mirror of
https://github.com/openwrt/openwrt.git
synced 2024-12-28 17:48:58 +00:00
7d7aa2fd92
This change makes the names of Broadcom targets consistent by using the common notation based on SoC/CPU ID (which is used internally anyway), bcmXXXX instead of brcmXXXX. This is even used for target TITLE in make menuconfig already, only the short target name used brcm so far. Despite, since subtargets range from bcm2708 to bcm2711, it seems appropriate to use bcm27xx instead of bcm2708 (again, as already done for BOARDNAME). This also renames the packages brcm2708-userland and brcm2708-gpu-fw. Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de> Acked-by: Álvaro Fernández Rojas <noltari@gmail.com>
79 lines
2.7 KiB
Diff
79 lines
2.7 KiB
Diff
From 531ae7af75b2be2867814693f069fb51e3155341 Mon Sep 17 00:00:00 2001
|
|
From: Phil Elwell <phil@raspberrypi.org>
|
|
Date: Wed, 12 Jun 2019 17:32:11 +0100
|
|
Subject: [PATCH] overlays: Update w1-gpio and w1-gpio-pullup
|
|
|
|
The parasitic power (power on data) feature is now enabled by
|
|
default in the w1-gpio driver, so update the README and make the
|
|
"pullup" parameter a no-op.
|
|
|
|
Signed-off-by: Phil Elwell <phil@raspberrypi.org>
|
|
---
|
|
arch/arm/boot/dts/overlays/README | 9 ++-------
|
|
arch/arm/boot/dts/overlays/w1-gpio-overlay.dts | 3 +--
|
|
arch/arm/boot/dts/overlays/w1-gpio-pullup-overlay.dts | 3 +--
|
|
3 files changed, 4 insertions(+), 11 deletions(-)
|
|
|
|
--- a/arch/arm/boot/dts/overlays/README
|
|
+++ b/arch/arm/boot/dts/overlays/README
|
|
@@ -2261,9 +2261,7 @@ Info: Configures the w1-gpio Onewire i
|
|
Use this overlay if you *don't* need a GPIO to drive an external pullup.
|
|
Load: dtoverlay=w1-gpio,<param>=<val>
|
|
Params: gpiopin GPIO for I/O (default "4")
|
|
-
|
|
- pullup Non-zero, "on", or "y" to enable the parasitic
|
|
- power (2-wire, power-on-data) feature
|
|
+ pullup Now enabled by default (ignored)
|
|
|
|
|
|
Name: w1-gpio-pullup
|
|
@@ -2271,11 +2269,8 @@ Info: Configures the w1-gpio Onewire i
|
|
Use this overlay if you *do* need a GPIO to drive an external pullup.
|
|
Load: dtoverlay=w1-gpio-pullup,<param>=<val>
|
|
Params: gpiopin GPIO for I/O (default "4")
|
|
-
|
|
- pullup Non-zero, "on", or "y" to enable the parasitic
|
|
- power (2-wire, power-on-data) feature
|
|
-
|
|
extpullup GPIO for external pullup (default "5")
|
|
+ pullup Now enabled by default (ignored)
|
|
|
|
|
|
Name: wittypi
|
|
--- a/arch/arm/boot/dts/overlays/w1-gpio-overlay.dts
|
|
+++ b/arch/arm/boot/dts/overlays/w1-gpio-overlay.dts
|
|
@@ -14,7 +14,6 @@
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&w1_pins>;
|
|
gpios = <&gpio 4 0>;
|
|
- rpi,parasitic-power = <0>;
|
|
status = "okay";
|
|
};
|
|
};
|
|
@@ -36,6 +35,6 @@
|
|
<&w1>,"reg:0",
|
|
<&w1_pins>,"brcm,pins:0",
|
|
<&w1_pins>,"reg:0";
|
|
- pullup = <&w1>,"rpi,parasitic-power:0";
|
|
+ pullup; // Silently ignore unneeded parameter
|
|
};
|
|
};
|
|
--- a/arch/arm/boot/dts/overlays/w1-gpio-pullup-overlay.dts
|
|
+++ b/arch/arm/boot/dts/overlays/w1-gpio-pullup-overlay.dts
|
|
@@ -14,7 +14,6 @@
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&w1_pins>;
|
|
gpios = <&gpio 4 0>, <&gpio 5 1>;
|
|
- rpi,parasitic-power = <0>;
|
|
status = "okay";
|
|
};
|
|
};
|
|
@@ -38,6 +37,6 @@
|
|
<&w1_pins>,"reg:0";
|
|
extpullup = <&w1>,"gpios:16",
|
|
<&w1_pins>,"brcm,pins:4";
|
|
- pullup = <&w1>,"rpi,parasitic-power:0";
|
|
+ pullup; // Silently ignore unneeded parameter
|
|
};
|
|
};
|