mirror of
https://github.com/openwrt/openwrt.git
synced 2024-12-19 05:38:00 +00:00
0b078f2ecf
There is no need to keep a version specific dts directory. Rename the folder to its standard location. Signed-off-by: Markus Stockhausen <markus.stockhausen@gmx.de>
425 lines
8.5 KiB
Plaintext
425 lines
8.5 KiB
Plaintext
// SPDX-License-Identifier: GPL-2.0-or-later
|
|
/dts-v1/;
|
|
|
|
#include "rtl930x.dtsi"
|
|
|
|
#include <dt-bindings/input/input.h>
|
|
#include <dt-bindings/gpio/gpio.h>
|
|
#include <dt-bindings/leds/common.h>
|
|
#include <dt-bindings/thermal/thermal.h>
|
|
|
|
/ {
|
|
compatible = "zyxel,xgs1250-12", "realtek,rtl838x-soc";
|
|
model = "Zyxel XGS1250-12 Switch";
|
|
|
|
aliases {
|
|
led-boot = &led_pwr_sys;
|
|
led-failsafe = &led_pwr_sys;
|
|
led-running = &led_pwr_sys;
|
|
led-upgrade = &led_pwr_sys;
|
|
};
|
|
|
|
keys {
|
|
compatible = "gpio-keys";
|
|
|
|
mode {
|
|
label = "reset";
|
|
gpios = <&gpio0 22 GPIO_ACTIVE_LOW>;
|
|
linux,code = <KEY_RESTART>;
|
|
};
|
|
};
|
|
|
|
/* i2c of the SFP cage: port 12 */
|
|
i2c0: i2c-rtl9300@1b00036c {
|
|
compatible = "realtek,rtl9300-i2c";
|
|
reg = <0x1b00036c 0x3c>;
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
sda-pin = <10>;
|
|
scl-pin = <8>;
|
|
clock-frequency = <100000>;
|
|
};
|
|
|
|
leds {
|
|
compatible = "gpio-leds";
|
|
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&pinmux_disable_sys_led>;
|
|
|
|
led_pwr_sys: led-0 {
|
|
color = <LED_COLOR_ID_GREEN>;
|
|
function = LED_FUNCTION_POWER;
|
|
gpios = <&gpio0 0 GPIO_ACTIVE_HIGH>;
|
|
};
|
|
};
|
|
|
|
sfp0: sfp-p12 {
|
|
compatible = "sff,sfp";
|
|
i2c-bus = <&i2c0>;
|
|
los-gpio = <&gpio0 17 GPIO_ACTIVE_HIGH>;
|
|
tx-fault-gpio = <&gpio0 20 GPIO_ACTIVE_HIGH>;
|
|
mod-def0-gpio = <&gpio0 16 GPIO_ACTIVE_LOW>;
|
|
tx-disable-gpio = <&gpio0 15 GPIO_ACTIVE_HIGH>;
|
|
};
|
|
|
|
led_set: led_set {
|
|
compatible = "realtek,rtl9300-leds";
|
|
active-low;
|
|
|
|
led_set0 = <0x0a20 0x0b80>; // LED set 0: 1000Mbps, 10/100Mbps
|
|
led_set1 = <0x0a0b 0x0a28 0x0a82 0x0a0b>; // LED set 1: (10G, 5G, 2.5G) (2.5G, 1G)
|
|
// (5G, 10/100) (10G, 5G, 2.5G)
|
|
led_set2 = <0x0a20 0x0a01>; // LED set 2: 1000MBit, 10GBit
|
|
};
|
|
|
|
thermal-zones {
|
|
phy24-thermal {
|
|
/* Poll every 10 seconds */
|
|
polling-delay-passive = <10000>;
|
|
polling-delay = <10000>;
|
|
thermal-sensors = <&phy24>;
|
|
|
|
trips {
|
|
phy24_trip0: phy24-trip0 {
|
|
