ExternalVendorCode/openwrt
1
0
Fork 0
mirror of https://github.com/openwrt/openwrt.git synced 2024-12-29 10:08:59 +00:00
Code Issues Actions 6 Packages Projects Releases Wiki Activity
8f5d714a7f
openwrt/target/linux/bcm63xx/patches-4.19/341-MIPS-BCM63XX-add-support-for-BCM6318.patch
Adrian Schmutzler e7bfda2c24 brcm63xx: rename target to bcm63xx 
This change makes the names of Broadcom targets consistent by using
the common notation based on SoC/CPU ID (which is used internally
anyway), bcmXXXX instead of brcmXXXX.
This is even used for target TITLE in make menuconfig already,
only the short target name used brcm so far.

Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
2020-02-14 14:10:51 +01:00

698 lines
23 KiB
Diff
Raw Blame History

From 60c29522a8c77d96145d965589c56befda7d4c3d Mon Sep 17 00:00:00 2001
From: Jonas Gorski <jogo@openwrt.org>
Date: Sun, 8 Dec 2013 01:24:09 +0100
Subject: [PATCH 51/53] MIPS: BCM63XX: add support for BCM6318
---
arch/mips/bcm63xx/Kconfig | 5 +
arch/mips/bcm63xx/boards/board_bcm963xx.c | 2 +-
arch/mips/bcm63xx/clk.c | 8 +-
arch/mips/bcm63xx/cpu.c | 53 +++++++++++
arch/mips/bcm63xx/dev-flash.c | 3 +
arch/mips/bcm63xx/dev-spi.c | 2 +-
arch/mips/bcm63xx/irq.c | 10 ++
arch/mips/bcm63xx/prom.c | 2 +-
arch/mips/bcm63xx/reset.c | 24 +++++
arch/mips/bcm63xx/setup.c | 5 +-
arch/mips/include/asm/mach-bcm63xx/bcm63xx_cpu.h | 107 ++++++++++++++++++++++
arch/mips/include/asm/mach-bcm63xx/bcm63xx_regs.h | 75 ++++++++++++++-
arch/mips/include/asm/mach-bcm63xx/ioremap.h | 1 +
13 files changed, 291 insertions(+), 6 deletions(-)
--- a/arch/mips/bcm63xx/Kconfig
+++ b/arch/mips/bcm63xx/Kconfig
@@ -19,6 +19,11 @@ config BCM63XX_EHCI
select USB_EHCI_BIG_ENDIAN_DESC if USB_EHCI_HCD
select USB_EHCI_BIG_ENDIAN_MMIO if USB_EHCI_HCD
+config BCM63XX_CPU_6318
+ bool "support 6318 CPU"
+ select SYS_HAS_CPU_BMIPS32_3300
+ select HW_HAS_PCI
+
config BCM63XX_CPU_6328
bool "support 6328 CPU"
select SYS_HAS_CPU_BMIPS4350
--- a/arch/mips/bcm63xx/boards/board_bcm963xx.c
+++ b/arch/mips/bcm63xx/boards/board_bcm963xx.c
@@ -697,7 +697,7 @@ void __init board_prom_init(void)
/* read base address of boot chip select (0)
* 6328/6362 do not have MPI but boot from a fixed address
*/
- if (BCMCPU_IS_6328() || BCMCPU_IS_6362() || BCMCPU_IS_63268()) {
+ if (BCMCPU_IS_6318() || BCMCPU_IS_6328() || BCMCPU_IS_6362() || BCMCPU_IS_63268()) {
val = 0x18000000;
} else {
val = bcm_mpi_readl(MPI_CSBASE_REG(0));
--- a/arch/mips/bcm63xx/clk.c
+++ b/arch/mips/bcm63xx/clk.c
@@ -289,7 +289,9 @@ static void hsspi_set(struct clk *clk, i
{
u32 mask;
- if (BCMCPU_IS_6328())
+ if (BCMCPU_IS_6318())
+ mask = CKCTL_6318_HSSPI_EN;
+ else if (BCMCPU_IS_6328())
mask = CKCTL_6328_HSSPI_EN;
else if (BCMCPU_IS_6362())
mask = CKCTL_6362_HSSPI_EN;
@@ -444,6 +446,19 @@ static struct clk_lookup bcm3368_clks[]
CLKDEV_INIT("bcm63xx_enet.1", "enet", &clk_enet1),
};
+static struct clk_lookup bcm6318_clks[] = {
+ /* fixed rate clocks */
+ CLKDEV_INIT(NULL, "periph", &clk_periph),
