openwrt/package/firmware/ipq-wifi
TruongSinh Tran-Nguyen febc2b831f
ipq40xx: add support for GL.iNet GL-B2200
This patch adds supports for the GL-B2200 router.

Specifications:
  - SOC: Qualcomm IPQ4019 ARM Quad-Core
  - RAM: 512 MiB
  - Flash: 16 MiB NOR - SPI0
  - EMMC: 8GB EMMC
  - ETH: Qualcomm QCA8075
  - WLAN1: Qualcomm Atheros QCA4019 2.4GHz 802.11b/g/n 2x2
  - WLAN2: Qualcomm Atheros QCA4019 5GHz 802.11n/ac W2 2x2
  - WLAN3: Qualcomm Atheros QCA9886 5GHz 802.11n/ac W2 2x2
  - INPUT: Reset, WPS
  - LED: Power, Internet
  - UART1: On board pin header near to LED (3.3V, TX, RX, GND), 3.3V without pin - 115200 8N1
  - UART2: On board with BLE module
  - SPI1: On board socket for Zigbee module

Update firmware instructions:
Please update the firmware via U-Boot web UI (by default at 192.168.1.1, following instructions found at
https://docs.gl-inet.com/en/3/troubleshooting/debrick/).
Normal sysupgrade, either via CLI or LuCI, is not possible from stock firmware.
Please do use the *gl-b2200-squashfs-emmc.img file, gunzipping the produced *gl-b2200-squashfs-emmc.img.gz one first.

What's working:
- WiFi 2G, 5G
- WPA2/WPA3

Not tested:
- Bluetooth LE/Zigbee

Credits goes to the original authors of this patch.

V1->V2:
- updates *arm-boot-add-dts-files.patch correctly (sorry, my mistake)
- add uboot-envtools support
V2->V3:
- Li Zhang updated official patch to fix wrong MAC address on wlan0 (PCI) interface
V3->V4:
- wire up sysupgrade