/* At 80 degrees turn on fan */
|
|
temperature = <80000>;
|
|
hysteresis = <1000>;
|
|
type = "active";
|
|
};
|
|
|
|
phy24_trip1: phy24-trip1 {
|
|
/* At 108 degrees phys exceed spec */
|
|
temperature = <108000>;
|
|
hysteresis = <5000>;
|
|
type = "critical";
|
|
};
|
|
};
|
|
|
|
cooling-maps {
|
|
map {
|
|
trip = <&phy24_trip0>;
|
|
cooling-device = <&chassis_fan THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
|
|
};
|
|
};
|
|
};
|
|
|
|
phy25-thermal {
|
|
/* Poll every 10 seconds */
|
|
polling-delay-passive = <10000>;
|
|
polling-delay = <10000>;
|
|
thermal-sensors = <&phy25>;
|
|
|
|
trips {
|
|
phy25_trip0: phy25-trip0 {
|
|
/* At 80 degrees turn on fan */
|
|
temperature = <80000>;
|
|
hysteresis = <1000>;
|
|
type = "active";
|
|
};
|
|
|
|
phy25_trip1: phy25-trip1 {
|
|
/* At 108 degrees phys exceed spec */
|
|
temperature = <108000>;
|
|
hysteresis = <5000>;
|
|
type = "critical";
|
|
};
|
|
};
|
|
|
|
cooling-maps {
|
|
map {
|
|
trip = <&phy25_trip0>;
|
|
cooling-device = <&chassis_fan THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
|
|
};
|
|
};
|
|
};
|
|
|
|
phy26-thermal {
|
|
/* Poll every 10 seconds */
|
|
polling-delay-passive = <10000>;
|
|
polling-delay = <10000>;
|
|
thermal-sensors = <&phy26>;
|
|
|
|
trips {
|
|
phy26_trip0: phy26-trip0 {
|
|
/* At 80 degrees turn on fan */
|
|
temperature = <80000>;
|
|
hysteresis = <1000>;
|
|
type = "active";
|
|
};
|
|
|
|
phy26_trip1: phy26-trip1 {
|
|
/* At 108 degrees phys exceed spec */
|
|
temperature = <108000>;
|
|
hysteresis = <5000>;
|
|
type = "critical";
|
|
};
|
|
};
|
|
|
|
cooling-maps {
|
|
map {
|
|
trip = <&phy26_trip0>;
|
|
cooling-device = <&chassis_fan THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
|
|
};
|
|
};
|
|
};
|
|
};
|
|
|
|
/* YEN SUN TECHNOLOGY FD122510LL-N fan */
|
|
chassis_fan: gpio-fan {
|
|
compatible = "gpio-fan";
|
|
gpios = <&gpio0 11 GPIO_ACTIVE_HIGH>;
|
|
gpio-fan,speed-map = <0 0
|
|
7000 1>;
|
|
#cooling-cells = <2>;
|
|
};
|
|
};
|
|
|
|
&spi0 {
|
|
status = "okay";
|
|
flash@0 {
|
|
compatible = "jedec,spi-nor";
|
|
reg = <0>;
|
|
spi-max-frequency = <10000000>;
|
|
|
|
partitions {
|
|
compatible = "fixed-partitions";
|
|
#address-cells = <1>;
|
|
#size-cells = <1>;
|
|
|
|
partition@0 {
|
|
label = "u-boot";
|
|
reg = <0x0 0xe0000>;
|
|
read-only;
|
|
};
|
|
partition@e0000 {
|
|
label = "u-boot-env";
|
|
reg = <0xe0000 0x10000>;
|
|
};
|
|
partition@f0000 {