+ CLKDEV_INIT("bcm63xx_uart.0", "refclk", &clk_periph),
+ CLKDEV_INIT("bcm63xx-hsspi.0", "pll", &clk_hsspi_pll),
+ /* gated clocks */
+ CLKDEV_INIT(NULL, "enetsw", &clk_enetsw),
+ CLKDEV_INIT(NULL, "usbh", &clk_usbh),
+ CLKDEV_INIT(NULL, "usbd", &clk_usbh),
+ CLKDEV_INIT(NULL, "hsspi", &clk_hsspi),
+ CLKDEV_INIT(NULL, "pcie", &clk_pcie),
+};
+
static struct clk_lookup bcm6328_clks[] = {
/* fixed rate clocks */
CLKDEV_INIT(NULL, "periph", &clk_periph),
@@ -565,6 +580,7 @@ static struct clk_lookup bcm63268_clks[]
CLKDEV_INIT(NULL, "pcie", &clk_pcie),
};
+#define HSSPI_PLL_HZ_6318 250000000
#define HSSPI_PLL_HZ_6328 133333333
#define HSSPI_PLL_HZ_6362 400000000
@@ -574,6 +590,10 @@ static int __init bcm63xx_clk_init(void)
case BCM3368_CPU_ID:
clkdev_add_table(bcm3368_clks, ARRAY_SIZE(bcm3368_clks));
break;
+ case BCM6318_CPU_ID:
+ clk_hsspi_pll.rate = HSSPI_PLL_HZ_6318;
+ clkdev_add_table(bcm6318_clks, ARRAY_SIZE(bcm6318_clks));
+ break;
case BCM6328_CPU_ID:
clk_hsspi_pll.rate = HSSPI_PLL_HZ_6328;
clkdev_add_table(bcm6328_clks, ARRAY_SIZE(bcm6328_clks));
--- a/arch/mips/bcm63xx/cpu.c
+++ b/arch/mips/bcm63xx/cpu.c
@@ -41,6 +41,14 @@ static const int bcm3368_irqs[] = {
__GEN_CPU_IRQ_TABLE(3368)
};
+static const unsigned long bcm6318_regs_base[] = {
+ __GEN_CPU_REGS_TABLE(6318)
+};
+
+static const int bcm6318_irqs[] = {
+ __GEN_CPU_IRQ_TABLE(6318)
+};
+
static const unsigned long bcm6328_regs_base[] = {
__GEN_CPU_REGS_TABLE(6328)
};
@@ -134,6 +142,10 @@ unsigned int bcm63xx_get_memory_size(voi
return bcm63xx_memory_size;
}
+#define STRAP_OVERRIDE_BUS_REG 0x0
+#define OVERRIDE_BUS_MIPS_FREQ_SHIFT 23
+#define OVERRIDE_BUS_MIPS_FREQ_MASK (0x3 << OVERRIDE_BUS_MIPS_FREQ_SHIFT)
+
static unsigned int detect_cpu_clock(void)
{
u32 cpu_id = bcm63xx_get_cpu_id();
@@ -142,6 +154,28 @@ static unsigned int detect_cpu_clock(voi
case BCM3368_CPU_ID:
return 300000000;
+ case BCM6318_CPU_ID:
+ {
+ unsigned int tmp, mips_pll_fcvo;
+
+ tmp = bcm_readl(BCM_6318_STRAP_BASE + STRAP_OVERRIDE_BUS_REG);
+
+ pr_info("strap_override_bus = %08x\n", tmp);
+
+ mips_pll_fcvo = (tmp & OVERRIDE_BUS_MIPS_FREQ_MASK)
+ >> OVERRIDE_BUS_MIPS_FREQ_SHIFT;
+
+ switch (mips_pll_fcvo) {
+ case 0:
+ return 166000000;
+ case 1:
+ return 400000000;
+ case 2:
+ return 250000000;
+ case 3:
+ return 333000000;
+ };
+ }
case BCM6328_CPU_ID:
{
unsigned int tmp, mips_pll_fcvo;
@@ -297,6 +331,13 @@ static unsigned int detect_memory_size(v
unsigned int cols = 0, rows = 0, is_32bits = 0, banks = 0;
u32 val;
+ if (BCMCPU_IS_6318()) {
+ val = bcm_sdram_readl(SDRAM_CFG_REG);
+ val = val & SDRAM_CFG_6318_SPACE_MASK;
+ val >>= SDRAM_CFG_6318_SPACE_SHIFT;
+ return 1 << (val + 20);
+ }
+
if (BCMCPU_IS_6328() || BCMCPU_IS_6362() || BCMCPU_IS_63268())
return bcm_ddr_readl(DDR_CSEND_REG) << 24;
@@ -343,6 +384,12 @@ void __init bcm63xx_cpu_init(void)
switch (current_cpu_type()) {
case CPU_BMIPS3300:
+ if ((read_c0_prid() & 0xff) >= 0x33) {
+ /* BCM6318 */
