE_DTS).dtb
KERNEL_NAME := Image
endef
define Device/FitImageLzma
KERNEL_SUFFIX := -uImage.itb
KERNEL = kernel-bin | lzma | fit lzma $$(KDIR)/image-$$(DEVICE_DTS).dtb
KERNEL_NAME := Image
endef
define Device/EmmcImage
IMAGES += factory.bin sysupgrade.bin
IMAGE/factory.bin := append-rootfs | pad-rootfs | pad-to 64k
IMAGE/sysupgrade.bin/squashfs := append-rootfs | pad-to 64k | sysupgrade-tar rootfs=$$$$@ | append-metadata
endef
define Device/UbiFit
KERNEL_IN_UBI := 1
IMAGES := factory.ubi sysupgrade.bin
IMAGE/factory.ubi := append-ubi
IMAGE/sysupgrade.bin := sysupgrade-tar | append-metadata
endef
define Device/buffalo_wxr-5950ax12
$(call Device/FitImage)
DEVICE_VENDOR := Buffalo
DEVICE_MODEL := WXR-5950AX12
BLOCKSIZE := 128k
PAGESIZE := 2048
DEVICE_DTS_CONFIG := config@hk01
SOC := ipq8074
IMAGES := sysupgrade.bin
IMAGE/sysupgrade.bin := sysupgrade-tar | append-metadata
DEVICE_PACKAGES := ipq-wifi-buffalo_wxr-5950ax12
endef
TARGET_DEVICES += buffalo_wxr-5950ax12
define Device/dynalink_dl-wrx36
$(call Device/FitImage)
$(call Device/UbiFit)
DEVICE_VENDOR := Dynalink
DEVICE_MODEL := DL-WRX36
BLOCKSIZE := 128k
PAGESIZE := 2048
DEVICE_DTS_CONFIG := config@rt5010w-d350-rev0
SOC := ipq8072
DEVICE_PACKAGES := ipq-wifi-dynalink_dl-wrx36
endef
TARGET_DEVICES += dynalink_dl-wrx36
define Device/edgecore_eap102
$(call Device/FitImage)
$(call Device/UbiFit)
DEVICE_VENDOR := Edgecore
DEVICE_MODEL := EAP102
BLOCKSIZE := 128k
PAGESIZE := 2048
DEVICE_DTS_CONFIG := config@ac02
SOC := ipq8071
DEVICE_PACKAGES := ipq-wifi-edgecore_eap102
IMAGE/factory.ubi := append-ubi | qsdk-ipq-factory-nand
endef
TARGET_DEVICES += edgecore_eap102
define Device/edimax_cax1800
$(call Device/FitImage)
$(call Device/UbiFit)
DEVICE_VENDOR := Edimax
DEVICE_MODEL := CAX1800
BLOCKSIZE := 128k
PAGESIZE := 2048
DEVICE_DTS_CONFIG := config@ac03
SOC := ipq8070
DEVICE_PACKAGES := ipq-wifi-edimax_cax1800
endef
TARGET_DEVICES += edimax_cax1800
define Device/netgear_wax218
$(call Device/FitImage)
$(call Device/UbiFit)
DEVICE_VENDOR := Netgear
DEVICE_MODEL := WAX218
DEVICE_DTS_CONFIG := config@hk07
BLOCKSIZE := 128k
PAGESIZE := 2048
SOC := ipq8072
ifneq ($(CONFIG_TARGET_ROOTFS_INITRAMFS),)
ARTIFACTS := web-ui-factory.fit
ARTIFACT/web-ui-factory.fit := append-image initramfs-uImage.itb | \
ubinize-kernel | qsdk-ipq-factory-nand
endif
DEVICE_PACKAGES := kmod-spi-gpio kmod-spi-bitbang kmod-gpio-nxp-74hc164 \
ipq-wifi-netgear_wax218
endef
TARGET_DEVICES += netgear_wax218
define Device/prpl_haze
$(call Device/FitImage)
$(call Device/EmmcImage)
DEVICE_VENDOR := prpl Foundation
DEVICE_MODEL := Haze
DEVICE_DTS_CONFIG := config@hk09
SOC := ipq8072
DEVICE_PACKAGES += ath11k-firmware-qcn9074 ipq-wifi-prpl_haze kmod-ath11k-pci \
mkf2fs f2fsck kmod-fs-f2fs
endef
TARGET_DEVICES += prpl_haze
define Device/qnap_301w
$(call Device/FitImage)
$(call Device/EmmcImage)
DEVICE_VENDOR := QNAP
DEVICE_MODEL := 301w
DEVICE_DTS_CONFIG := config@hk01
KERNEL_SIZE := 16384k
SOC := ipq8072
DEVICE_PACKAGES += ipq-wifi-qnap_301w
endef
TARGET_DEVICES += qnap_301w
define Device/redmi_ax6
$(call Device/xiaomi_ax3600)
DEVICE_VENDOR := Redmi
DEVICE_MODEL := AX6
DEVICE_PACKAGES := ipq-wifi-redmi_ax6
endef
TARGET_DEVICES += redmi_ax6
define Device/xiaomi_ax3600
$(call Device/FitImage)
$(call Device/UbiFit)
DEVICE_VENDOR := Xiaomi
DEVICE_MODEL := AX3600
BLOCKSIZE := 128k
PAGESIZE := 2048
DEVICE_DTS_CONFIG := config@ac04
SOC := ipq8071
KERNEL_SIZE := 36608k
DEVICE_PACKAGES := ipq-wifi-xiaomi_ax3600 kmod-ath10k-ct-smallbuffers ath10k-firmware-qca9887-ct
ifneq ($(CONFIG_TARGET_ROOTFS_INITRAMFS),)
ARTIFACTS := initramfs-factory.ubi
ARTIFACT/initramfs-factory.ubi := append-image-stage initramfs-uImage.itb | ubinize-kernel
endif
endef
TARGET_DEVICES += xiaomi_ax3600
define Device/xiaomi_ax9000
$(call Device/FitImage)
$(call Device/UbiFit)
DEVICE_VENDOR := Xiaomi
DEVICE_MODEL := AX9000
BLOCKSIZE := 128k
PAGESIZE := 2048
DEVICE_DTS_CONFIG := config@hk14
SOC := ipq8072
KERNEL_SIZE := 57344k
DEVICE_PACKAGES := ipq-wifi-xiaomi_ax9000 kmod-ath11k-pci ath11k-firmware-qcn9074 \
kmod-ath10k-ct ath10k-firmware-qca9887-ct
ifneq ($(CONFIG_TARGET_ROOTFS_INITRAMFS),)
ARTIFACTS := initramfs-factory.ubi
ARTIFACT/initramfs-factory.ubi := append-image-stage initramfs-uImage.itb | ubinize-kernel
endif
endef
TARGET_DEVICES += xiaomi_ax9000
define Device/zyxel_nbg7815
$(call Device/FitImage)
$(call Device/EmmcImage)
DEVICE_VENDOR := ZYXEL
DEVICE_MODEL := NBG7815
DEVICE_DTS_CONFIG := config@nbg7815
SOC := ipq8074
DEVICE_PACKAGES += ipq-wifi-zyxel_nbg7815 kmod-ath11k-pci kmod-hwmon-tmp103 \
kmod-bluetooth
endef
TARGET_DEVICES += zyxel_nbg7815