|
|
label = "u-boot-env2";
|
|
reg = <0xf0000 0x10000>;
|
|
read-only;
|
|
};
|
|
partition@100000 {
|
|
label = "jffs";
|
|
reg = <0x100000 0x100000>;
|
|
};
|
|
partition@200000 {
|
|
label = "jffs2";
|
|
reg = <0x200000 0x100000>;
|
|
};
|
|
partition@b300000 {
|
|
label = "firmware";
|
|
reg = <0x300000 0xce0000>;
|
|
compatible = "openwrt,uimage", "denx,uimage";
|
|
openwrt,ih-magic = <0x93001250>;
|
|
};
|
|
partition@fe0000 {
|
|
label = "log";
|
|
reg = <0xfe0000 0x20000>;
|
|
};
|
|
};
|
|
};
|
|
};
|
|
|
|
ðernet0 {
|
|
mdio: mdio-bus {
|
|
compatible = "realtek,rtl838x-mdio";
|
|
regmap = <ðernet0>;
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
|
|
/* External RTL8218D PHY */
|
|
phy0: ethernet-phy@0 {
|
|
reg = <0>;
|
|
compatible = "ethernet-phy-ieee802.3-c22";
|
|
rtl9300,smi-address = <0 0>;
|
|
sds = < 2 >;
|
|
// Disabled because we do not know how to bring up again
|
|
// reset-gpios = <&gpio0 21 GPIO_ACTIVE_LOW>;
|
|
};
|
|
phy1: ethernet-phy@1 {
|
|
reg = <1>;
|
|
compatible = "ethernet-phy-ieee802.3-c22";
|
|
rtl9300,smi-address = <0 1>;
|
|
};
|
|
phy2: ethernet-phy@2 {
|
|
reg = <2>;
|
|
compatible = "ethernet-phy-ieee802.3-c22";
|
|
rtl9300,smi-address = <0 2>;
|
|
};
|
|
phy3: ethernet-phy@3 {
|
|
reg = <3>;
|
|
compatible = "ethernet-phy-ieee802.3-c22";
|
|
rtl9300,smi-address = <0 3>;
|
|
};
|
|
phy4: ethernet-phy@4 {
|
|
reg = <4>;
|
|
compatible = "ethernet-phy-ieee802.3-c22";
|
|
rtl9300,smi-address = <0 4>;
|
|
};
|
|
phy5: ethernet-phy@5 {
|
|
reg = <5>;
|
|
compatible = "ethernet-phy-ieee802.3-c22";
|
|
rtl9300,smi-address = <0 5>;
|
|
};
|
|
phy6: ethernet-phy@6 {
|
|
reg = <6>;
|
|
compatible = "ethernet-phy-ieee802.3-c22";
|
|
rtl9300,smi-address = <0 6>;
|
|
};
|
|
phy7: ethernet-phy@7 {
|
|
reg = <7>;
|
|
compatible = "ethernet-phy-ieee802.3-c22";
|
|
rtl9300,smi-address = <0 7>;
|
|
};
|
|
|
|
/* External Aquantia 113C PHYs */
|
|
phy24: ethernet-phy@24 {
|
|
reg = <24>;
|
|
compatible = "ethernet-phy-ieee802.3-c45";
|
|
rtl9300,smi-address = <1 8>;
|
|
sds = < 6 >;
|
|
// Disabled because we do not know how to bring up again
|
|
// reset-gpios = <&gpio0 21 GPIO_ACTIVE_LOW>;
|
|
#thermal-sensor-cells = <0>;
|
|
};
|
|
|
|
phy25: ethernet-phy@25 {
|
|
reg = <25>;
|
|
compatible = "ethernet-phy-ieee802.3-c45";
|
|
rtl9300,smi-address = <2 8>;
|
|
sds = < 7 >;
|
|
// Disabled because we do not know how to bring up again
|
|
