mirror of
https://github.com/openwrt/openwrt.git
synced 2024-12-28 01:28:59 +00:00
d4c999bb89
backport from wireless-drivers-next, replacing some existing patches in our tree (marked with '=' are those which were already present): f483039cf51a rt2x00: use simple_read_from_buffer() =5c656c71b1bf rt2800: move usb specific txdone/txstatus routines to rt2800lib =0b0d556e0ebb rt2800mmio: use txdone/txstatus routines from lib =5022efb50f62 rt2x00: do not check for txstatus timeout every time on tasklet =adf26a356f13 rt2x00: use different txstatus timeouts when flushing =0240564430c0 rt2800: flush and txstatus rework for rt2800mmio 6eba8fd22352 rt2x00: rt2400pci: mark expected switch fall-through 10bb92217747 rt2x00: rt2500pci: mark expected switch fall-through 916e6bbcfcff rt2x00: rt2800lib: mark expected switch fall-throughs 641dd8068ecb rt2x00: rt61pci: mark expected switch fall-through 750afb08ca71 cross-tree: phase out dma_zalloc_coherent() =c2e28ef7711f rt2x00: reduce tx power to nominal level on RT6352 a4296994eb80 rt2x00: Work around a firmware bug with shared keys 2587791d5758 rt2x00: no need to check return value of debugfs_create functions pending on linux-wireless: rt2x00: remove unneeded check rt2x00: remove confusing AGC register rt2800: enable TX_PIN_CFG_LNA_PE_ bits per band rt2800: enable TX_PIN_CFG_RFRX_EN only for MT7620 rt2800: comment and simplify AGC init for RT6352 rt2x00: do not print error when queue is full rt2800: partially restore old mmio txstatus behaviour rt2800: new flush implementation for SoC devices rt2800: move txstatus pending routine rt2800mmio: fetch tx status changes rt2800mmio: use timer and work for handling tx statuses timeouts rt2x00: remove last_nostatus_check rt2x00: remove not used entry field rt2x00mmio: remove legacy comment While at it also rename some existing patches now that there are separate folders with patches for each driver to make things a bit nicer to handle. Signed-off-by: Daniel Golle <daniel@makrotopia.org>
41 lines
1.3 KiB
Diff
41 lines
1.3 KiB
Diff
--- a/drivers/net/wireless/ralink/rt2x00/rt2800lib.c
|
|
+++ b/drivers/net/wireless/ralink/rt2x00/rt2800lib.c
|
|
@@ -36,6 +36,7 @@
|
|
#include <linux/kernel.h>
|
|
#include <linux/module.h>
|
|
#include <linux/slab.h>
|
|
+#include <linux/of.h>
|
|
|
|
#include "rt2x00.h"
|
|
#include "rt2800lib.h"
|
|
@@ -9458,6 +9459,17 @@ static int rt2800_init_eeprom(struct rt2
|
|
rt2800_init_led(rt2x00dev, &rt2x00dev->led_assoc, LED_TYPE_ASSOC);
|
|
rt2800_init_led(rt2x00dev, &rt2x00dev->led_qual, LED_TYPE_QUALITY);
|
|
|
|
+ {
|
|
+ struct device_node *np = rt2x00dev->dev->of_node;
|
|
+ unsigned int led_polarity;
|
|
+
|
|
+ /* Allow overriding polarity from OF */
|
|
+ if (!of_property_read_u32(np, "ralink,led-polarity",
|
|
+ &led_polarity))
|
|
+ rt2x00_set_field16(&eeprom, EEPROM_FREQ_LED_POLARITY,
|
|
+ led_polarity);
|
|
+ }
|
|
+
|
|
rt2x00dev->led_mcu_reg = eeprom;
|
|
#endif /* CPTCFG_RT2X00_LIB_LEDS */
|
|
|
|
--- a/drivers/net/wireless/ralink/rt2x00/rt2x00leds.c
|
|
+++ b/drivers/net/wireless/ralink/rt2x00/rt2x00leds.c
|
|
@@ -109,6 +109,9 @@ static int rt2x00leds_register_led(struc
|
|
led->led_dev.name = name;
|
|
led->led_dev.brightness = LED_OFF;
|
|
|
|
+ if (rt2x00_is_soc(rt2x00dev))
|
|
+ led->led_dev.brightness_set(&led->led_dev, LED_OFF);
|
|
+
|
|
retval = led_classdev_register(device, &led->led_dev);
|
|
if (retval) {
|
|
rt2x00_err(rt2x00dev, "Failed to register led handler\n");
|