Signed-off-by: Li Zhang <li.zhang@gl-inet.com>
[fix tab and trailing space, document what's working and what's not]
Signed-off-by: TruongSinh Tran-Nguyen <i@truongsinh.pro>
[rebase on top of master, address remaining comments]
Signed-off-by: Enrico Mioso <mrkiko.rs@gmail.com>
[remove redundant check in platform.sh]
Signed-off-by: Daniel Golle <daniel@makrotopia.org>
2021-12-02 20:43:07 +00:00
..
board-8dev_habanero-dvk.qca4019 ipq40xx: add support for 8devices Habanero DVK 2020-03-09 00:53:50 +01:00
board-aruba_ap-303.qca4019 ipq-wifi: add BDF for Aruba AP-303 2019-12-20 17:48:52 +01:00
board-avm_fritzrepeater-1200.qca4019 ipq-wifi: add AVM FRITZ!Repeater 1200 bdf 2019-10-23 01:17:28 +02:00
board-buffalo_wtr-m2133hp.qca4019 ipq40xx: add support for Buffalo WTR-M2133HP 2020-07-08 16:07:05 +02:00
board-buffalo_wtr-m2133hp.qca9984 ipq40xx: add support for Buffalo WTR-M2133HP 2020-07-08 16:07:05 +02:00
board-cellc_rtl30vw.qca4019 ipq40xx: add support for Cell C RTL30VW 2020-04-10 15:22:26 +02:00
board-devolo_magic-2-wifi-next.qca4019 ipq40xx: add support for devolo Magic 2 WiFi next 2020-12-22 20:55:40 +01:00
board-dlink_dap2610.qca4019 ipq40xx: Add support for D-Link DAP-2610 2020-01-26 01:20:45 +01:00
board-edgecore_ecw5410.qca9984 ipq806x: add Edgecore ECW5410 support 2020-09-17 08:42:17 +02:00
board-edgecore_oap100.qca4019 ipq40xx: add Edgecore OAP-100 support 2020-09-17 08:43:07 +02:00
board-engenius_eap2200.qca4019 ipq40xx: add support for EnGenius EAP2200 2020-02-28 22:29:10 +01:00
board-engenius_eap2200.qca9888 ipq40xx: add support for EnGenius EAP2200 2020-02-28 22:29:10 +01:00
board-engenius_emd1.qca4019 ipq40xx: add support for EnGenius EMD1 2020-01-26 01:20:45 +01:00
board-engenius_emr3500.qca4019 ipq40xx: add support for EnGenius EMR3500 2020-06-13 14:38:03 +02:00
board-ezviz_cs-w3-wd1200g-eup.qca4019 ipq40xx: add support for EZVIZ CS-W3-WD1200G EUP 2020-01-12 15:57:58 +01:00
board-glinet_gl-ap1300.qca4019 ipq40xx: add support for GL.iNet GL-AP1300 2020-12-25 10:38:13 +01:00
board-glinet_gl-b2200.qca4019 ipq40xx: add support for GL.iNet GL-B2200 2021-12-02 20:43:07 +00:00
board-glinet_gl-b2200.qca9888 ipq40xx: add support for GL.iNet GL-B2200 2021-12-02 20:43:07 +00:00
board-glinet_gl-s1300.qca4019 ipq40xx: add support for GL.iNet GL-S1300 2020-07-08 16:07:05 +02:00
board-linksys_ea8300.qca4019 ipq40xx: Add support for Linksys EA8300 (Dallas) 2019-05-18 13:43:54 +02:00
board-linksys_ea8300.qca9888 ipq40xx: Add support for Linksys EA8300 (Dallas) 2019-05-18 13:43:54 +02:00
board-linksys_mr8300-v0.qca4019 ipq40xx: Add support for Linksys MR8300 (Dallas) 2020-09-25 19:31:51 +02:00
board-linksys_mr8300-v0.qca9888 ipq40xx: Add support for Linksys MR8300 (Dallas) 2020-09-25 19:31:51 +02:00
board-luma_wrtq-329acn.qca4019 ipq40xx: add support for Luma Home WRTQ-329ACN 2020-09-25 19:30:19 +02:00
board-mikrotik_hap-ac2.qca4019 ipq40xx: add MikroTik hAP ac2 support 2021-04-05 04:13:28 +02:00
board-mikrotik_hap-ac3.qca4019 ipq40xx: add support for MikroTik hAP ac3 2021-11-28 17:19:52 +01:00
board-mikrotik_sxtsq-5-ac.qca4019 ipq40xx: add support for MikroTik SXTsq 5 ac 2021-04-29 10:55:07 +02:00
board-mobipromo_cm520-79f.qca4019 ipq40xx: add support for MobiPromo CM520-79F 2020-04-10 15:22:26 +02:00
board-nec_wg2600hp3.qca9984 ipq806x: add support for NEC Platforms Aterm WG2600HP3 2020-12-25 10:38:13 +01:00
board-p2w_r619ac.qca4019 ipq40xx: add support for P&W R619AC (aka G-DOCK 2.0) 2021-11-14 14:28:34 +01:00
board-plasmacloud_pa1200.qca4019 ipq-wifi: Work around Plasma Cloud PA1200 5GHz crash 2021-09-23 20:50:58 +02:00
board-plasmacloud_pa2200.qca4019 ipq-wifi: Fix suffix for Plasma Cloud PA2200 QCA4019 board-2.bin 2020-12-25 10:38:13 +01:00
board-plasmacloud_pa2200.qca9888 ipq40xx: add support for Plasma Cloud PA2200 2020-12-22 19:11:50 +01:00
board-qxwlan_e2600ac.qca4019 ipq-wifi: drop deprecated .bin support 2020-01-26 01:20:46 +01:00
board-teltonika_rutx.qca4019 ipq40xx: Add support for Teltonika RUTX10 2021-11-28 18:39:01 +01:00
Makefile ipq40xx: add support for GL.iNet GL-B2200 2021-12-02 20:43:07 +00:00