+ chipid_reg = BCM_6368_PERF_BASE;
+ break;
+ }
+
if ((read_c0_prid() & PRID_IMP_MASK) != PRID_IMP_BMIPS3300_ALT)
__cpu_name[cpu] = "Broadcom BCM6338";
/* fall-through */
@@ -390,6 +437,10 @@ void __init bcm63xx_cpu_init(void)
bcm63xx_cpu_variant = bcm63xx_cpu_id;
switch (bcm63xx_cpu_id) {
+ case BCM6318_CPU_ID:
+ bcm63xx_regs_base = bcm6318_regs_base;
+ bcm63xx_irqs = bcm6318_irqs;
+ break;
case BCM3368_CPU_ID:
bcm63xx_regs_base = bcm3368_regs_base;
bcm63xx_irqs = bcm3368_irqs;
--- a/arch/mips/bcm63xx/dev-flash.c
+++ b/arch/mips/bcm63xx/dev-flash.c
@@ -60,6 +60,9 @@ static int __init bcm63xx_detect_flash_t
u32 val;
switch (bcm63xx_get_cpu_id()) {
+ case BCM6318_CPU_ID:
+ /* only support serial flash */
+ return BCM63XX_FLASH_TYPE_SERIAL;
case BCM6328_CPU_ID:
val = bcm_misc_readl(MISC_STRAPBUS_6328_REG);
if (val & STRAPBUS_6328_BOOT_SEL_SERIAL)
--- a/arch/mips/bcm63xx/dev-spi.c
+++ b/arch/mips/bcm63xx/dev-spi.c
@@ -38,7 +38,7 @@ static struct platform_device bcm63xx_sp
int __init bcm63xx_spi_register(void)
{
- if (BCMCPU_IS_6328() || BCMCPU_IS_6345())
+ if (BCMCPU_IS_6318() || BCMCPU_IS_6328() || BCMCPU_IS_6345())
return -ENODEV;
spi_resources[0].start = bcm63xx_regset_address(RSET_SPI);
--- a/arch/mips/bcm63xx/irq.c
+++ b/arch/mips/bcm63xx/irq.c
@@ -48,6 +48,19 @@ void __init arch_init_irq(void)
ext_irqs[3] = BCM_3368_EXT_IRQ3;
ext_shift = 4;
break;
+ case BCM6318_CPU_ID:
+ periph_bases[0] += PERF_IRQMASK_6318_REG;
+ periph_irq_count = 1;
+ periph_width = 4;
+
+ ext_intc_bases[0] += PERF_EXTIRQ_CFG_REG_6318;
+ ext_irq_count = 4;
+ ext_irqs[0] = BCM_6318_EXT_IRQ0;
+ ext_irqs[1] = BCM_6318_EXT_IRQ0;
+ ext_irqs[2] = BCM_6318_EXT_IRQ0;
+ ext_irqs[3] = BCM_6318_EXT_IRQ0;
+ ext_shift = 4;
+ break;
case BCM6328_CPU_ID:
periph_bases[0] += PERF_IRQMASK_6328_REG(0);
periph_bases[1] += PERF_IRQMASK_6328_REG(1);
--- a/arch/mips/bcm63xx/prom.c
+++ b/arch/mips/bcm63xx/prom.c
@@ -68,7 +68,7 @@ void __init prom_init(void)
if (reg & OTP_6328_REG3_TP1_DISABLED)
bmips_smp_enabled = 0;
- } else if (BCMCPU_IS_3368() || BCMCPU_IS_6358()) {
+ } else if (BCMCPU_IS_6318() || BCMCPU_IS_3368() || BCMCPU_IS_6358()) {
bmips_smp_enabled = 0;
}
--- a/arch/mips/bcm63xx/reset.c
+++ b/arch/mips/bcm63xx/reset.c
@@ -44,6 +44,23 @@
#define BCM3368_RESET_PCIE 0
#define BCM3368_RESET_PCIE_EXT 0
+
+#define BCM6318_RESET_SPI SOFTRESET_6318_SPI_MASK
+#define BCM6318_RESET_ENET 0
+#define BCM6318_RESET_USBH SOFTRESET_6318_USBH_MASK
+#define BCM6318_RESET_USBD SOFTRESET_6318_USBS_MASK
+#define BCM6318_RESET_DSL 0
+#define BCM6318_RESET_SAR SOFTRESET_6318_SAR_MASK
+#define BCM6318_RESET_EPHY SOFTRESET_6318_EPHY_MASK
+#define BCM6318_RESET_ENETSW SOFTRESET_6318_ENETSW_MASK
+#define BCM6318_RESET_PCM 0
+#define BCM6318_RESET_MPI 0
+#define BCM6318_RESET_PCIE \
+ (SOFTRESET_6318_PCIE_MASK | \
+ SOFTRESET_6318_PCIE_CORE_MASK | \
+ SOFTRESET_6318_PCIE_HARD_MASK)
+#define BCM6318_RESET_PCIE_EXT SOFTRESET_6318_PCIE_EXT_MASK
+
#define BCM6328_RESET_SPI SOFTRESET_6328_SPI_MASK