// reset-gpios = <&gpio0 21 GPIO_ACTIVE_LOW>;
|
|
#thermal-sensor-cells = <0>;
|
|
};
|
|
|
|
phy26: ethernet-phy@26 {
|
|
reg = <26>;
|
|
compatible = "ethernet-phy-ieee802.3-c45";
|
|
rtl9300,smi-address = <3 8>;
|
|
sds = < 8 >;
|
|
// Disabled because we do not know how to bring up again
|
|
// reset-gpios = <&gpio0 21 GPIO_ACTIVE_LOW>;
|
|
#thermal-sensor-cells = <0>;
|
|
};
|
|
|
|
/* SFP Ports */
|
|
phy27: ethernet-phy@27 {
|
|
compatible = "ethernet-phy-ieee802.3-c22";
|
|
phy-is-integrated;
|
|
reg = <27>;
|
|
rtl9300,smi-address = <4 0>;
|
|
sds = < 9 >;
|
|
};
|
|
|
|
};
|
|
};
|
|
|
|
&switch0 {
|
|
ports {
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
|
|
port@0 {
|
|
reg = <0>;
|
|
label = "lan1";
|
|
phy-handle = <&phy0>;
|
|
phy-mode = "xgmii";
|
|
led-set = <0>;
|
|
};
|
|
port@1 {
|
|
reg = <1>;
|
|
label = "lan2";
|
|
phy-handle = <&phy1>;
|
|
phy-mode = "xgmii";
|
|
led-set = <0>;
|
|
};
|
|
port@2 {
|
|
reg = <2>;
|
|
label = "lan3";
|
|
phy-handle = <&phy2>;
|
|
phy-mode = "xgmii";
|
|
led-set = <0>;
|
|
};
|
|
port@3 {
|
|
reg = <3>;
|
|
label = "lan4";
|
|
phy-handle = <&phy3>;
|
|
phy-mode = "xgmii";
|
|
led-set = <0>;
|
|
};
|
|
port@4 {
|
|
reg = <4>;
|
|
label = "lan5";
|
|
phy-handle = <&phy4>;
|
|
phy-mode = "xgmii";
|
|
led-set = <0>;
|
|
};
|
|
port@5 {
|
|
reg = <5>;
|
|
label = "lan6";
|
|
phy-handle = <&phy5>;
|
|
phy-mode = "xgmii";
|
|
led-set = <0>;
|
|
};
|
|
port@6 {
|
|
reg = <6>;
|
|
label = "lan7";
|
|
phy-handle = <&phy6>;
|
|
phy-mode = "xgmii";
|
|
led-set = <0>;
|
|
};
|
|
port@7 {
|
|
reg = <7>;
|
|
label = "lan8";
|
|
phy-handle = <&phy7>;
|
|
phy-mode = "xgmii";
|
|
led-set = <0>;
|
|
};
|
|
|
|
port@24 {
|
|
reg = <24>;
|
|
label = "lan9";
|
|
phy-mode = "usxgmii";
|
|
phy-handle = <&phy24>;
|
|
led-set = <1>;
|
|
};
|
|
port@25 {
|
|
reg = <25>;
|
|
label = "lan10";
|
|
phy-mode = "usxgmii";
|
|
phy-handle = <&phy25>;
|
|
led-set = <1>;
|
|
};
|
|
port@26 {
|
|
reg = <26>;
|
|
label = "lan11";
|
|
phy-mode = "usxgmii";
|
|
phy-handle = <&phy26>;
|
|
led-set = <1>;
|
|
};
|
|
|
|
port@27 {
|
|
reg = <27>;
|
|
label = "lan12";
|
|
phy-mode = "1000base-x";
|
|
phy-handle = <&phy27>;
|
|
sfp = <&sfp0>;
|
|
led-set = <2>;
|
|
managed = "in-band-status";
|
|
};
|
|
|
|
port@28 {
|
|
ethernet = <ðernet0>;
|
|
reg = <28>;
|
|
phy-mode = "internal";
|
|
fixed-link {
|
|
speed = <10000>;
|
|
full-duplex;
|
|
};
|
|
};
|
|
};
|
|
};
|