mirror of
https://github.com/openwrt/openwrt.git
synced 2024-12-27 17:18:59 +00:00
1724d4e9ed
Hardware
--------
CPU: Qualcomm Atheros QCA9558
RAM: 128M DDR2
FLASH: 16MiB
ETH: 1x Atheros AR8035 (PoE in)
1x Atheros AR8033
WiFi2: QCA9558 2T2R
WiFi5: QCA9880 2T2R
BTN: 1x Reset
LED: 1x LED blue
1x LED red
BEEP: 1x GPIO attached piezo beeper
UART: 3.3V GND TX RX (115200-N-8) (3.3V is square pad)
Header is located next to reset-button
Installation
------------
Make sure you set a password for the root user as prompted on first
setup!
1. Upload OpenWRT sysupgrade image via SSH to the device.
Use /tmp as the destination folder on the device.
User is root, password the one set in the web interface.
2. Install OpenWRT with
> sysupgrade -n -F /tmp/<openwrt-image-name>
Signed-off-by: David Bauer <mail@david-bauer.net>
29 lines
637 B
Plaintext
29 lines
637 B
Plaintext
CONFIG_AT803X_PHY=y
|
|
CONFIG_BLK_MQ_PCI=y
|
|
CONFIG_GPIO_WATCHDOG=y
|
|
CONFIG_GPIO_WATCHDOG_ARCH_INITCALL=y
|
|
CONFIG_INTEL_XWAY_PHY=y
|
|
CONFIG_IP17XX_PHY=y
|
|
CONFIG_LEDS_RESET=y
|
|
CONFIG_MARVELL_PHY=y
|
|
CONFIG_MICREL_PHY=y
|
|
CONFIG_MTD_REDBOOT_PARTS=y
|
|
CONFIG_MTD_SPLIT_EVA_FW=y
|
|
CONFIG_OF_ADDRESS_PCI=y
|
|
CONFIG_OF_PCI=y
|
|
CONFIG_OF_PCI_IRQ=y
|
|
CONFIG_PCI=y
|
|
CONFIG_PCI_AR71XX=y
|
|
CONFIG_PCI_AR724X=y
|
|
CONFIG_PCI_DISABLE_COMMON_QUIRKS=y
|
|
CONFIG_PCI_DOMAINS=y
|
|
CONFIG_PHY_AR7100_USB=y
|
|
CONFIG_PHY_AR7200_USB=y
|
|
CONFIG_REGULATOR=y
|
|
CONFIG_REGULATOR_FIXED_VOLTAGE=y
|
|
CONFIG_RTL8366RB_PHY=y
|
|
CONFIG_RTL8366S_PHY=y
|
|
CONFIG_RTL8366_SMI=y
|
|
CONFIG_RTL8367_PHY=y
|
|
CONFIG_WATCHDOG_CORE=y
|