#define BCM6328_RESET_ENET 0
#define BCM6328_RESET_USBH SOFTRESET_6328_USBH_MASK
@@ -148,6 +165,10 @@ static const u32 bcm3368_reset_bits[] =
__GEN_RESET_BITS_TABLE(3368)
};
+static const u32 bcm6318_reset_bits[] = {
+ __GEN_RESET_BITS_TABLE(6318)
+};
+
static const u32 bcm6328_reset_bits[] = {
__GEN_RESET_BITS_TABLE(6328)
};
@@ -184,6 +205,9 @@ static int __init bcm63xx_reset_bits_ini
if (BCMCPU_IS_3368()) {
reset_reg = PERF_SOFTRESET_6358_REG;
bcm63xx_reset_bits = bcm3368_reset_bits;
+ } else if (BCMCPU_IS_6318()) {
+ reset_reg = PERF_SOFTRESET_6318_REG;
+ bcm63xx_reset_bits = bcm6318_reset_bits;
} else if (BCMCPU_IS_6328()) {
reset_reg = PERF_SOFTRESET_6328_REG;
bcm63xx_reset_bits = bcm6328_reset_bits;
--- a/arch/mips/bcm63xx/setup.c
+++ b/arch/mips/bcm63xx/setup.c
@@ -72,6 +72,9 @@ void bcm63xx_machine_reboot(void)
case BCM3368_CPU_ID:
perf_regs[0] = PERF_EXTIRQ_CFG_REG_3368;
break;
+ case BCM6318_CPU_ID:
+ perf_regs[0] = PERF_EXTIRQ_CFG_REG_6318;
+ break;
case BCM6328_CPU_ID:
perf_regs[0] = PERF_EXTIRQ_CFG_REG_6328;
break;
@@ -111,7 +114,7 @@ void bcm63xx_machine_reboot(void)
bcm6348_a1_reboot();
pr_info("triggering watchdog soft-reset...\n");
- if (BCMCPU_IS_6328()) {
+ if (BCMCPU_IS_6318() || BCMCPU_IS_6328()) {
bcm_wdt_writel(1, WDT_SOFTRESET_REG);
} else {
reg = bcm_perf_readl(PERF_SYS_PLL_CTL_REG);
--- a/arch/mips/include/asm/mach-bcm63xx/bcm63xx_cpu.h
+++ b/arch/mips/include/asm/mach-bcm63xx/bcm63xx_cpu.h
@@ -11,6 +11,7 @@
* arm mach-types)
*/
#define BCM3368_CPU_ID 0x3368
+#define BCM6318_CPU_ID 0x6318
#define BCM6328_CPU_ID 0x6328
#define BCM63281_CPU_ID 0x63281
#define BCM63283_CPU_ID 0x63283
@@ -39,6 +40,10 @@ static inline u32 __pure __bcm63xx_get_c
case BCM3368_CPU_ID:
#endif
+#ifdef CONFIG_BCM63XX_CPU_6318
+ case BCM6318_CPU_ID:
+#endif
+
#ifdef CONFIG_BCM63XX_CPU_6328
case BCM6328_CPU_ID:
#endif
@@ -88,6 +93,7 @@ static inline u32 __pure bcm63xx_get_cpu
}
#define BCMCPU_IS_3368() (bcm63xx_get_cpu_id() == BCM3368_CPU_ID)
+#define BCMCPU_IS_6318() (bcm63xx_get_cpu_id() == BCM6318_CPU_ID)
#define BCMCPU_IS_6328() (bcm63xx_get_cpu_id() == BCM6328_CPU_ID)
#define BCMCPU_IS_6338() (bcm63xx_get_cpu_id() == BCM6338_CPU_ID)
#define BCMCPU_IS_6345() (bcm63xx_get_cpu_id() == BCM6345_CPU_ID)
@@ -99,6 +105,8 @@ static inline u32 __pure bcm63xx_get_cpu
#define BCMCPU_VARIANT_IS_3368() \
(bcm63xx_get_cpu_variant() == BCM3368_CPU_ID)
+#define BCMCPU_VARIANT_IS_6318() \
+ (bcm63xx_get_cpu_variant() == BCM6318_CPU_ID)
#define BCMCPU_VARIANT_IS_63281() \
(bcm63xx_get_cpu_variant() == BCM63281_CPU_ID)
#define BCMCPU_VARIANT_IS_63283() \
@@ -253,6 +261,56 @@ enum bcm63xx_regs_set {
#define BCM_3368_MISC_BASE (0xdeadbeef)
/*
+ * 6318 register sets base address
+ */
+#define BCM_6318_DSL_LMEM_BASE (0xdeadbeef)
+#define BCM_6318_PERF_BASE (0xb0000000)
+#define BCM_6318_TIMER_BASE (0xb0000040)
+#define BCM_6318_WDT_BASE (0xb0000068)
+#define BCM_6318_UART0_BASE (0xb0000100)
+#define BCM_6318_UART1_BASE (0xdeadbeef)
+#define BCM_6318_GPIO_BASE (0xb0000080)
+#define BCM_6318_SPI_BASE (0xdeadbeef)
+#define BCM_6318_HSSPI_BASE (0xb0003000)
+#define BCM_6318_UDC0_BASE (0xdeadbeef)
+#define BCM_6318_USBDMA_BASE (0xb0006800)
+#define BCM_6318_OHCI0_BASE (0xb0005100)
+#define BCM_6318_OHCI_PRIV_BASE (0xdeadbeef)
+#define BCM_6318_USBH_PRIV_BASE (0xb0005200)
+#define BCM_6318_USBD_BASE (0xb0006000)
+#define BCM_6318_MPI_BASE (0xdeadbeef)
+#define BCM_6318_PCMCIA_BASE (0xdeadbeef)
+#define BCM_6318_PCIE_BASE (0xb0010000)
+#define BCM_6318_SDRAM_REGS_BASE (0xdeadbeef)
+#define BCM_6318_DSL_BASE (0xdeadbeef)
+#define BCM_6318_UBUS_BASE (0xdeadbeef)
+#define BCM_6318_ENET0_BASE (0xdeadbeef)
+#define BCM_6318_ENET1_BASE (0xdeadbeef)
+#define BCM_6318_ENETDMA_BASE (0xb0088000)
+#define BCM_6318_ENETDMAC_BASE (0xb0088200)
+#define BCM_6318_ENETDMAS_BASE (0xb0088400)
+#define BCM_6318_ENETSW_BASE (0xb0080000)
+#define BCM_6318_EHCI0_BASE (0xb0005000)
+#define BCM_6318_SDRAM_BASE (0xb0004000)
+#define BCM_6318_MEMC_BASE (0xdeadbeef)
+#define BCM_6318_DDR_BASE (0xdeadbeef)
+#define BCM_6318_M2M_BASE (0xdeadbeef)
+#define BCM_6318_ATM_BASE (0xdeadbeef)
+#define BCM_6318_XTM_BASE (0xdeadbeef)
+#define BCM_6318_XTMDMA_BASE (0xb000c000)
+#define BCM_6318_XTMDMAC_BASE (0xdeadbeef)
+#define BCM_6318_XTMDMAS_BASE (0xdeadbeef)
+#define BCM_6318_PCM_BASE (0xdeadbeef)
+#define BCM_6318_PCMDMA_BASE (0xdeadbeef)
+#define BCM_6318_PCMDMAC_BASE (0xdeadbeef)
+#define BCM_6318_PCMDMAS_BASE (0xdeadbeef)
+#define BCM_6318_RNG_BASE (0xdeadbeef)
+#define BCM_6318_MISC_BASE (0xb0000280)
+#define BCM_6318_OTP_BASE (0xdeadbeef)
+
+#define BCM_6318_STRAP_BASE (0xb0000900)
+
+/*
* 6328 register sets base address
*/
#define BCM_6328_DSL_LMEM_BASE (0xdeadbeef)
@@ -775,6 +833,55 @@ enum bcm63xx_irq {
#define BCM_3368_EXT_IRQ2 (IRQ_INTERNAL_BASE + 27)
#define BCM_3368_EXT_IRQ3 (IRQ_INTERNAL_BASE + 28)
+/*
+ * 6318 irqs
+ */
+#define BCM_6318_HIGH_IRQ_BASE (IRQ_INTERNAL_BASE + 32)
+#define BCM_6318_VERY_HIGH_IRQ_BASE (BCM_6318_HIGH_IRQ_BASE + 32)
+
+#define BCM_6318_TIMER_IRQ (IRQ_INTERNAL_BASE + 31)
+#define BCM_6318_SPI_IRQ 0
+#define BCM_6318_UART0_IRQ (IRQ_INTERNAL_BASE + 28)
+#define BCM_6318_UART1_IRQ 0
+#define BCM_6318_DSL_IRQ (IRQ_INTERNAL_BASE + 21)
+#define BCM_6318_UDC0_IRQ 0
+#define BCM_6318_ENET0_IRQ 0
+#define BCM_6318_ENET1_IRQ 0
+#define BCM_6318_ENET_PHY_IRQ (IRQ_INTERNAL_BASE + 12)
+#define BCM_6318_HSSPI_IRQ (IRQ_INTERNAL_BASE + 29)
+#define BCM_6318_OHCI0_IRQ (BCM_6318_HIGH_IRQ_BASE + 9)
+#define BCM_6318_EHCI0_IRQ (BCM_6318_HIGH_IRQ_BASE + 10)
+#define BCM_6318_USBD_IRQ (IRQ_INTERNAL_BASE + 4)
+#define BCM_6318_USBD_RXDMA0_IRQ (IRQ_INTERNAL_BASE + 5)
+#define BCM_6318_USBD_TXDMA0_IRQ (IRQ_INTERNAL_BASE + 6)
+#define BCM_6318_USBD_RXDMA1_IRQ (IRQ_INTERNAL_BASE + 7)
+#define BCM_6318_USBD_TXDMA1_IRQ (IRQ_INTERNAL_BASE + 8)
+#define BCM_6318_USBD_RXDMA2_IRQ (IRQ_INTERNAL_BASE + 9)
+#define BCM_6318_USBD_TXDMA2_IRQ (IRQ_INTERNAL_BASE + 10)
+#define BCM_6318_PCMCIA_IRQ 0
+#define BCM_6318_ENET0_RXDMA_IRQ 0
+#define BCM_6318_ENET0_TXDMA_IRQ 0
+#define BCM_6318_ENET1_RXDMA_IRQ 0
+#define BCM_6318_ENET1_TXDMA_IRQ 0
+#define BCM_6318_PCI_IRQ (IRQ_INTERNAL_BASE + 23)
+#define BCM_6318_ATM_IRQ 0
+#define BCM_6318_ENETSW_RXDMA0_IRQ (BCM_6318_HIGH_IRQ_BASE + 0)
+#define BCM_6318_ENETSW_RXDMA1_IRQ (BCM_6318_HIGH_IRQ_BASE + 1)
+#define BCM_6318_ENETSW_RXDMA2_IRQ (BCM_6318_HIGH_IRQ_BASE + 2)
+#define BCM_6318_ENETSW_RXDMA3_IRQ (BCM_6318_HIGH_IRQ_BASE + 3)
+#define BCM_6318_ENETSW_TXDMA0_IRQ (BCM_6318_VERY_HIGH_IRQ_BASE + 10)
+#define BCM_6318_ENETSW_TXDMA1_IRQ (BCM_6318_VERY_HIGH_IRQ_BASE + 11)
+#define BCM_6318_ENETSW_TXDMA2_IRQ (BCM_6318_VERY_HIGH_IRQ_BASE + 12)
+#define BCM_6318_ENETSW_TXDMA3_IRQ (BCM_6318_VERY_HIGH_IRQ_BASE + 13)
+#define BCM_6318_XTM_IRQ (BCM_6318_HIGH_IRQ_BASE + 31)
+#define BCM_6318_XTM_DMA0_IRQ (BCM_6318_HIGH_IRQ_BASE + 11)
+
+#define BCM_6318_PCM_DMA0_IRQ (IRQ_INTERNAL_BASE + 2)
+#define BCM_6318_PCM_DMA1_IRQ (IRQ_INTERNAL_BASE + 3)
+#define BCM_6318_EXT_IRQ0 (IRQ_INTERNAL_BASE + 24)
+#define BCM_6318_EXT_IRQ1 (IRQ_INTERNAL_BASE + 25)
+#define BCM_6318_EXT_IRQ2 (IRQ_INTERNAL_BASE + 26)
+#define BCM_6318_EXT_IRQ3 (IRQ_INTERNAL_BASE + 27)
/*
* 6328 irqs
--- a/arch/mips/include/asm/mach-bcm63xx/bcm63xx_regs.h
+++ b/arch/mips/include/asm/mach-bcm63xx/bcm63xx_regs.h
@@ -53,6 +53,39 @@
CKCTL_3368_EMUSB_EN | \
CKCTL_3368_USBU_EN)
+#define CKCTL_6318_ADSL_ASB_EN (1 << 0)
+#define CKCTL_6318_USB_ASB_EN (1 << 1)
+#define CKCTL_6318_MIPS_ASB_EN (1 << 2)
+#define CKCTL_6318_PCIE_ASB_EN (1 << 3)
+#define CKCTL_6318_PHYMIPS_ASB_EN (1 << 4)
+#define CKCTL_6318_ROBOSW_ASB_EN (1 << 5)
+#define CKCTL_6318_SAR_ASB_EN (1 << 6)
+#define CKCTL_6318_SDR_ASB_EN (1 << 7)
+#define CKCTL_6318_SWREG_ASB_EN (1 << 8)
+#define CKCTL_6318_PERIPH_ASB_EN (1 << 9)
+#define CKCTL_6318_CPUBUS160_EN (1 << 10)
+#define CKCTL_6318_ADSL_EN (1 << 11)
+#define CKCTL_6318_SAR125_EN (1 << 12)
+#define CKCTL_6318_MIPS_EN (1 << 13)
+#define CKCTL_6318_PCIE_EN (1 << 14)
+#define CKCTL_6318_ROBOSW250_EN (1 << 16)
+#define CKCTL_6318_ROBOSW025_EN (1 << 17)
+#define CKCTL_6318_SDR_EN (1 << 19)
+#define CKCTL_6318_USB_EN (1 << 20) /* both device and host */
+#define CKCTL_6318_HSSPI_EN (1 << 25)
+#define CKCTL_6318_PCIE25_EN (1 << 27)
+#define CKCTL_6318_PHYMIPS_EN (1 << 28)
+#define CKCTL_6318_ADSL_AFE_EN (1 << 29)
+#define CKCTL_6318_ADSL_QPROC_EN (1 << 30)
+
+#define CKCTL_6318_ALL_SAFE_EN (CKCTL_6318_PHYMIPS_EN | \
+ CKCTL_6318_ADSL_QPROC_EN | \
+ CKCTL_6318_ADSL_AFE_EN | \
+ CKCTL_6318_ADSL_EN | \
+ CKCTL_6318_SAR_EN | \
+ CKCTL_6318_USB_EN | \
+ CKCTL_6318_PCIE_EN)
+
#define CKCTL_6328_PHYMIPS_EN (1 << 0)
#define CKCTL_6328_ADSL_QPROC_EN (1 << 1)
#define CKCTL_6328_ADSL_AFE_EN (1 << 2)
@@ -260,12 +293,27 @@
CKCTL_63268_TBUS_EN | \
CKCTL_63268_ROBOSW250_EN)
+/* UBUS Clock Control register */
+#define PERF_UB_CKCTL_REG 0x10
+
+#define UB_CKCTL_6318_ADSL_EN (1 << 0)
+#define UB_CKCTL_6318_ARB_EN (1 << 1)
+#define UB_CKCTL_6318_MIPS_EN (1 << 2)
+#define UB_CKCTL_6318_PCIE_EN (1 << 3)
+#define UB_CKCTL_6318_PERIPH_EN (1 << 4)
+#define UB_CKCTL_6318_PHYMIPS_EN (1 << 5)
+#define UB_CKCTL_6318_ROBOSW_EN (1 << 6)
+#define UB_CKCTL_6318_SAR_EN (1 << 7)
+#define UB_CKCTL_6318_SDR_EN (1 << 8)
+#define UB_CKCTL_6318_USB_EN (1 << 9)
+
/* System PLL Control register */
#define PERF_SYS_PLL_CTL_REG 0x8
#define SYS_PLL_SOFT_RESET 0x1
/* Interrupt Mask register */
#define PERF_IRQMASK_3368_REG 0xc
+#define PERF_IRQMASK_6318_REG 0x20
#define PERF_IRQMASK_6328_REG(x) (0x20 + (x) * 0x10)
#define PERF_IRQMASK_6338_REG 0xc
#define PERF_IRQMASK_6345_REG 0xc
@@ -277,6 +325,7 @@
/* Interrupt Status register */
#define PERF_IRQSTAT_3368_REG 0x10
+#define PERF_IRQSTAT_6318_REG 0x30
#define PERF_IRQSTAT_6328_REG(x) (0x28 + (x) * 0x10)
#define PERF_IRQSTAT_6338_REG 0x10
#define PERF_IRQSTAT_6345_REG 0x10
@@ -288,6 +337,7 @@
/* External Interrupt Configuration register */
#define PERF_EXTIRQ_CFG_REG_3368 0x14
+#define PERF_EXTIRQ_CFG_REG_6318 0x18
#define PERF_EXTIRQ_CFG_REG_6328 0x18
#define PERF_EXTIRQ_CFG_REG_6338 0x14
#define PERF_EXTIRQ_CFG_REG_6345 0x14
@@ -322,6 +372,7 @@
/* Soft Reset register */
#define PERF_SOFTRESET_REG 0x28
+#define PERF_SOFTRESET_6318_REG 0x10
#define PERF_SOFTRESET_6328_REG 0x10
#define PERF_SOFTRESET_6358_REG 0x34
#define PERF_SOFTRESET_6362_REG 0x10
@@ -335,6 +386,18 @@
#define SOFTRESET_3368_USBS_MASK (1 << 11)
#define SOFTRESET_3368_PCM_MASK (1 << 13)
+#define SOFTRESET_6318_SPI_MASK (1 << 0)
+#define SOFTRESET_6318_EPHY_MASK (1 << 1)
+#define SOFTRESET_6318_SAR_MASK (1 << 2)
+#define SOFTRESET_6318_ENETSW_MASK (1 << 3)
+#define SOFTRESET_6318_USBS_MASK (1 << 4)
+#define SOFTRESET_6318_USBH_MASK (1 << 5)
+#define SOFTRESET_6318_PCIE_CORE_MASK (1 << 6)
+#define SOFTRESET_6318_PCIE_MASK (1 << 7)
+#define SOFTRESET_6318_PCIE_EXT_MASK (1 << 8)
+#define SOFTRESET_6318_PCIE_HARD_MASK (1 << 9)
+#define SOFTRESET_6318_ADSL_MASK (1 << 10)
+
#define SOFTRESET_6328_SPI_MASK (1 << 0)
#define SOFTRESET_6328_EPHY_MASK (1 << 1)
#define SOFTRESET_6328_SAR_MASK (1 << 2)
@@ -506,8 +569,17 @@
#define TIMER_IRQSTAT_TIMER1_IR_EN (1 << 9)
#define TIMER_IRQSTAT_TIMER2_IR_EN (1 << 10)
+#define TIMER_IRQMASK_6318_REG 0x0
+#define TIMER_IRQSTAT_6318_REG 0x4
+#define IRQSTATMASK_TIMER0 (1 << 0)
+#define IRQSTATMASK_TIMER1 (1 << 1)
+#define IRQSTATMASK_TIMER2 (1 << 2)
+#define IRQSTATMASK_TIMER3 (1 << 3)
+#define IRQSTATMASK_WDT (1 << 4)
+
/* Timer control register */
#define TIMER_CTLx_REG(x) (0x4 + (x * 4))
+#define TIMER_CTRx_6318_REG(x) (0x8 + (x * 4))
#define TIMER_CTL0_REG 0x4
#define TIMER_CTL1_REG 0x8
#define TIMER_CTL2_REG 0xC
@@ -1254,6 +1326,8 @@
#define SDRAM_CFG_32B_MASK (1 << SDRAM_CFG_32B_SHIFT)
#define SDRAM_CFG_BANK_SHIFT 13
#define SDRAM_CFG_BANK_MASK (1 << SDRAM_CFG_BANK_SHIFT)
+#define SDRAM_CFG_6318_SPACE_SHIFT 4
+#define SDRAM_CFG_6318_SPACE_MASK (0xf << SDRAM_CFG_6318_SPACE_SHIFT)
#define SDRAM_MBASE_REG 0xc
--- a/arch/mips/include/asm/mach-bcm63xx/ioremap.h
+++ b/arch/mips/include/asm/mach-bcm63xx/ioremap.h
@@ -23,6 +23,7 @@ static inline int is_bcm63xx_internal_re
if (offset >= 0xfff00000)
return 1;
break;
+ case BCM6318_CPU_ID:
case BCM6328_CPU_ID:
case BCM6362_CPU_ID:
case BCM6368_CPU_ID:
--- a/arch/mips/bcm63xx/dev-hsspi.c
+++ b/arch/mips/bcm63xx/dev-hsspi.c
@@ -35,7 +35,8 @@ static struct platform_device bcm63xx_hs
int __init bcm63xx_hsspi_register(void)
{
- if (!BCMCPU_IS_6328() && !BCMCPU_IS_6362() && !BCMCPU_IS_63268())
+ if (!BCMCPU_IS_6318() && !BCMCPU_IS_6328() && !BCMCPU_IS_6362() &&
+ !BCMCPU_IS_63268())
return -ENODEV;
spi_resources[0].start = bcm63xx_regset_address(RSET_HSSPI);
--- a/arch/mips/bcm63xx/dev-usb-usbd.c
+++ b/arch/mips/bcm63xx/dev-usb-usbd.c
@@ -41,7 +41,7 @@ int __init bcm63xx_usbd_register(const s
IRQ_USBD_RXDMA2, IRQ_USBD_TXDMA2 };
int i;
- if (!BCMCPU_IS_6328() && !BCMCPU_IS_6368())
+ if (!BCMCPU_IS_6318() && !BCMCPU_IS_6328() && !BCMCPU_IS_6368())
return 0;
usbd_resources[0].start = bcm63xx_regset_address(RSET_USBD);
--- a/arch/mips/bcm63xx/dev-enet.c
+++ b/arch/mips/bcm63xx/dev-enet.c
@@ -184,8 +184,8 @@ static int __init register_shared(void)
else
shared_res[0].end += (RSET_ENETDMA_SIZE) - 1;
- if (BCMCPU_IS_6328() || BCMCPU_IS_6362() || BCMCPU_IS_6368() ||
- BCMCPU_IS_63268())
+ if (BCMCPU_IS_6318() || BCMCPU_IS_6328() || BCMCPU_IS_6362() ||
+ BCMCPU_IS_6368() || BCMCPU_IS_63268())
chan_count = 32;
else if (BCMCPU_IS_6345())
chan_count = 8;
@@ -293,8 +293,8 @@ bcm63xx_enetsw_register(const struct bcm
{
int ret;
- if (!BCMCPU_IS_6328() && !BCMCPU_IS_6362() && !BCMCPU_IS_6368() &&
- !BCMCPU_IS_63268())
+ if (!BCMCPU_IS_6318() && !BCMCPU_IS_6328() && !BCMCPU_IS_6362() &&
+ !BCMCPU_IS_6368() && !BCMCPU_IS_63268())
return -ENODEV;
ret = register_shared();
@@ -311,7 +311,7 @@ bcm63xx_enetsw_register(const struct bcm
memcpy(bcm63xx_enetsw_device.dev.platform_data, pd, sizeof(*pd));
- if (BCMCPU_IS_6328())
+ if (BCMCPU_IS_6318() || BCMCPU_IS_6328())
enetsw_pd.num_ports = ENETSW_PORTS_6328;
else if (BCMCPU_IS_6362() || BCMCPU_IS_6368())
enetsw_pd.num_ports = ENETSW_PORTS_6368;
--- a/arch/mips/include/asm/mach-bcm63xx/bcm63xx_gpio.h
+++ b/arch/mips/include/asm/mach-bcm63xx/bcm63xx_gpio.h
@@ -10,6 +10,8 @@ int __init bcm63xx_gpio_init(void);
static inline unsigned long bcm63xx_gpio_count(void)
{
switch (bcm63xx_get_cpu_id()) {
+ case BCM6318_CPU_ID:
+ return 50;
case BCM6328_CPU_ID:
return 32;
case BCM3368_CPU_ID:
--- a/arch/mips/bcm63xx/dev-usb-ehci.c
+++ b/arch/mips/bcm63xx/dev-usb-ehci.c
@@ -81,7 +81,8 @@ static struct platform_device bcm63xx_eh
int __init bcm63xx_ehci_register(void)
{
- if (!BCMCPU_IS_6328() && !BCMCPU_IS_6358() && !BCMCPU_IS_6362() && !BCMCPU_IS_6368())
+ if (!BCMCPU_IS_6318() && !BCMCPU_IS_6328() && !BCMCPU_IS_6358() &&
+ !BCMCPU_IS_6362() && !BCMCPU_IS_6368())
return 0;
ehci_resources[0].start = bcm63xx_regset_address(RSET_EHCI0);
Reference in New Issue View Git Blame Copy Permalink